In this work, a three-dimensional model of a solid oxide fuel cell (SOFC) stack is developed to predict the temperature distribution across the stack. The model simulates a particular SOFC stack comprising of five single cells. Isothermal and adiabatic walls are chosen as the different boundary conditions in order to simulate the real situation, which lies somewhere in between. In the situation where adiabatic walls are assumed, the result shows that heat convection dominates the heat transfer process. However, heat conduction plays a major role when the isothermal walls are assumed. It is found that the highest temperature found in the isothermal stack is 1135 K at an operating temperature of 1073 K. The temperature difference is significant with the hottest point located in the middle of the active area. In the adiabatic stack, the temperature is at its maximum of 1574 K near the outlets of fuel and air at the same operating temperature. It should be kept in mind that both situations will have effects on the temperature behavior of the stack in reality. The temperature and current distributions of stack models in this work are also plotted in three dimensions and the analyses of stack performances are given. By comparing the results of five-cell and ten-cell stack models, the temperature differences of the five-cell stack and the ten-cell stack are 62 and 109 K, respectively. This indicates that there is a drastic temperature change throughout the stack when the stack size is increased.
Skip Nav Destination
e-mail: r.botas@imperial.ac.uk
Article navigation
February 2010
This article was originally published in
Journal of Fuel Cell Science and Technology
Research Papers
A Study of Temperature Distribution Across a Solid Oxide Fuel Cell Stack
Kaokanya Sudaprasert,
Kaokanya Sudaprasert
Department of Mechanical Engineering,
Imperial College London
, South Kensington Campus, London SW7 2AZ, UK
Search for other works by this author on:
Rowland P. Travis,
Rowland P. Travis
Department of Mechanical Engineering,
Imperial College London
, South Kensington Campus, London SW7 2AZ, UK
Search for other works by this author on:
Ricardo F. Martinez-Botas
Ricardo F. Martinez-Botas
Department of Mechanical Engineering,
e-mail: r.botas@imperial.ac.uk
Imperial College London
, South Kensington Campus, London SW7 2AZ, UK
Search for other works by this author on:
Kaokanya Sudaprasert
Department of Mechanical Engineering,
Imperial College London
, South Kensington Campus, London SW7 2AZ, UK
Rowland P. Travis
Department of Mechanical Engineering,
Imperial College London
, South Kensington Campus, London SW7 2AZ, UK
Ricardo F. Martinez-Botas
Department of Mechanical Engineering,
Imperial College London
, South Kensington Campus, London SW7 2AZ, UKe-mail: r.botas@imperial.ac.uk
J. Fuel Cell Sci. Technol. Feb 2010, 7(1): 011002 (13 pages)
Published Online: October 5, 2009
Article history
Received:
March 28, 2006
Revised:
August 23, 2008
Published:
October 5, 2009
Citation
Sudaprasert, K., Travis, R. P., and Martinez-Botas, R. F. (October 5, 2009). "A Study of Temperature Distribution Across a Solid Oxide Fuel Cell Stack." ASME. J. Fuel Cell Sci. Technol. February 2010; 7(1): 011002. https://doi.org/10.1115/1.3080810
Download citation file:
Get Email Alerts
Cited By
Optimization of Thermal Non-Uniformity Challenges in Liquid-Cooled Lithium-Ion Battery Packs Using NSGA-II
J. Electrochem. En. Conv. Stor (November 2025)
In Situ Synthesis of Nano PtRuW/WC Hydrogen Evolution Reaction Catalyst for Acid Hydrogen Evolution by a Microwave Method
J. Electrochem. En. Conv. Stor (November 2025)
Intelligently Constructing Polyaniline/Nickel Hydroxide Core–Shell Nanoflowers as Anode for Flexible Electrode-Enhanced Lithium-/Sodium-Ion Batteries
J. Electrochem. En. Conv. Stor (November 2025)
State of Health Estimation Method for Lithium-Ion Batteries Based on Multifeature Fusion and BO-BiGRU Model
J. Electrochem. En. Conv. Stor (November 2025)
Related Articles
Thermofluid-Dynamic Analysis of Circular-Planar Type Intermediate-Temperature Solid Oxide Fuel Cells
J. Fuel Cell Sci. Technol (February,2009)
Electrical and Thermal Performance of a Solid Oxide Fuel Cell Unit With Nonuniform Inlet Flow and High Fuel Utilization
J. Fuel Cell Sci. Technol (June,2011)
A Thermal Model for Concentric-Tube Overfire Air Ports
J. Thermal Sci. Eng. Appl (March,2009)
Implementing Thermal Management Modeling Into SOFC System Level Design
J. Fuel Cell Sci. Technol (April,2011)
Related Proceedings Papers
Related Chapters
Experimental Investigation of an Improved Thermal Response Test Equipment for Ground Source Heat Pump Systems
Inaugural US-EU-China Thermophysics Conference-Renewable Energy 2009 (UECTC 2009 Proceedings)
Energy Balance for a Swimming Pool
Electromagnetic Waves and Heat Transfer: Sensitivites to Governing Variables in Everyday Life
When Is a Heat Sink Not a Heat Sink?
Hot Air Rises and Heat Sinks: Everything You Know about Cooling Electronics Is Wrong