Wake Dynamics of a Yawed Cylinder

[+] Author and Article Information
J. S. Marshall

Department of Mechanical and Industrial Engineering and IIHR–Hydroscience and Engineering, University of Iowa, Iowa City, IA 52242e-mail: jeffrey-marshall@uiowa.edu

J. Fluids Eng 125(1), 97-103 (Jan 22, 2003) (7 pages) doi:10.1115/1.1523069 History: Received January 29, 2002; Revised August 08, 2002; Online January 22, 2003
Copyright © 2003 by ASME
Your Session has timed out. Please sign back in to continue.


King,  R., 1977, “Vortex Excited Oscillations of Yawed Circular Cylinders,” ASME J. Fluids Eng., 99, pp. 495–502.
Ramberg,  S., 1983, “The Effects of Yaw and Finite Length Upon the Vortex Wakes of Stationary and Vibrating Circular Cylinders,” J. Fluid Mech., 128, pp. 81–107.
Relf, E. F., and Powell, C. H., 1917, “Tests on Smooth and Stranded Wires Inclined to the Wind Direction and a Comparison of the Results on Stranded Wires in Air and Water,” British A.R.C. R+M Report 307.
Hanson,  A. R., 1966, “Vortex Shedding From Yawed Cylinders,” AIAA J., 4(4), pp. 738–740.
Van Atta,  C. W., 1968, “Experiments in Vortex Shedding From Yawed Circular Cylinders,” AIAA J., 6(5), pp. 931–933.
Bursnall, W. J., and Loftin, L. K., 1951, “Experimental Investigation of the Pressure Distribution About a Yawed Circular Cylinder in the Critical Reynolds Number Range,” NACA TN 2463.
Friehe,  C., and Schwarz,  W. H., 1960, “Deviations From the Cosine Law for Yawed Cylindrical Anemometer Sensors,” ASME J. Appl. Mech., 35, pp. 655–662.
Thomson,  K. D., and Morrison,  D. F., 1971, “The Spacing, Position and Strength of Vortices in the Wake of Slender Cylindrical Bodies at Large Incidence,” J. Fluid Mech., 50, pp. 751–783.
Lamont,  P. J., and Hunt,  B. L., 1976, “Pressure and Force Distributions on a Sharp-Nosed Circular Cylinder at Large Angles of Inclination to a Uniform Subsonic Stream,” J. Fluid Mech., 76, pp. 519–559.
Snarski, S. R., and Jordan, S. A., 2001, “Fluctuating Wall Pressure on a Circular Cylinder in Cross-Flow and the Effect of Angle of Incidence,” 2001 ASME Fluids Engineering Division Summer Meeting, New Orleans, LA, May 29–June 1.
Moore,  F. K., 1956, “Yawed Infinite Cylinders & Related Problems—Independence Principle Solutions,” Adv. Appl. Mech., 4, pp. 181–187.
Marshall,  J. S., Grant,  J. R., Gossler,  A. A., and Huyer,  S. A., 2000, “Vorticity Transport on a Lagrangian Tetrahedral Mesh,” J. Comput. Phys., 161, pp. 85–113.
Clarke,  N. R., and Tutty,  O. R., 1994, “Construction and Validation of a Discrete Vortex Method for the Two-Dimensional Incompressible Navier-Stokes Equations,” Comput. Fluids, 23(6), pp. 751–783.
Salmon,  J. K., and Warren,  M. S., 1994, “Skeletons From the Treecode Closet,” J. Comput. Phys., 111, pp. 136–155.
Marshall,  J. S., and Grant,  J. R., 1997, “A Lagrangian Vorticity Collocation Method for Viscous, Axisymmetic Flows With and Without Swirl,” J. Comput. Phys., 138, pp. 302–330.
Borouchaki,  H., and Lo,  S. H., 1995, “Fast Delauney Triangularization in Three Dimensions,” Comput. Methods Appl. Mech. Eng., 128, pp. 153–167.
Schlichting, H., 1979, Boundary-Layer Theory, McGraw-Hill, New York, p. 17.
Fleischmann,  S. T., and Sallet,  D. W., 1981, “Vortex Shedding From Cylinders and the Resulting Unsteady Forces and Flow Phenomenon. Part I,” Shock Vib. Dig., 13(10), pp. 9–22.
Burger,  J. M., 1948, “A Mathematical Model Illustrating the Theory of Turbulence,” Adv. Appl. Mech., 1, pp. 171–199.
Dhanak,  M. R., 1981, “The Stability of an Expanding Circular Vortex Layer,” Proc. R. Soc. London, Ser. A, 375, pp. 443–451.
Dritschel,  D. G., 1989, “On the Stabilization of a Two-Dimensional Vortex Strip by Adverse Shear,” J. Fluid Mech., 206, pp. 193–221.
Lessen,  M., Singh,  P. J., and Paillet,  F., 1974, “The Instability of a Trailing Line Vortex. Part 1. Inviscid Theory,” J. Fluid Mech., 63, pp. 753–763.
Mayer,  E. W., and Powell,  K. G., 1992, “Viscous and Inviscid Instabilities of a Trailing Vortex,” J. Fluid Mech., 245, pp. 91–114.
Khorrami,  M. R., 1991, “On the Viscous Modes of Instability of a Trailing Line Vortex,” J. Fluid Mech., 225, pp. 197–212.
Robinson,  A. C., and Saffman,  P. G., 1982, “Three-Dimensional Stability of Vortex Arrays,” J. Fluid Mech., 125, pp. 411–427.


Grahic Jump Location
Sketch showing the two modes of nearly parallel vortex shedding for flow past a yawed cylinder of finite length (based on flow visualizations of Ramberg 2)
Grahic Jump Location
Mesh used for discretization of the vorticity field near the cylinder
Grahic Jump Location
Time-variation of drag and lift coefficients for (a) Re=300 and (b) Re=100. Reference drag coefficients compiled by Schlichting 17 are indicated by dashed lines.
Grahic Jump Location
Contours of (a) axial vorticity, (b) cross-stream vorticity magnitude ωCx2y2, and (c) axial velocity in the cylinder wake for Re=300 at time t=21. In (a), regions are shaded black for ωz<−1.2 and gray for ωz>1.2. In (b), contours are drawn for ωc=0.25 and 0.50, and gray shading indicates ωC>0.50. In (c), contours are drawn for w=0.225, 0.45, 0.675, and 0.9, and gray shading indicates w<0.9.
Grahic Jump Location
Near-field of the cylinder wake showing (a) cross-stream vorticity magnitude and (b) axial velocity at two different times during the wake oscillation cycle. In (a), contours are shown for ωC=1 and 2, and gray shading indicates regions with ωC>1. In (b), contours are shown for w=0.1, 0.3, 0.5, 0.7, and 0.9, and gray shading indicates regions with w<0.7.
Grahic Jump Location
Vortex lines of the cross-stream vorticity field for a case with t=10, corresponding to the first plot in Fig. 5(a)
Grahic Jump Location
Variation of axial force coefficient with time for cases with Re=100 (solid curve) and Re=300 (dashed curve)
Grahic Jump Location
Variation of cross-stream vorticity magnitude on the cylinder surface as a function of azimuthal angle for Re=100 (solid curve) and Re=300 (dashed curve)



Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In