This paper presents an overview of the main advances in solid oxide fuel cells (SOFCs) research and development (R&D), measurement standardization, and quality assurance in SOFC testing at the Forschungszentrum Jülich. These activities have resulted in both a significant improvement of the electrochemical performance and a better understanding of the electrochemical behavior of SOFCs. Research and development of SOFCs was mainly focused on two types of anode-supported cells, namely, those employing either La0.65Sr0.3MnO3 (LSM) or La0.58Sr0.4Co0.2Fe0.8O3δ (LSCF) cathode materials. In both cases the optimization of processing and microstructural parameters resulted in satisfactory power output and long-term stability at reduced operation temperatures. Standardization and quality assurance in SOFC testing was also addressed with the goal of producing consistent and reliable tests and measurement results. At present, under optimized experimental conditions, SOFCs with LSM or LSCF cathodes can deliver a power output of about 1.0W/cm2 and 1.9W/cm2 at 800°C (700 mV), respectively.

1.
Buchkremer
,
H. P.
,
Dieckmann
,
U.
, and
Stöver
,
D.
, 1996, “
Component Manufacturing and Stack Integration of Anode-Supported Planar SOFC System
,”
Proceedings of the Second European Solid Oxide Fuel Cell Forum
, Oslo, Norway, May 6–10,
B.
Thorstensen
, ed.,
European SOFC Forum
, Oberrohrdorf, Switzerland, pp.
221
228
.
2.
de Haart
,
L. G. J.
,
Hauber
,
Th.
,
Mayer
,
K.
, and
Stimming
,
U.
, 1996, “
Electrochemical Performance of an Anode Supported Planar SOFC System
,”
Proceedings of the Second European Solid Oxide Fuel Cell Forum
, Oslo, Norway, May 6–10,
B.
Thorstensen
, ed.,
European SOFC Forum
, Oberrohrdorf, Switzerland, pp.
229
235
.
3.
de Haart
,
L. G. J.
,
Mayer
,
K.
,
Stimming
,
U.
, and
Vinke
,
I. C.
, 1998, “
Operation of Anode-Supported Thin Electrolyte Film Solid Oxide Fuel Cells at 800°C
and Below,”
J. Power Sources
0378-7753,
71
, pp.
302
305
.
4.
Wilkenhöner
,
R.
,
Mallener
,
W.
,
Buchkremer
,
H. P.
,
Hauber
,
Th.
, and
Stimming
,
U.
, 1996, “
Cathode Processing by Wet Powder Spraying
,”
Proceedings of the Second European Solid Oxide Fuel Cell Forum
, Oslo, Norway, May 6–10,
B.
Thorstensen
, ed.,
European SOFC Forum
, Oberrohrdorf, Switzerland, pp.
279
288
.
5.
Haanappel
,
V. A. C.
,
Mertens
,
J.
,
Rutenbeck
,
D.
,
Tropartz
,
C.
,
Herzhof
,
W.
,
Sebold
,
D.
, and
Tietz
,
F.
, 2005, “
Optimisation of Processing and Microstructural Parameters of LSM Cathodes to Improve the Electrochemical Performance of Anode-Supported SOFCs
,”
J. Power Sources
0378-7753,
141
, pp.
216
226
.
6.
Haanappel
,
V. A. C.
,
Mertens
,
J.
, and
Mai
,
A.
, 2006, “
Performance Improvement of (La,Sr)MnO3
and (La,Sr)(Co,Fe)O3-Type Anode-Supported SOFCs,”
ASME J. Fuel Cell Sci. Technol.
1550-624X,
3
, pp.
263
270
.
7.
Mai
,
A.
,
Haanappel
,
V. A. C.
,
Uhlenbruck
,
S.
,
Tietz
,
F.
, and
Stöver
,
D.
, 2005, “
Ferrite-Based Perovskites as Cathode Materials for Anode-Supported Solid Oxide Fuel Cells. Part I: Variation of Composition
,”
Solid State Ionics
0167-2738,
176
, pp.
1341
1350
.
8.
Mai
,
A.
,
Haanappel
,
V. A. C.
,
Tietz
,
F.
, and
Stöver
,
D.
, 2006, “
Ferrite-Based Perovskites as Cathode Materials for Anode-Supported Solid Oxide Fuel Cells. Part II: Influence of the CGO Interlayer
,”
Solid State Ionics
0167-2738,
177
, pp.
