Skip Nav Destination
Issues
September 1965
This article was originally published in
Journal of Basic Engineering
ISSN 0021-9223
In this Issue
Research Papers
Dynamically Loaded Journal Bearings: Mobility Method of Solution
J. Basic Eng. September 1965, 87(3): 537–546.
doi: https://doi.org/10.1115/1.3650602
Topics:
Bearings
,
Journal bearings
,
Mechanical admittance
The Static and Dynamic Characteristics of the Spiral-Grooved Thrust Bearing
J. Basic Eng. September 1965, 87(3): 547–555.
doi: https://doi.org/10.1115/1.3650603
Linearized PH Stability Theory for Finite Length, Self-Acting Gas-Lubricated, Plain Journal Bearings
J. Basic Eng. September 1965, 87(3): 559–567.
doi: https://doi.org/10.1115/1.3650606
Topics:
Journal bearings
,
Stability
,
Rotors
,
Whirls
Characteristics of Herringbone-Grooved, Gas-Lubricated Journal Bearings
J. Basic Eng. September 1965, 87(3): 568–576.
doi: https://doi.org/10.1115/1.3650607
Topics:
Journal bearings
,
Bearings
,
Whirls
,
Differential equations
,
Compressibility
,
Film thickness
,
Plain bearings
,
Pressure
On Hydrodynamic Instability of Gas-Lubricated Journal Bearings
J. Basic Eng. September 1965, 87(3): 579–587.
doi: https://doi.org/10.1115/1.3650611
Topics:
Hydrodynamic stability
,
Journal bearings
,
Bearings
,
Stability
,
Compressibility
,
Dynamic stability
,
Lubricants
,
Oscillations
,
Pressure
,
Resonance
On the Behavior of Gas-Lubricated Journal Bearings Subjected to Sinusoidally Time-Varying Loads
J. Basic Eng. September 1965, 87(3): 589–598.
doi: https://doi.org/10.1115/1.3650614
Topics:
Journal bearings
,
Stress
,
Rotors
,
Resonance
,
Lubricants
,
Bulk modulus
,
Elastic constants
,
Equilibrium (Physics)
,
Frequency response
,
Pressure
Design and Performance of Gas-Pressurized, Spherical, Space-Simulator Bearings
J. Basic Eng. September 1965, 87(3): 604–612.
doi: https://doi.org/10.1115/1.3650617
Topics:
Bearings
,
Design
,
Errors
,
Torque
,
Film thickness
,
Bearing design
,
Stress
,
Computers
,
Gas flow
,
Vibration
Theory of Externally Pressurized Circular Thrust Porous Gas Bearing
J. Basic Eng. September 1965, 87(3): 613–620.
doi: https://doi.org/10.1115/1.3650618
Topics:
Gas bearings
,
Thrust
,
Flow (Dynamics)
,
Porous materials
,
Bearings
,
Clearances (Engineering)
,
Hydraulic conductivity
,
Pressure
,
Stress
Theoretical Solution as a Boundary Value Problem for Externally Pressurized Porous Gas-Bearings
J. Basic Eng. September 1965, 87(3): 622–630.
doi: https://doi.org/10.1115/1.3650621
The Effect of External Pressurization on Self-Acting Foil Bearings
J. Basic Eng. September 1965, 87(3): 631–638.
doi: https://doi.org/10.1115/1.3650622
Topics:
Foil bearings
,
Pressure
,
Equilibrium (Physics)
,
Lubricants
,
Shapes
The Measurement of Surface Temperatures on Gear Teeth
J. Basic Eng. September 1965, 87(3): 641–651.
doi: https://doi.org/10.1115/1.3650625
Topics:
Gear teeth
,
Temperature
,
Gears
,
Surface roughness
,
Synthetic lubricants
Lubrication Phenomena in Spur Gears: Capacity, Film Thickness Variation, and Efficiency
J. Basic Eng. September 1965, 87(3): 655–663.
doi: https://doi.org/10.1115/1.3650629
Topics:
Film thickness
,
Lubrication
,
Spur gears
,
Lubricants
,
Pressure
,
Shear stress
,
Stress
,
Viscosity
On the Mechanism of Contact Between Metal Surfaces—The Penetrating Depth and the Average Clearance
J. Basic Eng. September 1965, 87(3): 666–672.
doi: https://doi.org/10.1115/1.3650635
Topics:
Clearances (Engineering)
,
Metal surfaces
,
Gaussian distribution
,
Leakage
,
Stress
,
Thermal resistance
A Linearized Turbulent Lubrication Theory
J. Basic Eng. September 1965, 87(3): 675–682.
doi: https://doi.org/10.1115/1.3650640
Topics:
Lubrication theory
,
Turbulence
,
Shear turbulence
,
Differential equations
,
Eddies (Fluid dynamics)
,
Flow (Dynamics)
,
Isotropy
,
Lubrication
,
Momentum
,
Viscosity
On the Mechanics of Non-Newtonian Media
J. Basic Eng. September 1965, 87(3): 689–693.
doi: https://doi.org/10.1115/1.3650644
A Numerical Solution for the Pressure, Temperature, and Film Thickness Between Two Infinitely Long, Lubricated Rolling and Sliding Cylinders, Under Heavy Loads
J. Basic Eng. September 1965, 87(3): 695–704.
doi: https://doi.org/10.1115/1.3650647
Topics:
Cylinders
,
Film thickness
,
Pressure
,
Stress
,
Temperature
,
Elasticity
,
Temperature effects
,
Viscosity
On the Oscillation at the Final Stages of Rolling of a Hard Sphere on an Elastic Base
