The Initiation Of Gaseous Microbubble Growth In Laminar Separation Bubbles

[+] Author and Article Information
B. R. Parkin

Applied Research Laboratory, The Pennsylvania State University, State College, Pa. 16801

J. Fluids Eng 103(4), 543-549 (Dec 01, 1981) (7 pages) doi:10.1115/1.3241763 History: Received February 25, 1980; Online October 26, 2009


Flow conditions surrounding bubble-ring cavitation inception on hemispherical headforms are analyzed with respect to the initiation of air diffusion into microbubbles as is observed to occur at fixed positions in the boundary layer. Fairly recent observations have shown this phenomenon to occur in the laminar separation bubble on the body. The analysis shows, in agreement with the body of experimental evidence now available, that gaseous growth must be preceded by a period of vaporous growth starting in regions of low pressure upstream of the laminar separation bubble. It also appears that the most favorable condition for the initiation of gaseous growth should occur when a typical vapor bubble reaches its maximum radius as it enters the laminar separation bubble. The conditions for the initiation of subsequent gaseous growth, once the cavitation bubble is stabilized in the laminar separation zone, are more demanding. Nevertheless, it is found that the liquid in the water surrounding the bubble in the separation zone is definitely supersaturated for most flows of experimental or practical interest. Therefore, gaseous growth, as well as vaporous growth, is definitely to be associated with the onset of bubble-ring cavitation on both theoretical and experimental grounds.

Copyright © 1981 by ASME
Your Session has timed out. Please sign back in to continue.






Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In