This paper reports a new 3D isothermal, steady state electrochemical modeling study for tubular solid oxide fuel cells where the testing setup is studied in order to improve fuel distribution and geometry. For the model validation, an experimental voltage-current density curve measured in house was used. This study focuses on the cell testing setup and is used to optimize the testing geometry for improved testing conditions. The mathematical model consists of coupling fluid dynamics, electrical conduction, and diffusion physics. The model indicates that flow mal-distribution may be of concern and may affect cell performance. In addition, concentrations of current densities throughout the solid oxide fuel cell may cause some hot spots. Finally, the model is able to predict the cell voltage-current density of the cell very well when compared to experimental data.
Modeling Studies of Tubular SOFCs for Transportation Markets
Mechanical Engineering Department,
Contributed by the Advanced Energy Systems Division of ASME for publication in the Journal of Fuel Cell Science and Technology. Manuscript received January 7, 2013; final manuscript received January 16, 2013; published online March 26, 2013. Editor: Nigel M. Sammes.
- Views Icon Views
- Share Icon Share
- Search Site
DiGiuseppe, G., Honnagondanahalli, N. K., Taylor, O., and Dederer, J. (March 26, 2013). "Modeling Studies of Tubular SOFCs for Transportation Markets." ASME. J. Fuel Cell Sci. Technol. April 2013; 10(2): 021009. https://doi.org/10.1115/1.4023844
Download citation file:
- Ris (Zotero)
- Reference Manager