A low-order control algorithm is developed to regulate an infinitely dimensional flexible beam subject to nondecaying, harmonic disturbances of known frequency. The control input is applied at the boundary while the output of concern is at the opposite end of the flexible structure. Only local displacement and velocity at the boundary are required in the control algorithm, which emulates the behavior of a set of mechanical spring, mass, and damper. A virtual spring is integrated with the structure flexibility to establish an internal model for the external disturbance. Such a virtual passive algorithm ensures stability in the presence of structural and parameter uncertainties. It is shown that, by properly choosing the control gains, the output tends to a standstill while the other parts of the system oscillate in such a way as to counteract the harmonic disturbance.
Skip Nav Destination
Article navigation
March 2004
Technical Briefs
Remote Vibration Control for Flexible Beams Subject to Harmonic Disturbances
Shang-Teh Wu
Shang-Teh Wu
Department of Mechanical Engineering, National Yunlin University of Science & Technology, Touliu, Yunlin 640, Taiwan
Search for other works by this author on:
Shang-Teh Wu
Department of Mechanical Engineering, National Yunlin University of Science & Technology, Touliu, Yunlin 640, Taiwan
Contributed by the Dynamic Systems, Measurement, and Control Division of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF DYNAMIC SYSTEMS, MEASUREMENT, AND CONTROL. Manuscript received by the ASME Dynamic Systems and Control Division May 16, 2002; final revision, August 12, 2003. Associate Editor: C. D. Rahn.
J. Dyn. Sys., Meas., Control. Mar 2004, 126(1): 198-201 (4 pages)
Published Online: April 12, 2004
Article history
Received:
May 16, 2002
Revised:
August 12, 2003
Online:
April 12, 2004
Citation
Wu , S. (April 12, 2004). "Remote Vibration Control for Flexible Beams Subject to Harmonic Disturbances ." ASME. J. Dyn. Sys., Meas., Control. March 2004; 126(1): 198–201. https://doi.org/10.1115/1.1650381
Download citation file:
Get Email Alerts
Cited By
Data-Driven Tracking Control of a Cushion Robot With Safe Autonomous Motion Considering Human-Machine Interaction Environment
J. Dyn. Sys., Meas., Control (July 2025)
Dynamic Obstacle Avoidance Strategy for High-Speed Vehicles Via Constrained Model Predictive Control and Improved Artificial Potential Field
J. Dyn. Sys., Meas., Control (July 2025)
An Adaptive Sliding-Mode Observer-Based Fuzzy PI Control Method for Temperature Control of Laser Soldering Process
J. Dyn. Sys., Meas., Control
Related Articles
Self-Sensing Active Magnetic Dampers for Vibration Control
J. Dyn. Sys., Meas., Control (November,2009)
Free Response and Absolute Vibration Suppression of Second-Order Flexible Structures—The Traveling Wave Approach
J. Vib. Acoust (June,2010)
Closed-Loop Input Shaping for Flexible Structures Using Time-Delay Control
J. Dyn. Sys., Meas., Control (September,2000)
Probabilistic Control for Uncertain Systems
J. Dyn. Sys., Meas., Control (March,2012)
Related Proceedings Papers
Related Chapters
Fault-Tolerant Control of Sensors and Actuators Applied to Wind Energy Systems
Electrical and Mechanical Fault Diagnosis in Wind Energy Conversion Systems
Smart Semi-Active Control of Floor-Isolated Structures
Intelligent Engineering Systems Through Artificial Neural Networks, Volume 17
Intelligent Vibration Control of Structures against Earthquakes Using Hybrid Damper
International Conference on Mechanical and Electrical Technology 2009 (ICMET 2009)