Calculation of Wear Rate

[+] Author and Article Information
I. V. Kraghelsky

Research Institute of Mechanical Engineering, Academy of Sciences of the USSR, Moscow, USSR

J. Basic Eng 87(3), 785-790 (Sep 01, 1965) (6 pages) doi:10.1115/1.3650690 History: Received August 10, 1964; Online November 03, 2011


This paper contains exhaustive analytical data on factors contributing to wear. The wear of a deformed body interacting with an absolutely rigid rough solid is considered. It is believed that wear results from the deformation of a body due to geometrical and mechanical factors and due to the adhesion bonds thereof. Three types of wear are considered: By elastic deformation, by plastic deformation, and by microcutting. The suggested criteria allow us to determine conditions which cause these types of wear to appear. It is shown that the rate of wear, i.e., the ratio of height of the worn layer to the distance of sliding at elastic contact depends on the elasticity modulus, roughness, friction coefficient, nominal pressure, rupture stress of material, and on the power exponent of fatigue curve; at plastic contact it depends on roughness, nominal pressure, hardness, destroying deformation, and friction coefficient; at microcutting—on roughness, nominal pressure, and hardness; wear at microcutting is independent of friction coefficient. The formulas deduced are borne out by experiments. These formulas may be readily modified for the case of two rough surfaces.

Copyright © 1965 by ASME
Your Session has timed out. Please sign back in to continue.





Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In