A two-dimensional transient Eulerian model integrating the kinetic theory for emulsion phase is used to simulate the bubbling and slugging gas-solid fluidized beds, including the Geldart B and D particles, respectively. CFD results show that utilizing an algebraic granular temperature equation, instead of a full granular temperature, one leads to a significant reduction in computational time without loosing accuracy. Different drag models have been examined in the current study. CFD results show that the Syamlal–O’Brien and Di Felice adjusted drag models, based on minimum fluidization velocity, are not suitable for the bed, including coarse particles (Geldart group B). The Gidaspow drag model displays better results in comparison with the others. A good agreement with the available experimental data and the researcher’s findings has been reached quantitatively and qualitatively. The proposed model can reasonably be used for simulation of slugging fluidized beds. This study reduces the computational error compared with the previous works.
Issue Section:
Multiphase Flows
1.
Kunii
, D.
, and Levenspiel
, O.
, 1991, Fluidization Engineering
, 2nd ed., Butterworths
, London
.2.
Versteeg
, H. K.
, and Malalsekera
, W.
, 1995, An Introduction to Computational Fluid Dynamics: The Finite Volume Method
, Longmans
, London
.3.
Hosseini
, S. H.
, Rahimi
, R.
, Zivdar
, M.
, and Samimi
, A.
, 2009, “The Effect of Ring Baffles on Hydrodynamics of a Gas-Solid Bubbling Fluidized Bed by Using Computational Fluid Dynamics
,” Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci.
0954-4062, 223
, pp. 2281
–2289
.4.
Oberkampf
, W. L.
, and Trucano
, T. G.
, 2002, “Verification and validation in computational fluid dynamics
,” Prog. Aerosp. Sci.
0376-0421, 38
(3
), pp. 209
–272
.5.
Grace
, J. R.
, and Taghipour
, F.
, 2004, “Verification and Validation of CFD Models and Dynamic Similarity for Fluidized Beds
,” Powder Technol.
0032-5910, 139
, pp. 99
–110
.6.
Rietema
, K.
, and Mutsers
, S. M. P.
, 1973, “The Effect of Inter-Particle Forces on the Expansions of a Homogeneous Gas-Fluidized Bed
,” Proceedings of the International Symposium on Fluidization
, Toulouse, pp. 28
.7.
Patil
, D. J.
, van Sint Annaland
, M.
, and Kuipers
, J. A. M.
, 2005, “Critical Comparison of Hydrodynamic Models for Gas-Solid Fluidized Beds—Part I: Bubbling Gas-Solid Fluidized Beds Operated With a Jet
,” Chem. Eng. Sci.
0009-2509, 60
, pp. 57
–72
.8.
Patil
, D. J.
, van Sint Annaland
, M.
, and Kuipers
, J. A. M.
, 2005, “Critical Comparison of Hydrodynamic Models for Gas-Solid Fluidized Beds—Part II: Freely Bubbling Gas-Solid Fluidized Beds
,” Chem. Eng. Sci.
0009-2509, 60
, pp. 73
–84
.9.
Pain
, C. C.
, Mansoorzadeh
, S.
, and de Oliveira
, C. R. E.
, 2001, “A Study of Bubbling and Slugging Fluidised Beds Using the Two-Fluid Granular Temperature Model
,” Int. J. Multiphase Flow
0301-9322, 27
, pp. 527
–551
.10.
van Wachem
, B. G. M.
, Schouten
, J. C.
, Krishna
, R.
, and van den Bleek
, C. M.
, 1998, “Eulerian Simulations of Bubbling Behaviour in Gas-Solid Fluidised Beds
,” Comput. Chem. Eng.
0098-1354, 22
, pp. S299
–S306
.11.
Ding
, J.
, and Gidaspow
, D.
, 1990, “A Bubbling Fluidization Model Using Kinetic Theory of Granular Flow
,” AIChE J.
