0
ADDITIONAL TECHNICAL PAPERS

Concentration Measurements in a Pressurized and Heated Gas Mixture Flow Using Laser Induced Fluorescence

[+] Author and Article Information
Philippe Guibert, William Perrard, Céline Morin

Laboratoire de Mécanique Physique, Groupe Fluides Réactifs, Université Pierre et Marie Curie Paris 6-CNRS, 2, place de la Gare de Ceinture, 78210 Saint-Cyr-l’Ecole, France

J. Fluids Eng 124(2), 512-522 (May 28, 2002) (11 pages) doi:10.1115/1.1456462 History: Received November 01, 2000; Revised December 19, 2001; Online May 28, 2002
Copyright © 2002 by ASME
Your Session has timed out. Please sign back in to continue.

References

Zhao,  H., and Ladommatos,  N., 1998, “Optical diagnostics for in-cylinder mixture formation measurements in IC engines,” Prog. Energy Combust. Sci., 24, pp. 297–336.
Fujikawa, T., Hattori, Y., and Akihama, K., 1997, “Quantitative 2-D fuel distribution measurements in a SI engine using laser-induced fluorescence with suitable combination of fluorescence tracer and excitation wavelength,” SAE Paper 972944.
Neij,  H., Johansson,  B., and Alden,  M., 1994, “Development and demonstration of 2D-LIF for studies of mixture preparation in SI engines,” Combust. Flame, 99, pp. 449–457.
Johansson, B., Neij, H., Alden, M., and Juhlin, G., 1995, “Investigations of the influence of mixture preparation on cyclic variations in a SI-engine using laser induced fluorescence,” SAE Paper 950108.
Itoh, T., Kakuho, A., Hishinuma, H., Urushiahara, T., Takagi, Y., Horie, K., Asano, M., Ogata, E., and Yamasita, T., 1995, “Development of a new compound fuel and fluorescent tracer combination for use with laser induced fluorescence,” SAE Paper 952465.
Urushihara,  T., Nakata,  T., Kakuhou,  A., and Takagi,  Y., 1996, “Effects of swirl and tumble motion on fuel vapor behavior and mixture stratification in lean burn engine,” JSAE Review, 17, pp. 239–244.
Hishinuma,  H., Urushihara,  T., Kakuho,  A., and Itoh,  T., 1996, “Development of a technique for quantifying in-cylinder A/F ratio distribution using LIF image processing,” JSAE Review, 17, pp. 355–359.
Reboux, J., Puechberty, D., and Dionnet, F., 1994, “A new approach of planar laser induced fluorescence applied to fuel/air ratio measurement in the compression stroke of an optical S. I. engine,” SAE Paper 941988.
Reboux, J., Puechberty, D., and Dionnet, F., 1996, “Study of mixture inhomogeneities and combustion development in a S. I. engine using a new approach of laser induced fluorescence (FARLIF),” SAE Paper 961205.
Knapp, M., Beushausen, V., Hentschel, W., Manz, P., Grünefeld, G., and Andresen, P., 1997, “In-cylinder mixture formation analysis with spontaneous raman scattering applied to a mass-production SI engine,” SAE Paper 970827.
Kim, K. S., Choi, M. S., Lee, C. H., and Kim, W. T., 1997, “In-cylinder fuel distribution measurements using PLIF in a SI engine,” SAE Paper 970509.
Krämer, H., Einecke, S., Schulz, C., Sick, V., Nattrass, S. R., and Kitching, J. S., 1998, “Simultaneous mapping of the distribution of different fuel volatility classes using tracer-LIF and NIR-tomagraphy in an IC engine,” SAE Paper 982467.
Ghandi, J. B., and Bracco, F. V., 1995, “Fuel distribution effects on the combustion of a direct-injection stratified-charge engine,” SAE Paper 950460.
Fujikawa,  T., Hattori,  Y., Koike,  M., Akihama,  K., Kobayashi,  T., and Matsushita,  S., 1999, “Quantitative 2-D fuel distribution measurements in a direct-injection gasoline engine using laser-induced fluorescence technique,” JSME Int. J., Ser B, 42, No. 4, pp. 760–767.
Arnold, A., Buschmann, A., Cousyn, B., Decker, M., Vannobel, F., Sick, V., and Wolfrum, J., 1993, “Simultaneous imaging of fuel and hydroxyl radicals in an in-line four cylinder SI engine,” SAE Paper 932696.
Wolff, D., Beushausen, V., Schlüter, H., Andresen, P., Hentschel, W., Manz, P., and Arndt, S., 1994, “Quantitative 2D-mixture fraction imaging inside an internal combustion engine using aceton-fluorescence,” International Symposium COMODIA 94, pp. 445–451.
Swindal, J. C., Dragonetti, D. P., Hahn, R. T., Furman, P. A., and Acker, W. P., 1995, “In-cylinder charge homogeneity during cold-start studied with fluorescent tracers simulating different fuel distillation temperatures,” SAE Paper 950106.
Meyer, J., Haug, M., Schreiber, M, and Unverzagt, S., 1995, “Controlling combustion in a spark ignition engine by quantitative fuel distribution,” SAE Paper 950107.