2103
2107
.
9.
Haanappel
,
V. A. C.
,
Rutenbeck
,
D.
,
Mai
,
A.
,
Uhlenbruck
,
S.
,
Sebold
,
D.
,
Wesemeyer
,
H.
,
Röwekamp
,
B.
,
Tropartz
,
C.
, and
Tietz
,
F.
, 2004, “
The Influence of Noble-Metal-Containing Cathodes on the Electrochemical Performance of Anode-Supported SOFCs
,”
J. Power Sources
0378-7753,
130
, pp.
119
128
.
10.
Haanappel
,
V. A. C.
,
Mai
,
A.
, and
Uhlenbruck
,
S.
, 2009, “
Characterization of Anode-Supported SOFCs with PSCF Cathode
,”
ASME J. Fuel Cell Sci. Technol.
1550-624X,
6
, p.
011007
.
11.
Vassen
,
R.
,
Hathiramani
,
D.
,
Mertens
,
J.
,
Haanappel
,
V. A. C.
, and
Vinke
,
I. C.
, 2007, “
Manufacturing of High Performance Solid Oxide Fuel Cells (SOFCs) With Atmospheric Plasma Spraying (APS)
,”
Surf. Coat. Technol.
,
202
(
3
), pp.
499
508
. 0257-8972
12.
Haanappel
,
V. A. C.
,
Mertens
,
J.
, and
Malzbender
,
J.
, 2007, “
Characterisation of Ni-Cermets SOFCs With Varying Anode Densities
,”
J. Power Sources
,
171
, pp.
789
792
. 0378-7753
13.
Fontaine
,
M. L.
,
Laberty-Robert
,
C.
,
Ansart
,
F.
, and
Tailhades
,
P.
, 2006, “
Composition and Porosity Graded La2−xNiO4+δ
(x≥0) Interlayers for SOFC: Control of the Microstructure via a Sol-Gel Process,”
J. Power Sources
,
156
, pp.
33
38
. 0378-7753
14.
Boehm
,
E.
,
Bassat
,
J. M.
,
Dordor
,
P.
,
Mauvy
,
F.
,
Grenier
,
J. C.
, and
Stevens
,
Ph.
, 2005, “
Oxygen Diffusion and Transport Properties in Non-Stoichiometric Ln2−xNiO4+δ
Oxides,”
Solid State Ionics
,
176
, pp.
2717
2725
. 0167-2738
15.
Nie
,
H. W.
,
Wen
,
T. L.
,
Wang
,
S. R.
,
Wang
,
Y. S.
,
Guth
,
U.
, and
Vashook
,
V.
, 2006, “
Preparation, Thermal Expansion, Chemical Compatibility, Electrical Conductivity and Polarization of A2−αAα′MO4
(A=Pr, Sm; A′=Sr; M=Mn, Ni; α=0.3, 0.6) as a New Cathode for SOFC,”
Solid State Ionics
0167-2738,
177
, pp.
1929
1932
.
16.
Lalanne
,
C.
,
Mauvy
,
F.
,
Bassat
,
J. M.
,
Grenier
,
J. C.
,
Dordor
,
P.
,
Pouchard
,
M.
, and
Stevens
,
P.
, 2004, “
Electrochemical Behaviour of Porous Nd2−xNiO4+δ
Electrodes,”
Proceedings of the Sixth European Solid Oxide Fuel Cells Forum
, Lucerne, Switzerland, June 28–July 2,
M.
Mogensen
, ed., pp.
1351
1359
.
17.
Haanappel
,
V. A. C.
, and
Smith
,
M. J.
, 2007, “
Quality Assurance and Solid Oxide Fuel Cell Testing at Forschungszentrum Jülich
,”
ASME J. Fuel Cell Sci. Technol.
1550-624X,
4
, pp.
194
202
.
18.
Haanappel
,
V. A. C.
, and
Smith
,
M. J.
, 2007, “
A Review of Standardising SOFC Measurement and Quality Assurance at FZJ
,”
J. Power Sources
,
171
, pp.
169
178
. 0378-7753
19.
Haanappel
,
V. A. C.
,
Mai
,
A.
, and
Mertens
,
J.
, 2006, “
Electrode Activation of Anode-Supported SOFCs With LSM- or LSCF-Type Cathodes
,”
Solid State Ionics
,
177
, pp.
2033
2037
. 0167-2738
You do not currently have access to this content.