... of nonproductive time. Finite element analysis (FEA) can be used to capture the nonlinear interactions between the threads and between the seal faces of the pin and box subjected to a tightening torque and service loads such as axial and bending loads. To expedite and standardize such a simulation process...

...-fidelity 3D finite element analysis (FEA) model that can capture the contact interaction between the outside collar and internal chassis of the tool and between the tool and wellbore is developed to predict the lateral motion of the drilling tool in the presence of backward whirl. A roll test system (i.e...

... (SAC) polyurethane (PU) foam perforated panel finite element analysis (FEA) Proceedings of the ASME 2022 International Mechanical Engineering Congress and Exposition IMECE2022 October 30-November 3, 2022, Columbus, Ohio IMECE2022-96880 EFFECT OF AIR GAP, THICKNESS OF POLYURETHANE (PU) FOAM...

... and disadvantages of applying FEA models. bolt hot forging finite element analysis (FEA) Proceedings of the ASME 2022 International Mechanical Engineering Congress and Exposition IMECE2022 October 30-November 3, 2022, Columbus, Ohio IMECE2022-96919 OPTIMIZATION OF DESIGN PARAMETERS FOR LARGE DIAMETER...

... of advanced rotary shouldered connections. In this study, a numerical model based on three-dimensional finite element analysis (FEA) of the threads is developed for numerically qualifying the seal integrity of the connection. Specifically, the FEA model can describe the nonlinear interactions between the pin...

... truss element, the size of the finite element model can be scaled up or down for macro or micro scale modeling without changing the material properties or modeling method being used. finite element analysis (FEA) fibers polymer-matrix composites layered composites embedded elements multi...

... the workholding accuracy and reliability. KEYWORDS: Fixture design. Finite Element Analysis (FEA), Dimension and Tolerance. INTRODUCTION In the manufacturing planning stage, for a given process plan, there are several principle factors that would influence the quality of final products: (1) Workpart (i.e...

... results from the two approaches to approximating the body force terms are largely similar except at high Gr *. Additionally, a maximum heat transfer enhancement by buoyancy of ≈ 310% was found. mixed convection COMSOL multiphysics ® finite element analysis (FEA) Boussinesq approximation...

... by an optimized thread form and stress relief groove, and an advanced manufacturing process. Nonlinear finite element analysis (FEA) was extensively utilized to predict the fatigue resistance of the threaded connection with makeup torque and service stroke loads, and to explore and optimize the designs...

... and process parameters on recoil and warp are also investigated. Hemming Finite Element Analysis (FEA) recoil surface warp A STUDY ON FUNDAMENTAL MECHANISMS OF WARP AND RECOIL IN HEMMING Ellen Zhang, Xin Wu and S. Jack H u The University of Michigan Ann Arbor, Ml 48109 ABSTRACT panel in both pre...

... finite element analysis (FEA) MODELING TRANSIENT HEAT TRANSFER AND DRY-OUT PHENOMENA IN HEAT PIPES USING FINITE ELEMENT ANALYSIS Mustafa Özçatalba 1, Ramazan Aykut Sezmen1 1Roketsan INC., Ankara, TURKEY ABSTRACT Heat pipes are passive two-phase heat transfer devices that used in various heat transport...

... (diffusional) tetragonal-to-monoclinic phase transformation at 900°C in the top coat. The result obtained from the Phase Field Model was sequentially coupled with Finite Element Method, and the resulting stress field in the top coat was predicted. Phase Field Model (PFM) Finite Element Analysis (FEA...

... of measurements. Impact analysis finite element analysis (FEA) measurements strain gauges 1 Copyright © 2012 by ASME DYNAMIC ANALYSIS OF LARGE SPECIALTY GLASS PANELS UNDER BALL DROP IMPACT NUMERICAL MODELING AND MEASUREMENTS Satish C Chaparala Senior Research Scientist Corning Incorporated Corning...

... 02 08 2012 This paper presents a unique approach for integrating a finite element analysis (FEA) model using a dynamic explicit of Abaqus with a nonlinear process of the mold’s open/close phase in an injection molding machine. This opening/closing phase is considered to have one...

... tire model finite element analysis (FEA) PAM-SHOCK in-plane tire parameter damping constant stiffness durability test Proceedings of IMECE 04 2004 ASME International Mechanical Engineering Congress and Exposition E 2404 Lehigh Pkwy. South o l t p 405 08 Göteborg 405 08 Göteborg Proceedings...

.... A comparison was made between the finite element predictions and the experimental data, and the agreement is good. Textile composites Stress/strain curves Failure criterion Finite element analysis (FEA) Acoustic emission August 30, 2004 20:17 S reinforced laminates subjected to uniaxial tension...