0
RESEARCH PAPERS

Numerical Simulation of the Effects of Rotor-Stator Spacing and Wake/Blade Count Ratio on Turbomachinery Unsteady Flows

[+] Author and Article Information
W.-S. Yu, B. Lakshminarayana

Center for Gas Turbines and Power, The Pennsylvania State University, University Park, PA 16802

J. Fluids Eng 117(4), 639-646 (Dec 01, 1995) (8 pages) doi:10.1115/1.2817316 History: Received April 20, 1994; Revised June 08, 1995; Online December 04, 2007

Abstract

A two-dimensional time-accurate Navier-Stokes solver for incompressible flows is used to simulate the effects of the axial spacing between an upstream rotor and a stator, and the wake/blade count ratio on turbomachinery unsteady flows. The code uses a pressure-based method. A low-Reynolds number two-equation turbulence model is incorporated to account for the turbulence effect. By computing cases with different spacing between an upstream rotor wake and a stator, the effect of the spacing is simulated. Wake/blade count ratio effect is simulated by varying the number of rotor wakes in one stator passage at the computational inlet plane. Results on surface pressure, unsteady velocity vectors, blade boundary layer profiles, rotor wake decay and loss coefficient for all the cases are interpreted. It is found that the unsteadiness in the stator blade passage increases with a decrease in the blade row spacing and a decrease in the wake/blade count ratio. The reduced frequency effect is dominant in the wake/blade count ratio simulation. The time averaged loss coefficient increases with a decrease in the axial blade row spacing and an increase in the wake/blade count ratio.

Copyright © 1995 by The American Society of Mechanical Engineers
Your Session has timed out. Please sign back in to continue.

References

Figures

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In