Research Papers: Flows in Complex Systems

Numerical Investigation of Back Vane Design and Its Impact on Pump Performance

[+] Author and Article Information
Farzam Mortazavi

Department of Mechanical Engineering,
Texas A&M University,
College Station, TX 77843-3123
e-mail: farzam.mortazavi@tamu.edu

Alireza Riasi

Department of Mechanical Engineering,
University of Tehran,
Tehran 11155-4563, Iran
e-mail: ariasi@ut.ac.ir

Ahmad Nourbakhsh

Hydraulic Machinery Research Institute,
University of Tehran,
Tehran 11155-4563, Iran
e-mail: anour@ut.ac.ir

Contributed by the Fluids Engineering Division of ASME for publication in the JOURNAL OF FLUIDS ENGINEERING. Manuscript received March 29, 2017; final manuscript received July 2, 2017; published online September 1, 2017. Assoc. Editor: Ioannis K. Nikolos.

J. Fluids Eng 139(12), 121104 (Sep 01, 2017) (9 pages) Paper No: FE-17-1196; doi: 10.1115/1.4037281 History: Received March 29, 2017; Revised July 02, 2017

Adding back vanes to the rear shroud of centrifugal pumps is sometimes practiced in order to alleviate large axial forces. Effective design and flow characteristics of back vanes remain obscure due to lack of knowledge associated with experimental complexities in study of this area. In this study, various design parameters of the conventional noncurved rectangular back vanes are evaluated using computational fluid dynamics (CFD). Furthermore, the complex flow structure at the rear chamber of these pumps is illustrated and discussed with the advantage of CFD which is a highly costly and taxing job if one chooses to capture it using experimental methods. Effect of back vanes outer radius, width, clearance, thickness, vane angle, and number of vanes on pump characteristics and axial thrust has been investigated. New findings of this study show that back vanes are capable of canceling the axial thrust in a large range of flow rates without a penalty to the machine efficiency, provided that suitable design parameters are selected. In addition, the best efficiency point (BEP) will not be affected by usage of back vanes. The rear chamber’s flow pattern suggest that back vanes have a repumping effect causing increased pump head at longer back vane configurations.

Copyright © 2017 by ASME
Your Session has timed out. Please sign back in to continue.


