Prediction of fracture dimensions during propagation of a hydraulically induced fracture for well stimulation is essential for the design of a stimulation treatment. During the past decade much effort has been spent on the development of a suitable theory for this purpose. Since neither the length nor the width of a hydraulically induced fracture can be measured in situ during a field treatment, this is primarily a mental exercise in applied mechanics. The main measurable quantities that are directly related to the fracture propagation process are the total volume of fracturing fluid injected into the reservoir and the time required to accomplish this. Not surprizingly, various authors have arrived at different theories, depending on the assumed conditions prevailing downhole. In this paper, the assumptions underlying the various theories currently in use for the prediction of fracture dimensions, viz., those of Perkins and Kern, of Nordgren, of Geertsma and De Klerk and of Daneshy, are compared. Rather than take issue for one particular theory, which appeared impossible because none of the theories is perfect, the paper shows what the various theories have in common, where and why they differ from each other and what the practical consequences are in case of application to treatment design.
Skip Nav Destination
Article navigation
March 1979
Research Papers
A Comparison of the Theories for Predicting Width and Extent of Vertical Hydraulically Induced Fractures
J. Geertsma,
J. Geertsma
Koninklijke/Shell Exploratie en Produktie Laboratorium, Rijswijk, The Netherlands
Search for other works by this author on:
R. Haafkens
R. Haafkens
Koninklijke/Shell Exploratie en Produktie Laboratorium, Rijswijk, The Netherlands
Search for other works by this author on:
J. Geertsma
Koninklijke/Shell Exploratie en Produktie Laboratorium, Rijswijk, The Netherlands
R. Haafkens
Koninklijke/Shell Exploratie en Produktie Laboratorium, Rijswijk, The Netherlands
J. Energy Resour. Technol. Mar 1979, 101(1): 8-19 (12 pages)
Published Online: March 1, 1979
Article history
Received:
November 20, 1978
Online:
August 19, 2010
Citation
Geertsma, J., and Haafkens, R. (March 1, 1979). "A Comparison of the Theories for Predicting Width and Extent of Vertical Hydraulically Induced Fractures." ASME. J. Energy Resour. Technol. March 1979; 101(1): 8–19. https://doi.org/10.1115/1.3446866
Download citation file:
Get Email Alerts
Fuel Consumption Prediction in Dual-Fuel Low-Speed Marine Engines With Low-Pressure Gas Injection
J. Energy Resour. Technol (December 2024)
A Semi-Analytical Rate-Transient Analysis Model for Fractured Horizontal Well in Tight Reservoirs Under Multiphase Flow Conditions
J. Energy Resour. Technol (November 2024)
Experimental Investigation of New Combustion Chamber Geometry Modification on Engine Performance, Emission, and Cylinder Liner Microstructure for a Diesel Engine
J. Energy Resour. Technol (December 2024)
Downdraft Gasification for Biogas Production: The Role of Artificial Intelligence
J. Energy Resour. Technol (December 2024)
Related Articles
Boundary Element Methods in Dynamic Analysis: Part II (1986-1996)
Appl. Mech. Rev (March,1997)
Optimizing Hydraulic Fracture to Manage Sand Production by Predicting Critical Drawdown Pressure in Gas Well
J. Energy Resour. Technol (March,2012)
A Semi-Analytical Rate-Transient Analysis Model for Fractured Horizontal Well in Tight Reservoirs Under Multiphase Flow Conditions
J. Energy Resour. Technol (November,2024)
Multiphase Flow in Highly Fractured Shale Gas Reservoirs: Review of Fundamental Concepts for Numerical Simulation
J. Energy Resour. Technol (October,2020)
Related Proceedings Papers
Related Chapters
Introduction and Definitions
Handbook on Stiffness & Damping in Mechanical Design
Introduction I: Role of Engineering Science
Fundamentals of heat Engines: Reciprocating and Gas Turbine Internal Combustion Engines
Simple Structural Elements
Introduction to Plastics Engineering