0001-1541, 36
, pp. 523
–538
.12.
Ding
, J. M.
, and Lyczkowski
, R. W.
, 1992, “Three-Dimensional Kinetic-Theory Modeling of Hydrodynamics and Erosion in Fluidized-Beds
,” Powder Technol.
0032-5910, 73
, pp. 127
–138
.13.
Enwald
, H.
, and Almstedt
, A. E.
, 1999, “Fluid Dynamics of a Pressurized Fluidized Bed: Comparison Between Numerical Solutions From Two-Fluid Models and Experimental Results
,” Chem. Eng. Sci.
0009-2509, 54
, pp. 329
–342
.14.
van Wachem
, B. G. M.
, Schouten
, J. C.
, Krishna
, R.
, van den Bleek
, C. M.
, and Sinclair
, J. L.
, 2001, “Comparative Analysis of CFD Models of Dense Gas-Solid Systems
,” AIChE J.
0001-1541, 47
(5
), pp. 1035
–1051
.15.
Huilin
, L.
, Yurong
, H.
, Wentie
, L.
, Jianmin
, D.
, Gidaspow
, D.
, and Bouillard
, J.
, 2004, “Computer Simulations of Gas-Solid Flow in Spouted Beds Using Kinetic-Frictional Stress Model of Granular Flow
,” Chem. Eng. Sci.
0009-2509, 59
(4
), pp. 865
–878
.16.
Du
, W.
, Bao
, X. J.
, Xu
, J.
, and Wei
, W. S.
, 2006, “Computational Fluid Dynamics (CFD) Modeling of Spouted Bed: Influence of Frictional Stress, Maximum Packing Limit and Coefficient of Restitution of Particles
,” Chem. Eng. Sci.
0009-2509, 61
(14
), pp. 4558
–4570
.17.
Syamlal
, M.
, and O’Brien
, T.
, 1989, “Computer Simulation of Bubbles in a Fluidized Bed
,” AIChE Symp. Ser.
0065-8812, 85
, pp. 22
–31
.18.
Gidaspow
, D.
, 1994, Multiphase Flow and Fluidization: Continuum and Kinetic Theory Descriptions
, Academic
, San Diego
.19.
Wen
, C. -Y.
, and Yu
, Y. H.
, 1966, “Mechanics of Fluidization
,” Chem. Eng. Prog.
0360-7275, 62
(2
), pp. 100
–111
.20.
Hosseini
, S. H.
, Rahimi
, R.
, Zivdar
, M.
, and Samimi
, A.
, 2009, “CFD Simulation of Gas-Solid Bubbling Fluidized Bed Containing FCC Particles
,” Korean J. Chem. Eng.
0256-1115, 26
(5
), pp. 1405
–1413
.21.
Hosseini
, S. H.
, Zivdar
, M.
, Rahimi
, R.
, and Samimi
, A.
, 2009, “CFD Simulation of Solid Hold-Up in Gas-Solid Fluidized Bed at High Gas Velocities
,” Chemical Product and Process Modeling
, 4
(1
), Article 19, pp. 1
–24
.22.
McKeen
, T. R.
, and Pugsley
, T. S.
, 2003, “Simulation and Experimental Validation of a Freely Bubbling Bed of FCC Catalyst
,” Powder Technol.
0032-5910, 129
, pp. 139
–152
.23.
Taghipour
, F.
, Ellis
, N.
, and Wong
, C.
, 2005, “Experimental and Computational Study of Gas-Solid flUidized Bed Hydrodynamics
,” Chem. Eng. Sci.
0009-2509, 60
, pp. 6857
–6867
.24.
Behjat
, Y.
, Shahhosseini
, S.
, and Hashemabadi
, S. H.
, 2008, “CFD Modeling of Hydrodynamic and Heat Transfer in Fluidized Bed Reactors
,” Int. Commun. Heat Mass Transfer
0735-1933, 35
, pp. 357
–368
.25.