Nourbakhsh, A. , Jaumotte, A. , Hirsch, C. , and Parizi, H. B. , 2007, Turbopumps and Pumping Systems, Springer-Verlag, Berlin. [CrossRef]
Gantar, M. , Florjancic, D. , and Sirok, B. , 2002, “ Hydraulic Axial Thrust in Multistage Pumps—Origins and Solutions,” ASME J. Fluids Eng., 124(2), pp. 336–341. [CrossRef]
Salvadori, S. , Marini, A. , and Martelli, F. , 2012, “ Methodology for the Residual Axial Thrust Evaluation in Multistage Centrifugal Pumps,” Eng. Appl. Comput. Fluid Mech., 6(2), pp. 271–284.
Massey, I. , 1985, “ Subsynchronous Vibration Problems in High-Speed Multistage Centrifugal Pumps,” 14th Turbomachinery Symposium, Houston, TX, pp. 11–16. http://turbolab.tamu.edu/proc/turboproc/T14/T1411-16.pdf
Shimura, T. , Kawasaki, S. , Uchiumi, M. , Kimura, T. , and Matsui, J. , 2012, “ Internal Flow and Axial Thrust Balancing of a Rocket Pump,” ASME J. Fluids Eng., 134(4), p. 041103. [CrossRef]
Saha, S. L. , Kurokawa, J. , Matsui, J. , and Imamura, H. , 2000, “ Suppression of Performance Curve Instability of a Mixed Flow Pump by Use of J-Groove,” ASME J. Fluids Eng., 122(3), pp. 592–597. [CrossRef]
Lobanoff, V. S. , and Ross, R. R. , 2013, Centrifugal Pumps: Design and Application, 2nd ed., Gulf Professional Publishing, Houston, TX.
Zhou, L. , Shi, W. , Li, W. , and Agarwal, R. , 2013, “ Numerical and Experimental Study of Axial Force and Hydraulic Performance in a Deep-Well Centrifugal Pump With Different Impeller Rear Shroud Radius,” ASME J. Fluids Eng., 135(10), p. 104501. [CrossRef]
Stepanoff, A. J. , 1957, Centrifugal and Axial Flow Pumps Theory Design and Application, 2nd ed., Wiley, New York.
Bross, S. , and Addie, G. , 2002, “ Prediction of Impeller Nose Wear Behaviour in Centrifugal Slurry Pumps,” Exp. Therm. Fluid Sci., 26(6), pp. 841–849. [CrossRef]
Guinzburg, A. , and Buse, F. , 1995, “ Magnetic Bearings as an Impeller Force Measurement Technique,” 12th International Pump Users Symposium, Houston, TX, Mar. 14–16, pp. 69–76. http://turbolab.tamu.edu/proc/pumpproc/P12/P1269-76.pdf
Ohara, Y. , Murase, M. , and Nose, Y. , 1997, “ Hemolytic Effect of the Secondary Vane Incorporated Into the Back Side of the Impeller,” Artif. Organs, 21(7), pp. 694–699. [CrossRef] [PubMed]
Wilk, A. , 2009, “ Laboratory Investigations and Theoretical Analysis of Axial Thrust Problem in High Rotational Speed Pumps,” WSEAS Trans. Fluid Mech., 4(1), pp. 1–13. http://www.wseas.us/e-library/transactions/fluid/2009/28-372.pdf
Godbole, V. , Patil, R. , and Gavade, S. , 2012, “ Axial Thrust in Centrifugal Pumps–Experimental Analysis,” 15th International Conference on Experimental Mechanics (ICEM), Porto, Portugal, July 22–27, pp. 22–27. http://www.hds.bme.hu/~fhegedus/VibrationMonitoring/Ali%20Parhizkar/Refrences/Understanding%20Topic/2977.pdf
Cao, L. , Wang, Z. , Luo, Y. , and Liu, M. , 2013, “ Numerical Analysis of the Flow Field in the Pump Chamber of a Centrifugal Pump With Back Blades,” IOP Conf. Ser.: Mater. Sci. Eng., 52, p. 032004.
Cheng, X. , Li, R. , Gao, Y. , and Guo, W. , 2013, “ Numerical Research on the Effects of Impeller Pump-Out Vanes on Axial Force in a Solid-Liquid Screw Centrifugal Pump,” IOP Conf. Ser.: Mater. Sci. Eng., 52, p. 062008.
Hong, F. , Yuan, J. , Heng, Y. , Fu, Y. , Zhou, B. , and Zong, W. , 2013, “ Numerical Optimal Design of Impeller Back Pump-Out Vanes on Axial Thrust in Centrifugal Pumps,” ASME Paper No. FEDSM2013-16598.
Gülich, J. F. , 2008, Centrifugal Pumps, 2nd ed., Springer-Verlag, Berlin.
ANSYS, 2016, “ ANSYS CFX-Solver Theory Guide,” ANSYS, Inc., Canonsburg, PA.
Rhie, C. M. , and Chow, W. L. , 1983, “ Numerical Study of the Turbulent Flow Past an Airfoil With Trailing Edge Separation,” AIAA J., 21(11), pp. 1525–1532. [CrossRef]
Menter, F. , Kuntz, M. , and Langtry, R. , 2003, “ Ten Years of Industrial Experience With the SST Turbulence Model,” Turbul., Heat Mass Transfer, 4(1), pp. 625–632. http://citeseerx.ist.psu.edu/viewdoc/download?doi=
Smirnov, P. E. , and Menter, F. R. , 2009, “ Sensitization of the SST Turbulence Model to Rotation and Curvature by Applying the Spalart-Shur Correction Term,” ASME J. Turbomach., 131(4), p. 041010. [CrossRef]
Schobeiri, M. T. , and Nikparto, A. , 2014, “ A Comparative Numerical Study of Aerodynamics and Heat Transfer on Transitional Flow Around a Highly Loaded Turbine Blade With Flow Separation Using RANS, URANS and LES,” ASME Paper No. GT2014-25828.
Balasubramanian, R. , Barrows, S. , and Chen, J. P. , 2008, “ Investigation of Shear-Stress Transport Turbulence Model for Turbomachinery Applications,” Paper No. AIAA 2008-655.
Bourgeois, J. A. , Martinuzzi, R. J. , Savory, E. , Zhang, C. , and Roberts, D. A. , 2010, “ Assessment of Turbulence Model Predictions for an Aero-Engine Centrifugal Compressor,” ASME J. Turbomach., 133(1), p. 011025. [CrossRef]
Gao, Z. , Zhu, W. , Lu, L. , Deng, J. , Zhang, J. , and Wuang, F. , 2014, “ Numerical and Experimental Study of Unsteady Flow in a Large Centrifugal Pump With Stay Vanes,” ASME J. Fluids Eng., 136(7), p. 071101. [CrossRef]
Moore, J. J. , and Palazzolo, A. B. , 1999, “ CFD Comparison to 3D Laser Anemometer and Rotordynamic Force Measurements for Grooved Liquid Annular Seals,” ASME J. Tribol., 121(2), pp. 306–314. [CrossRef]
Mortazavi, F. , and Palazzolo, A. B. , 2017, “ CFD-Based Prediction of Rotordynamic Performance of Smooth Stator-Grooved Rotor (SS-GR) Liquid Annular Seals,” ASME Paper No. GT2017-63380.
Celik, I. B. , Ghia, U. , Roache, P. J. , Freitas, C. J. , and Coleman, H. , 2008, “ Procedure for Estimation and Reporting of Uncertainty Due to Discretization in CFD Applications,” ASME J. Fluids Eng., 130(7), p. 078001. [CrossRef]
Seong, S.-M. , and Kang, S.-H. , 2006, “ Numerical Study on the Variation of Axial Thrust of Rotating Disc With Pump-Out Vane,” Trans. Korean Soc. Mech. Eng. B, 30(3), pp. 230–237. [CrossRef]
Will, B. C. , Benra, F. K. , and Dohmen, H. J. , 2012, “ Investigation of the Flow in the Impeller Side Clearances of a Centrifugal Pump With Volute Casing,” J. Therm. Sci., 21(3), pp. 197–208. [CrossRef]
Daily, J. W. , and Nece, R. E. , 1960, “ Chamber Dimension Effects on Induced Flow and Frictional Resistance of Enclosed Rotating Disks,” ASME J. Basic Eng. Ser. D, 82(1), pp. 217–232. [CrossRef]
Wilk, A. , and Wilk, S. , 1996, “ Testing of the Effect Which Relieving Radial Blades Have on Power Loss and Pressure Distribution,” Pump Congress (PUMPENTAGUNG), Karlsruhe, Germany, Sept. 30–Oct. 2, p. 4.
Nardone, R. , and Flitney, B. , 2006, “ The Effect of Impeller Back Pump-Out Vanes on Seal Performance,” Sealing Technol., 2006(2), pp. 9–11. [CrossRef]
Li, W. , 2013, “ Model of Flow in the Side Chambers of an Industrial Centrifugal Pump for Delivering Viscous Oil,” ASME J. Fluids Eng., 135(5), p. 051201. [CrossRef]