Berckmüller, M., Tait, N. P., and Greenhalgh, D. A., 1996, “The time history of the mixture formation process in a lean burn stratified-charge engine,” SAE Paper 961929.
Berckmüller, M., Tait, N. P., and Greenhalgh, D. A., 1997, “The influence of local fuel concentration on cyclic variability of a lean burn stratified-charge engine,” SAE Paper 970826.
Baritaud, T. A., and Heinze, T. A., 1992, “Gasoline distributions measurements with PLIF in a SI engine,” SAE Paper 922355.
Deschamps, B., Snyder, R., and Baritaud, T., 1994, “Effect of flow and gasoline stratification on combustion in a 4-valve SI engine,” SAE Paper 941993.
Deschamps,  B., and Baritaud,  T., 1997, “Visualisation of gasoline and exhaust gases distribution in a 4-valve SI engine; effects of stratification on combustion and pollutants,” Revue de l’Institut Français du Pétrole, 52, No. 6, pp. 651–667.
Depussay, E., Mounaïm-Rousselle, C., Burnel, S., Deschamps, B., and Ricordeau, V., 1998, “Comparative measurements of local iso-octane concentrations by planar laser induced fluorescence and catalytic hot wires probe in SI engine,” SAE Paper 98FL-567.
Jian-Bang,  L., Qi,  P., Chang-Sheng,  L., and Jie-Rong,  S., 1988, “Principles of flow field diagnostics by laser induced biacetyl phosphorescence,” Exp. Fluids, 6, pp. 505–513.
Okabe,  H., and Noyes,  W. A., 1957, “The relative intensities of fluorescence and phosphorescence in biacetyl vapor,” J. Am. Chem. Soc., 79, pp. 801–806.
Heicklen,  J., 1959, “The fluorescence and phosphorescence of biacetyl vapor and acetone vapor,” J. Am. Chem. Soc., 81, pp. 3863–3866.
Itoh,  F., Kyachakoff,  G., and Hanson,  R. K., 1985, “Flow visualization in low pressure chambers using laser-induced biacetyl phosphorescence,” J. Vac. Sci. Technol. B, 3, No. 6, pp. 1600–1603.
Cruyningen,  I., Lozano,  A., and Hanson,  R. K., 1990, “Quantitative imaging of concentration by planar laser-induced fluorescence,” Exp. Fluids, 10, pp. 41–49.
Lawrenz, W., Köhler, J., Meier, F., Stolz, W., Wirth, R., Bloss, W. H., Maly, R. R., Wagner, E., and Zahn, M., 1992, “Quantitative 2D LIF measurements of air/fuel ratios during the intake stroke in a transparent SI engine,” SAE Paper 922320.
Grossmann,  F., Monkhouse,  P. B., Ridder,  M., Sick,  V., and Wolfrum,  J., 1996, “Temperature and pressure dependences of the laser-induced fluorescence of gas-phase acetone and 3-pentanone,” Appl. Phys. B: Lasers and Optics, 62, pp. 249–253.
Yuen,  L. S., Peters,  J. E., and Lucht,  R. P., 1997, “Pressure dependence of laser-induced fluorescence from acetone,” Appl. Opt., 36, No. 15, pp. 3271–3277.
Bryant,  R. A., Donbar,  J. M., and Driscoll,  J. F., 2000, “Acetone laser induced fluorescence for low pressure/low temperature flow visualization,” Exp. Fluids, 28, pp. 471–476.
Sasayama, T., 1986, “An advanced computer controlled engine system employing new combustion monitoring sensors,” SAE Paper 865077.
Sado, G., and Sado, M. C., 1991, Les plans d’expériences: de l’expérimentation à l’assurance qualité, Afnor Technique.
Benoist, D., Tourbier, Y., and Germain-Tourbier, S., 1994, Plans d’expériences: construction et analyze, Technique & Documentation Lavoisier.
Box, G. E. P., and Draper, N. R., 1987, Empirical model building and response surfaces, Wiley, New York.
Einecke,  S., Schulz,  C., and Sick,  V., 2000, “Measurement of temperature, fuel concentration and equivalence ratio fields using tracer LIF in IC engine combustion,” Appl. Phys. B: Lasers and Optics, 71, pp. 717–723.

Figures

Grahic Jump Location
Optical system for the LIF signal measurement
Grahic Jump Location
Evolution of the LIF signal versus the laser power
Grahic Jump Location
Evolution of the LIF signal versus the flow velocity
Grahic Jump Location
Variation of the LIF signal versus the equivalence ratio at a pressure of 0.44 MPa and a temperature of 428 K
Grahic Jump Location
Variation of the LIF signal versus the pressure at various conditions of equivalence ratio and temperature
Grahic Jump Location
Variation of the LIF signal versus the temperature at a pressure of 0.3 MPa and an equivalence ratio of 0.80
Grahic Jump Location
Influence of the pressure, the equivalence ratio and the flow velocity on the LIF signal
Grahic Jump Location
Influence of the pressure, the equivalence ratio and the temperature on the LIF signal
Grahic Jump Location
Example of a heterogeneous centered plan with two factors (equivalence ratio and pressure)

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In