Phenolic and amine epoxy systems are widely used as hardeners in underfill materials for flip chip packaging. A comparison was made between these two systems in order to evaluate the reliability performance of a flip chip plastic ball grid array (FC-PBGA). The coefficient of thermal expansion, glass transition temperature (), Young’s modulus (E), and fracture toughness were revealed by using a thermal mechanical analyzer, a dynamic mechanical analyzer, and a single-edge notch three-point bending test, while moisture absorption study was performed using an /85% relative humidity chamber. The adhesion strength with different conditions of temperature and humidity was performed using a die shear test. The series of standard reliability tests such as accelerated temperature cycle test, pressure cooker test, thermal humidity storage test, and high temperature storage test were executed upon the FC-PBGA, which was filled by phenolic and amine epoxy systems of underfill materials. It was found that the adhesion strength of phenolic-based underfills is better than that of amine-based underfills in almost all test conditions. Phenolic-based underfills also demonstrated better reliability compared with amine-based underfills.
Skip Nav Destination
e-mail: azmanjalar@gmail.com
Article navigation
December 2010
Research Papers
Comparative Study of Phenolic-Based and Amine-Based Underfill Materials in Flip Chip Plastic Ball Grid Array Package
Z. Kornain,
Z. Kornain
Microelectronics Packaging and Materials Laboratory (MIPAC), Institute of Microengineering and Nanoelectronics (IMEN),
Universiti Kebangsaan Malaysia (UKM)
, Bangi, Selangor 43600, Malaysia
Search for other works by this author on:
A. Jalar,
A. Jalar
Microelectronics Packaging and Materials Laboratory (MIPAC), Institute of Microengineering and Nanoelectronics (IMEN),
e-mail: azmanjalar@gmail.com
Universiti Kebangsaan Malaysia (UKM)
, Bangi, Selangor 43600, Malaysia
Search for other works by this author on:
R. Rasid,
R. Rasid
Microelectronics Packaging and Materials Laboratory (MIPAC), Institute of Microengineering and Nanoelectronics (IMEN),
Universiti Kebangsaan Malaysia (UKM)
, Bangi, Selangor 43600, Malaysia
Search for other works by this author on:
S. Abdullah
S. Abdullah
Microelectronics Packaging and Materials Laboratory (MIPAC), Institute of Microengineering and Nanoelectronics (IMEN),
Universiti Kebangsaan Malaysia (UKM)
, Bangi, Selangor 43600, Malaysia
Search for other works by this author on:
Z. Kornain
Microelectronics Packaging and Materials Laboratory (MIPAC), Institute of Microengineering and Nanoelectronics (IMEN),
Universiti Kebangsaan Malaysia (UKM)
, Bangi, Selangor 43600, Malaysia
A. Jalar
Microelectronics Packaging and Materials Laboratory (MIPAC), Institute of Microengineering and Nanoelectronics (IMEN),
Universiti Kebangsaan Malaysia (UKM)
, Bangi, Selangor 43600, Malaysiae-mail: azmanjalar@gmail.com
R. Rasid
Microelectronics Packaging and Materials Laboratory (MIPAC), Institute of Microengineering and Nanoelectronics (IMEN),
Universiti Kebangsaan Malaysia (UKM)
, Bangi, Selangor 43600, Malaysia
S. Abdullah
Microelectronics Packaging and Materials Laboratory (MIPAC), Institute of Microengineering and Nanoelectronics (IMEN),
Universiti Kebangsaan Malaysia (UKM)
, Bangi, Selangor 43600, MalaysiaJ. Electron. Packag. Dec 2010, 132(4): 041012 (6 pages)
Published Online: December 8, 2010
Article history
Received:
August 6, 2009
Revised:
July 21, 2010
Online:
December 8, 2010
Published:
December 8, 2010
Citation
Kornain, Z., Jalar, A., Rasid, R., and Abdullah, S. (December 8, 2010). "Comparative Study of Phenolic-Based and Amine-Based Underfill Materials in Flip Chip Plastic Ball Grid Array Package." ASME. J. Electron. Packag. December 2010; 132(4): 041012. https://doi.org/10.1115/1.4002741
Download citation file:
Get Email Alerts
Cited By
Enhancing Mechanical Reliability of Silver-Sintered Joints With Copper Nanowires in High-Power Electronic Devices
J. Electron. Packag (December 2024)
Special Issue on InterPACK2023
J. Electron. Packag (December 2024)
Impact of Encapsulated Phase Change Material Additives for Improved Thermal Performance of Silicone Gel Insulation
J. Electron. Packag (December 2024)
Related Articles
Comparative Studies on Solder Joint Reliability of Plastic and Ceramic Ball Grid Array Packages of the Same Form Factor Under Power and Accelerated Thermal Cycling
J. Electron. Packag (December,2008)
Interactions Between Flip Chip Underfill and Solder Alloy
J. Electron. Packag (September,2010)
Shorter Field Life in Power Cycling for Organic Packages
J. Electron. Packag (March,2007)
Reliability Analysis of Flip Chip Designs Via Computer Simulation
J. Electron. Packag (September,2000)
Related Proceedings Papers
Related Chapters
Reliability-Based Inspection Intervals of Offshore Jacket Fleets
Ageing and Life Extension of Offshore Facilities
Evaluation of Adhesive and Absorption Properties for Absorbable Tissue Adhesives
Synthetic Bioabsorbable Polymers for Implants
Mechanisms Controlling the Initial Stiffness of Frozen Sand
Mechanical Properties of Frozen Soil