0
TECHNICAL BRIEFS

Visualization of the Wing-Tip Vortex in Temporal and Spatial Pressure Gradients

[+] Author and Article Information
X. Liang

Thermal Engineering Department, Tsinghua University, Beijing, People’s Republic of China

B. R. Ramaprian

Department of Mechanical and Materials Engineering, Washington State University, Pullman, WA 99164-2920

J. Fluids Eng 113(3), 511-515 (Sep 01, 1991) (5 pages) doi:10.1115/1.2909527 History: Received January 25, 1990; Online May 23, 2008

Abstract

The evolution of the longitudinal vortex in the near field of a rectangular wing has been visualized using smoke and laser light sheet. The smoke photographs have been used to obtain qualitative and some quantitative information on the effect of small temporal and spatial pressure gradients on the evolution of the vortex in this region. The experiments indicate that even small temporal retardation of the flow can produce a significant increase in the vortex size. This effect becomes larger with increase in retardation, angle of incidence and distance downstream from the trailing edge. Also, vortex “breakdown” was found to occur in many temporal-deceleration experiments. The vortex evolution was, however, found to be relatively insensitive to the presence of small spatial adverse pressure gradients along the flow direction. The study is preliminary in nature and needs to be supported by more extensive quantitative measurements.

Copyright © 1991 by The American Society of Mechanical Engineers
Your Session has timed out. Please sign back in to continue.

References

Figures

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In