0
RESEARCH PAPERS

Parametric Influence on the Wall-Thickness Changes and the Bulk Strain Behavior of Hollow-Drawn Tubing

[+] Author and Article Information
J. E. Flinn

Department of Metallurgy, Washington State University, Pullman, Wash.

J. Basic Eng 91(4), 792-809 (Dec 01, 1969) (18 pages) doi:10.1115/1.3571223 History: Received June 30, 1969; Online November 03, 2011

Abstract

The hollow-drawing behavior of tubing with γ0 values (ratio of initial wall thickness to outer radius) between 0 < γ0 < 1 was studied. The effect of various parameters on wall-thickness changes during hollow drawing through conical shaped dies was examined. The parameters which influenced the wall thickness changes were die-angle, alloy or metal, and γ0 . The reduction per pass or magnitude of draft had only a slight or negligible effect. An examination of the wall-thickness changes in terms of current theories is made. The bulk true strain behavior of hollow-drawn tubing is also evaluated for several metals. These strains are the elongation, hoop, and thickness, and they are examined between the limits of a rod and an infinitely thin-wall tube. These limits and the constancy of volume principle suggest that the strains can be represented by ε = C In r/r0 , where C is a coefficient peculiar to each strain.

Copyright © 1969 by ASME
Your Session has timed out. Please sign back in to continue.

References

Figures

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In