Skip Nav Destination
Issues
June 2008
ISSN 0148-0731
EISSN 1528-8951
In this Issue
Research Papers
Robust Design for Acetabular Cup Stability Accounting for Patient and Surgical Variability
J Biomech Eng. June 2008, 130(3): 031001.
doi: https://doi.org/10.1115/1.2907764
Topics:
Bone
,
Design
,
Stability
,
Surgery
,
Weight (Mass)
Dynamic Motion Planning of 3D Human Locomotion Using Gradient-Based Optimization
Hyung Joo Kim, Qian Wang, Salam Rahmatalla, Colby C. Swan, Jasbir S. Arora, Karim Abdel-Malek, Jose G. Assouline
J Biomech Eng. June 2008, 130(3): 031002.
doi: https://doi.org/10.1115/1.2898730
Topics:
Collisions (Physics)
,
Degrees of freedom
,
Dynamics (Mechanics)
,
Equilibrium (Physics)
,
Modeling
,
Optimization
,
Path planning
,
Yaw
,
Robotics
,
Design
The Influence of Test Conditions on Characterization of the Mechanical Properties of Brain Tissue
J Biomech Eng. June 2008, 130(3): 031003.
doi: https://doi.org/10.1115/1.2907746
Topics:
Anisotropy
,
Biological tissues
,
Brain
,
Mechanical properties
,
Shear (Mechanics)
,
Temperature
,
Testing
,
Compression
,
Shear deformation
A Visco-Hyperelastic-Damage Constitutive Model for the Analysis of the Biomechanical Response of the Periodontal Ligament
Arturo N. Natali, Emanuele L. Carniel, Piero G. Pavan, Franz G. Sander, Christina Dorow, Martin Geiger
J Biomech Eng. June 2008, 130(3): 031004.
doi: https://doi.org/10.1115/1.2900415
Topics:
Biological tissues
,
Constitutive equations
,
Damage
,
Biomechanics
,
Soft tissues
,
Stiffness
,
Stress
,
Fibers
The Viscoelastic Standard Nonlinear Solid Model: Predicting the Response of the Lumbar Intervertebral Disk to Low-Frequency Vibrations
J Biomech Eng. June 2008, 130(3): 031005.
doi: https://doi.org/10.1115/1.2904464
Topics:
Deformation
,
Elastic moduli
,
Intervertebral discs
,
Relaxation (Physics)
,
Stress
,
Vibration
,
Solid models
,
Creep
,
Stiffness
A Cartilage Growth Mixture Model With Collagen Remodeling: Validation Protocols
Stephen M. Klisch, Anna Asanbaeva, Sevan R. Oungoulian, Koichi Masuda, Eugene J.-MA. Thonar, Andrew Davol, Robert L. Sah
J Biomech Eng. June 2008, 130(3): 031006.
doi: https://doi.org/10.1115/1.2907754
Topics:
Biological tissues
,
Cartilage
,
Stress
,
Constitutive equations
,
Tensors
,
Density
,
Biomechanics
Modeling the Mechanics of Tethers Pulled From the Cochlear Outer Hair Cell Membrane
Kristopher R. Schumacher, Aleksander S. Popel, Bahman Anvari, William E. Brownell, Alexander A. Spector
J Biomech Eng. June 2008, 130(3): 031007.
doi: https://doi.org/10.1115/1.2907758
Topics:
Adhesion
,
Cell membranes
,
Columns (Structural)
,
Deflection
,
Membranes
,
Shapes
Injury Tolerance and Moment Response of the Knee Joint to Combined Valgus Bending and Shear Loading
Dipan Bose, Kavi S. Bhalla, Costin D. Untaroiu, B. Johan Ivarsson, Jeff R. Crandall, Shepard Hurwitz
J Biomech Eng. June 2008, 130(3): 031008.
doi: https://doi.org/10.1115/1.2907767
Topics:
Knee
,
Shear (Mechanics)
,
Wounds
,
Failure
,
Displacement
Analysis and Interpretation of Stress Fiber Organization in Cells Subject to Cyclic Stretch
J Biomech Eng. June 2008, 130(3): 031009.
doi: https://doi.org/10.1115/1.2907745
Temperature Distribution During ICG-Dye-Enhanced Laser Photocoagulation of Feeder Vessels in Treatment of AMD-Related Choroidal Neovascularization
J Biomech Eng. June 2008, 130(3): 031010.
doi: https://doi.org/10.1115/1.2898832
Topics:
Absorption
,
Biological tissues
,
Damage
,
Lasers
,
Temperature
,
Vessels
,
Temperature distribution
Simulation of Turbulent Airflow Using a CT Based Upper Airway Model of a Racehorse
J Biomech Eng. June 2008, 130(3): 031011.
