Impact Strength of Austenitic Stainless-Steel Welds at −320 F—Effects of Composition, Ferrite Content, and Heat-Treatment

[+] Author and Article Information
F. W. Bennett, C. P. Dillon

Union Carbide Corporation, Chemicals Division, Research and Development Department, South Charleston, W. Va.

J. Basic Eng 88(1), 33-36 (Mar 01, 1966) (4 pages) doi:10.1115/1.3645837 History: Received July 06, 1965; Online November 03, 2011


A statistical evaluation has been made of the effect of weld rod composition, ferrite content, and heat-treatment upon the impact strength of certain austenitic stainless-steel welds in 304 stainless-steel plate at −320 F. The data indicate that suitable and approximately equivalent properties are obtained with 310 stainless-steel rod in the as-welded condition, type 308 stainless-steel rod in the as-welded condition (ferrite less than 6 percent), and 308L stainless-steel rod either as-welded or stress-relieved at 1750 F (ferrite less than 9 percent). The impact resistance of 310 stainless steel is adversely affected by stress relief, apparently due to carbide precipitation in this alloy. The 308 and 308L stainless-steel rods are both adversely affected by a stress relief at 1550 F, indicative of sigma formation. The carbon content in 308 stainless-steel rods apparently is not a major factor, as indicated by the lack of adverse effects with a 1750 F stress relief, from which the rate of cooling through the sensitizing range of 800 to 1500 F is identical with that in the 1500 F stress relief. The basic practical conclusion to be drawn from these data is that regular carbon 304 stainless steel welded with 308L stainless-steel rod can be used in cryogenic applications, and that the decision as to whether to stress relieve or not may be left to the mechanical engineer, subject only to the stipulation of a minimum stress-relieving temperature of 1750 F.

Copyright © 1966 by ASME
Your Session has timed out. Please sign back in to continue.





Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In