0
RESEARCH PAPERS

Fluid Flow Through a Class of Highly-Deformable Porous Media. Part I: Experiments With Air

[+] Author and Article Information
G. S. Beavers, A. Hajji

Department of Aerospace Engineering and Mechanics, University of Minnesota, Minneapolis, Minn. 55455

E. M. Sparrow

Department of Mechanical Engineering, University of Minnesota, Minneapolis, Minn. 55455

J. Fluids Eng 103(3), 432-438 (Sep 01, 1981) (7 pages) doi:10.1115/1.3240807 History: Received March 26, 1980; Online October 26, 2009

Abstract

This paper, together with a companion paper which follows, describes a many-faceted experimental investigation aimed at determining basic characteristics of fluid flow through deformable porous media. A major focus of the work is to establish the validity and the range of applicability of a simple analytical model for the fluid flow. The present paper describes experiments with a gas (air) as the working fluid, while the companion paper (Part II) deals with liquid-flow (i.e., water-flow) experiments. The experiments encompassed three distinct phases. In the first phase, the stress-deformation characteristics were measured (without fluid flow). In the second, flow-related material properties that are relevant to the analytical model (e.g., permeability, Forchheimer coefficient) were determined. The third phase consisted of measurements of mass flow rate as a function of applied pressure differential. The results of the first two phases were used as input to the analytical model, which yielded predictions of mass flow versus applied pressure. These predictions were shown to be in very good agreement with the experimental results, for those conditions where the model is applicable. Two unusual features of the participating deformable materials (polyurethane foams) were encountered, namely, a decrease of cross-sectional area with increasing compression and a slow relaxation of the internal stresses at a fixed compression.

Copyright © 1981 by ASME
Your Session has timed out. Please sign back in to continue.

References

Figures

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In