Ahuja
, G. N.
, and Patwardhan
, A. W.
, 2008, “CFD and Experimental Studies of Solids Hold-Up Distribution and Circulation Patterns in Gas-Solid Fluidized Beds
,” Chem. Eng. J.
0300-9467, 143
, pp. 147
–160
.26.
Syamlal
, M.
, Rogers
, W.
, and O’Brien
, T. J.
, 1993, MFIX Documentation: Theory Guide, Technical Paper No. DOE/METC-94/1004.27.
Boemer
, A.
, Qi
, H.
, Renz
, U.
, Vasquez
, S.
, and Boysan
, F.
, 1995, “Eulerian Computation of Fluidized Bed Hydrodynamics—A Comparison of Physical Model
,” Proceedings of the International Conference on FBC
, Orlando, FL, pp. 775
.28.
Esfahani
, M. N.
, Rahimi
, R.
, and Hosseini
, S. H.
, 2006, “Hydrodynamics of a Gas-Fluidized Bed by CFD
,” Proceedings of the 11th Iranian National Chemical Engineering Congress
, Tarbiat Modarres University, Tehran.29.
2006, FLUENT 6.3, User’s Guide, 23.5 Eulerian Model, Fluent Inc.
30.
Vejahat
, F.
, 2006, “CFD Simulation of Gas-Solid Bubbling Fluidized Bed
,” MS thesis, University of Regina, Canada.31.
Pain
, C. C.
, Mansoorzadeh
, S.
, de Oliveira
, C. R. E.
, and Goddard
, A. J. H.
, 2001, “Numerical Modelling of Gas-Solid Fluidized Beds Using the Two-Fluid Approach
,” Int. J. Numer. Methods Fluids
0271-2091, 36
, pp. 91
–124
.32.
Baeyens
, J.
, and Geldart
, D.
, 1974, “An Investigation Into Slugging Fluidized Beds
,” Chem. Eng. Sci.
0009-2509, 29
, pp. 255
–265
.33.
Laverman
, J. A.
, Roghair
, I.
, and van Sint Annaland
, M.
, 2008, “Investigation Into the Hydrodynamics of Gas-Solid Fluidized Beds Using Particle Image Velocimetry Coupled With Digital Image Analysis
,” Can. J. Chem. Eng.
0008-4034, 86
, pp. 523
–535
.34.
Lin
, J. S.
, Chen
, M. M.
, and Chao
, B. T.
, 1985, “A Novel Radioactive Particle Tracking Facility for Measurement of Solids Motion in Gas Fluidized Beds
,” AIChE J.
0001-1541, 31
, pp. 465
–473
.35.
Lettieri
, P.
, Cammarata
, L.
, Micale
, G. D. M.
, and Yates
, J.
, 2003, “CFD Simulations of Gas Fluidized Beds Using Alternative Eulerian-Eulerian Modelling Approaches
,” International Journal of Chemical Reactor Engineering
, 1
, Article A5, pp. 1
–19
.36.
Syamlal
, M.
, and O’Brien
, T. J.
, 2003, “Fluid Dynamic Simulation of O3 Decomposition in a Bubbling Fluidized Bed
,” AIChE J.
0001-1541, 49
(11
), pp. 2793
–2801
.37.
Zimmermann
, S.
, and Taghipour
, F.
, 2005, “CFD Modeling of the Hydrodynamics and Reaction Kinetics of FCC Fluidized-Bed Reactors
,” Ind. Eng. Chem. Res.
0888-5885, 44
, pp. 9818
–9827
.38.
Almuttahar
, A.
, and Taghipour
, F.
, 2008, “Computational Fluid Dynamics of High Density Circulating Fluidized Bed Riser: Study of Modeling Parameters
,” Powder Technol.
0032-5910, 185
, pp. 11
–23
.Copyright © 2010
by American Society of Mechanical Engineers
You do not currently have access to this content.
