A continuum model is developed for describing deformation and failure mechanisms in crystalline solids (ceramics and minerals) with the cubic spinel structure. The constitutive model describes the response under conditions pertinent to impact loading: high pressures, high strain rates, and, possibly, high temperatures. Nonlinear elasticity, anisotropy, thermoelastic coupling, dislocation glide, twinning, shear-induced fracture, and pressure-induced pore collapse are addressed. The model is applied to enable an improved understanding of transparent ceramic aluminum oxynitride (AlON). Calculations demonstrate an accurate depiction of hydrostatic and shear stresses observed experimentally in shock-loaded polycrystalline AlON. Various choices of initial resistances to slip, twinning, or shear fracture that result in similar predictions for average stresses in polycrystals but different predictions for defect densities (accumulated dislocations and twin volume fractions) are investigated. Predictions for single crystals provide insight into grain orientation effects not available from previous experimental investigations.
Skip Nav Destination
e-mail: jclayton@arl.army.mil
Article navigation
January 2011
Research Papers
A Nonlinear Thermomechanical Model of Spinel Ceramics Applied to Aluminum Oxynitride (AlON)
J. D. Clayton
J. D. Clayton
Mem. ASME
Impact Physics,
e-mail: jclayton@arl.army.mil
US Army Research Laboratory
, Aberdeen Proving Ground, MD 21005-5066
Search for other works by this author on:
J. D. Clayton
Mem. ASME
Impact Physics,
US Army Research Laboratory
, Aberdeen Proving Ground, MD 21005-5066e-mail: jclayton@arl.army.mil
J. Appl. Mech. Jan 2011, 78(1): 011013 (11 pages)
Published Online: October 20, 2010
Article history
Received:
December 10, 2009
Revised:
August 17, 2010
Posted:
August 24, 2010
Published:
October 20, 2010
Online:
October 20, 2010
Citation
Clayton, J. D. (October 20, 2010). "A Nonlinear Thermomechanical Model of Spinel Ceramics Applied to Aluminum Oxynitride (AlON)." ASME. J. Appl. Mech. January 2011; 78(1): 011013. https://doi.org/10.1115/1.4002434
Download citation file:
Get Email Alerts
Sound Mitigation by Metamaterials With Low-Transmission Flat Band
J. Appl. Mech (January 2025)
Deformation-Dependent Effective Vascular Permeability of a Biological Tissue Containing Parallel Microvessels
J. Appl. Mech (January 2025)
Mechanics of a Tunable Bistable Metamaterial With Shape Memory Polymer
J. Appl. Mech (January 2025)
Related Articles
Deformation Modes in Stainless Steel During Laser Shock Peening
J. Manuf. Sci. Eng (October,2009)
Deformation Behavior of Magnesium Extrusions With Strong Basal Texture: Experiments and Modeling
J. Appl. Mech (November,2013)
TEHD Behavior of Non-Newtonian Dynamically Loaded Journal Bearings in Mixed Lubrication for Direct Problem
J. Tribol (January,2002)
Editorial
J. Eng. Mater. Technol (January,2002)
Related Chapters
The Relation between Cold-Work-Induced Microstructural Evolution and the Postannealing Grain Structures in Zircaloy-4
Zirconium in the Nuclear Industry: 20th International Symposium
Characterization of Ultra-High Temperature and Polymorphic Ceramics
Advanced Multifunctional Lightweight Aerostructures: Design, Development, and Implementation
Introduction and Definitions
Handbook on Stiffness & Damping in Mechanical Design