doi: https://doi.org/10.1115/1.2913338
Topics:
Air flow
,
Flow (Dynamics)
,
Pressure
,
Trachea
,
Turbulence
,
Computerized tomography
,
Boundary-value problems
,
Geometry
,
Respiratory cycle
,
Anatomy
Lumped Parameter Thermal Model for the Study of Vascular Reactivity in the Fingertip
J Biomech Eng. June 2008, 130(3): 031012.
doi: https://doi.org/10.1115/1.2913233
Topics:
Blood
,
Temperature
,
Blood flow
,
Skin
Numerical Analysis of the Cooling Effect of Blood Over Inflamed Atherosclerotic Plaque
J Biomech Eng. June 2008, 130(3): 031013.
doi: https://doi.org/10.1115/1.2913236
Topics:
Blood flow
,
Cooling
,
Temperature
,
Flow (Dynamics)
,
Atherosclerosis
,
Blood
,
Cycles
,
Vessels
,
Geometry
,
Wall temperature
Validation of an EMG-Driven, Graphically Based Isometric Musculoskeletal Model of the Cervical Spine
J Biomech Eng. June 2008, 130(3): 031014.
doi: https://doi.org/10.1115/1.2913234
Topics:
Cervical spine
,
Electromyography
,
Magnetic resonance imaging
,
Muscle
,
Musculoskeletal system
,
Torque
,
Dynamometers
,
Modeling
A Computational Procedure for Prediction of Structural Effects of Edge-to-Edge Repair on Mitral Valve
J Biomech Eng. June 2008, 130(3): 031015.
doi: https://doi.org/10.1115/1.2913235
Topics:
Stress
,
Valves
,
Pressure gradient
Experimental Validation of a Finite Element Model of a Human Cadaveric Tibia
J Biomech Eng. June 2008, 130(3): 031016.
doi: https://doi.org/10.1115/1.2913335
Topics:
Bone
,
Finite element model
,
Stress
,
Finite element analysis
,
Errors
A Structural Model of the Venous Wall Considering Elastin Anisotropy
J Biomech Eng. June 2008, 130(3): 031017.
doi: https://doi.org/10.1115/1.2907749
Topics:
Anisotropy
,
Pressure
,
Stress
,
Biomechanics
,
Fibers
Numerical Simulation of Mass Transport in a Microchannel Bioreactor With Cell Micropatterning
J Biomech Eng. June 2008, 130(3): 031018.
doi: https://doi.org/10.1115/1.2913231
Topics:
Absorption
,
Bioreactors
,
Mass transfer
,
Microchannels
Pulsatile Flow and Oxygen Transport Past Cylindrical Fiber Arrays for an Artificial Lung: Computational and Experimental Studies
J Biomech Eng. June 2008, 130(3): 031019.
doi: https://doi.org/10.1115/1.2907752
Topics:
Artificial lungs
,
Fibers
,
Flow (Dynamics)
,
Oxygen
,
Pulsatile flow
,
Fluids
,
Pressure drop
,
Cylinders
,
Computer simulation
Respiratory System Model for Quasistatic Pulmonary Pressure-Volume Curve: Inflation-Deflation Loop Analyses
J Biomech Eng. June 2008, 130(3): 031020.
doi: https://doi.org/10.1115/1.2913343
Topics:
Pressure
,
Respiratory system
,
Wounds
,
Lung
,
Pistons
,
Error functions
,
Gaussian distribution
Technical Briefs
3D Reconstruction and Manufacture of Real Abdominal Aortic Aneurysms: From CT Scan to Silicone Model
J Biomech Eng. June 2008, 130(3): 034501.
doi: https://doi.org/10.1115/1.2907765
Topics:
Aneurysms
,
Computerized tomography
,
Silicones
,
Wall thickness
,
Injection molding
,
Stress
,
Silicone rubber
Design Innovation
Design of an Ex Vivo Culture System to Investigate the Effects of Shear Stress on Cardiovascular Tissue
Philippe Sucosky, Muralidhar Padala, Adnan Elhammali, Kartik Balachandran, Hanjoong Jo, Ajit P. Yoganathan
J Biomech Eng. June 2008, 130(3): 035001.
doi: https://doi.org/10.1115/1.2907753
Email alerts
RSS Feeds
Simulating the Growth of TATA-Box Binding Protein-Associated Factor 15 Inclusions in Neuron Soma
J Biomech Eng (December 2024)
Evaluation of an Inverse Method for Quantifying Spatially Variable Mechanics
J Biomech Eng (December 2024)
Effect of Structure and Wearing Modes on the Protective Performance of Industrial Safety Helmet
J Biomech Eng (December 2024)
Sex-Based Differences and Asymmetry in Hip Kinematics During Unilateral Extension From Deep Hip Flexion
J Biomech Eng (December 2024)