... damage to the healthy lumen wall. We investigated noncontact IRE using a wet electrode approach for tumor ablation in a human esophagus with finite element models for electric field distribution, joule heating, thermal flux, and metabolic heat generation. Simulation results indicated the feasibility...

...% increase 8 weeks post-LMMS compared to SHAM. Damping, tan delta, and loss stiffness significantly increased by 17.6%, 16.3%, and 16.6%, respectively, at 8 weeks LMMS compared to SHAM. Finite element models of applied LMMS signal showed decreased stress in the mid-diaphyseal region at both 8-week LMMS and 8...

.... While addressing this aspect, a finite element model of a hip joint bearing consisting of zirconia-toughened alumina femoral head and ultrahigh molecular weight polyethylene liner was developed to predict the dynamic wear response of the liner. The Archard–Lancaster equation, consisting of surface...

... during blast and progresses toward a model able to predict potential hearing loss after blast. e-mail:  marcus.brown@ou.edu e-mail:  john.j.bradshaw-1@ou.edu e-mail:  rgan@ou.edu 20 04 2021 22 07 2021 13 09 2021 finite element model spiral cochlea ear blast...

... 15 08 2020 30 12 2020 04 03 2021 traumatic brain injury Sprague-Dawley rat shock tube advanced blast simulator finite element model brain pressure maximum principal strain The inability to directly assess the effects of human exposure to blast waves has led...

...-mail:  julio.cordioli@lva.ufsc.br 22 08 2019 28 02 2020 13 05 2020 multibody dynamics middle ear finite element model model reduction model correlation The human middle ear (ME) is an important part of the peripheral auditory system that ensures the effective transmission...

...-mail:  zgp_06@126.com e-mail:  Xuhf0516@163.com e-mail:  wangfei821016@126.com 26 02 2019 07 01 2020 08 04 2020 pelvis ligaments sacroiliac joint different positions finite element model The pelvis is composed of the sacrum, coccyx, hip bone, ligaments, and so...

... temporal bones under normal and postblast conditions. An increase of the TM displacement after blast exposure was observed in the posterior region of the TM in four temporal bone samples at the frequencies between 3 and 4 kHz. A finite element model of human TM with multilayer microstructure and orthogonal...

... in pain-inducing deformations of the capsular ligaments and neural structures. 26 09 2018 19 04 2019 cervical spine whiplash finite element model vertebral morphology gender-dependent mesh morphing Whiplash injuries of the neck are a common type of injury in low-speed...

.... Editor: Jonathan Vande Geest. 20 01 2014 15 12 2014 sclera glaucoma collagen fiber finite element model digital image correlation inverse finite element analysis wide angle X-ray scattering The sclera, which constitutes more than 80% of the eye-wall, is the white outer...

... with larger cancellous defects. finite element model subject specific cementless acetabular component pelvic bone osteolysis Periprosthetic osteolysis is a known complication following THA. This is most commonly caused by polyethylene (PE) wear particles which cause cellular activation...

... in preventing delamination at the interface. An idealized finite element model of the medial compartment of the knee was created, including a circular defect and an osteochondral implant. Damage and failure of fibrin at the interface was represented by a cohesive zone model with coefficients determined from...

... relations surface tension surfactants lung surfactant smooth muscle connective tissue geometric hysteresis acinar kinematic irreversibility finite element model micromechanics The airflow patterns of low Reynolds number acinar gas flow and the fate of inhaled particles suspended...

... with the wrist joint intact. Fracture loads established using the isolated radius method are consistently 1.5 to 3 times greater than those for the intact wrist method. To address this discrepancy, a validated finite element modeling procedure was used to predict distal radius fracture strength for 22 female...

...Taly P. Appelman; Joseph Mizrahi; Dror Seliktar Mechanically induced cell deformations have been shown to influence chondrocyte response in 3D culture. However, the relationship between the mechanical stimulation and cell response is not yet fully understood. In this study a finite element model...

... of the initial impact. Finite element models (FEMs) of bullet, armor, and gelatin and clay targets were developed with material parameters selected to best fit model calculations to the test measurements. FEMs of bullet and armor interactions were then assembled with a FEM of a human torso and FEMs of clay...

... properties on the load carried by healthy (Thompson grade I) and degenerated (Thompson grades III and IV) disks. A three-dimensional parametric poroelastic finite element model of the L4/L5 motion segment was developed. Grade I, grade II, and grade IV disks were modeled by altering the biomechanical...

... and possibly death. The mechanical environment present in AAA is currently thought to be important in disease initiation, progression, and diagnosis. In this study, we utilize porohyperelastic (PHE) finite element models (FEMs) to investigate how such modeling can be used to better understand the local...

... in the evaluation process, validated computational models can augment these experiments and efficiently evaluate perturbations of the design or surgical variables. The objective of the present study was to perform an initial kinematic verification of a dynamic finite element model of the Kansas knee simulator...

... developing gyri (outward folds). Contrary to previous speculation, however, axonal tension is not directed across developing gyri, suggesting that axon tension does not drive folding. On the other hand, using computational (finite element) models, we show that differential cortical growth accompanied...