Determination and Characteristics of the Transition to Two-Phase Slug Flow in Small Horizontal Channels

[+] Author and Article Information
M. W. Wambsganss, J. A. Jendrzejczyk

Materials and Components Technology Division, Argonne National Laboratory, Argonne, IL 60439

D. M. France

University of Illinois at Chicago, Department of Mechanical Engineering, Chicago, IL 60680

J. Fluids Eng 116(1), 140-146 (Mar 01, 1994) (7 pages) doi:10.1115/1.2910222 History: Received June 26, 1992; Revised March 30, 1993; Online May 23, 2008


Two-phase pressure drop and fluctuating static pressures were measured in a small horizontal rectangular channel (hydraulic diameter = 5.44 mm). The two-phase fluid was an air/water mixture at atmospheric pressure tested over a mass flux range of 50 to 2000 kg/m2 ̇s. Two-phase flow patterns were identified and an objective method was found for determining the flow pattern transition from bubble or plug flow to slug flow. The method is based on an RMS static pressure measurement. In particular, it is shown that the transition is accompanied by a clear and abrupt increase in the RMS pressure when plotted as a function of mass quality. Use of the RMS pressure as a two-phase flow pattern transition indicator is shown to have advantages over pressure-versus-time trace evaluations reported in the literature. The transition is substantiated by a clear local change in slope in the curve of two-phase pressure drop plotted as a function of either Martinelli parameter or mass quality. For high mass fluxes, the change in slope is distinguished by a local peak. Some degree of substantiation was found in previous work for both of the results (the RMS static pressure change and the local pressure drop change) at the transition to slug flow.

Copyright © 1994 by The American Society of Mechanical Engineers
Your Session has timed out. Please sign back in to continue.






Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In