Grahic Jump Location
Fig. 7

Grid independency results

Grahic Jump Location
Fig. 3

Grid density for various grid cell sizes. The selected grid of 5.2 × 106 cells has 20 layers of mesh across the clearance.

Grahic Jump Location
Fig. 2

Back vane design parameters

Grahic Jump Location
Fig. 14

Impeller and pump head variation with and without back vanes

Grahic Jump Location
Fig. 8

Comparison of streamlines and velocity vectors at the sample planes z¯=0.05 and θ=0 for the selected grid and the finest grid

Grahic Jump Location
Fig. 9

Pressure distribution and streamlines in the rotating frame sampled at three axial planes

Grahic Jump Location
Fig. 5

y+ values contoured for the primary and rear passages

Grahic Jump Location
Fig. 4

Computational domains and the structured grid

Grahic Jump Location
Fig. 10

Velocity field at sample radial planes

Grahic Jump Location
Fig. 11

Swirl ratio distribution inside rear chamber sampled at three axial planes

Grahic Jump Location
Fig. 12

Circumferentially averaged swirl ratio profiles at various radial positions

Grahic Jump Location
Fig. 13

Circumferentially averaged radial velocity profiles at various radial positions

Grahic Jump Location
Fig. 1

Axial thrust canceled by back vanes

Grahic Jump Location
Fig. 18

Disk power loss efficiency with and without back vanes

Grahic Jump Location
Fig. 19

Swirl ratio (volume averaged) variation with and without back vanes

Grahic Jump Location
Fig. 20

Design parameters effect on axial thrust

Grahic Jump Location
Fig. 15

Axial thrust variation with and without back vanes

Grahic Jump Location
Fig. 16

Pump efficiency variation with and without back vanes

Grahic Jump Location
Fig. 17

Power consumption with and without back vanes

Grahic Jump Location
Fig. 21

Design parameters effect on the pump head

Grahic Jump Location
Fig. 22

Design parameter effect on the pump efficiency

Grahic Jump Location
Fig. 23

Number of vanes effect on the pump efficiency, head, and axial thrust



Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In