J. Basic Eng. September 1965, 87(3): 708–711.
doi: https://doi.org/10.1115/1.3650652
Topics:
Oscillations
Fretting Corrosion Caused by Vibration With Rolling Bearings Stationary
J. Basic Eng. September 1965, 87(3): 713–723.
doi: https://doi.org/10.1115/1.3650657
Topics:
Corrosion
,
Rolling bearings
,
Vibration
,
Bearings
,
Damage
,
Deformation
,
Die cutting
,
Failure
,
Lubricants
,
Particulate matter
The Role of Microslip for Freely Rolling Bodies
J. Basic Eng. September 1965, 87(3): 724–728.
doi: https://doi.org/10.1115/1.3650660
Topics:
Geometry
,
Sliding friction
,
Stress
,
Torque
Surface Displacement of a Convective Elastic Half-Space Under an Arbitrarily Distributed Fast-Moving Heat Source
J. Basic Eng. September 1965, 87(3): 729–734.
doi: https://doi.org/10.1115/1.3650661
Topics:
Displacement
,
Elastic half space
,
Heat
,
Convection
,
Elastohydrodynamic lubrication
,
Thermoelasticity
Mechanism of Boundary Lubrication and the Edge Effect
J. Basic Eng. September 1965, 87(3): 735–739.
doi: https://doi.org/10.1115/1.3650662
Topics:
Boundary lubrication
,
Copper
,
Friction
,
Lubricants
,
Thin film lubrication
,
Lubrication
,
Shear strength
Effect of Oxidation on Boundary Friction of Steel in Hydrocarbon Media and Critical Friction Duties Under Which Cold and Hot Seizure (or Welding) Develop
J. Basic Eng. September 1965, 87(3): 741–745.
doi: https://doi.org/10.1115/1.3650666
Topics:
Friction
,
Oxidation
,
Steel
,
Welding
,
Mineral oil
,
Stress
,
Temperature
,
Vacuum
,
Wear
Antiwear and Antifriction Properties of Polyorganosiloxanes and Their Mixtures With Hydrocarbons
J. Basic Eng. September 1965, 87(3): 747–752.
doi: https://doi.org/10.1115/1.3650669
Topics:
Wear
,
Chain
,
Friction
,
Lubricants
,
Mineral oil
,
Oxidation
,
Pharmacokinetics
,
Stability
,
Steel
The Critical Temperature of Oil With Point and Line Contact Machines
J. Basic Eng. September 1965, 87(3): 754–759.
doi: https://doi.org/10.1115/1.3650672
Topics:
Machinery
,
Temperature
,
Metals
,
Cylinders
,
Deformation
,
Disks
,
Heating
,
Mineral oil
,
Oils
,
Petroleum
The Action of Neutral Organic Phosphates as EP Additives
J. Basic Eng. September 1965, 87(3): 761–767.
doi: https://doi.org/10.1115/1.3650676
Topics:
Engines
,
Ester
,
Melting point
,
Metal surfaces
,
Metals
Chemical Modification of Friction Surfaces
J. Basic Eng. September 1965, 87(3): 771–776.
doi: https://doi.org/10.1115/1.3650682
Topics:
Friction
The Magnetohydrodynamic Parallel Plate Slider Bearing
J. Basic Eng. September 1965, 87(3): 778–780.
doi: https://doi.org/10.1115/1.3650685
Topics:
Magnetohydrodynamics
,
Slider bearings
,
Magnetic fields
,
Friction
,
Load bearing capacity
Contributions to the Determination of the Real Clearance in Sliding Bearings
J. Basic Eng. September 1965, 87(3): 781–784.
doi: https://doi.org/10.1115/1.3650686
Calculation of Wear Rate
J. Basic Eng. September 1965, 87(3): 785–790.
doi: https://doi.org/10.1115/1.3650690
Topics:
Wear
,
Surface roughness
,
Deformation
,
Friction
,
Pressure
,
Adhesion
,
Elastic moduli
,
Fatigue
,
Rupture
,
Stress
Lubrication Review: A Digest of the Literature for 1963
M. B. Peterson, T. E. Timkens, R. D. Brown, R. A. Burton, E. E. Klaus, W. J. Wojtowicz, F. J. Villforth, Jr.
J. Basic Eng. September 1965, 87(3): 791–804.
doi: https://doi.org/10.1115/1.3650691
Topics:
Bearings
,
Friction
,
Gears
,
High temperature
,
Lubricants
,
Lubrication
,
Vacuum
Magnetohydrodynamic Squeeze Film Bearings
J. Basic Eng. September 1965, 87(3): 805–809.
doi: https://doi.org/10.1115/1.3650692
Topics:
Bearings
,
Magnetohydrodynamics
,
Electric fields
,
Fluid films
,
Fluids
,
Liquid metals
,
Lubricants
,
Magnetic fields
,
Plates (structures)
,
Symmetry (Physics)
Discussions
Discussion: “The Static and Dynamic Characteristics of the Spiral-Grooved Thrust Bearing” (Malanoski, S. B., and Pan, C. H. T., 1965, ASME J. Basic Eng., 87, pp. 547–555)
J. Basic Eng. September 1965, 87(3): 555–556.
doi: https://doi.org/10.1115/1.3650604
Topics:
Thrust bearings
Closure to “Discussion of ‘The Static and Dynamic Characteristics of the Spiral-Grooved Thrust Bearing’” (1965, ASME J. Basic Eng., 87, pp. 555–556)
J. Basic Eng. September 1965, 87(3): 556–558.
doi: https://doi.org/10.1115/1.3650605
Topics:
Thrust
Discussion: “Characteristics of Herringbone-Grooved, Gas-Lubricated Journal Bearings” (Vohr, J. H., and Chow, C. Y., 1965, ASME J. Basic Eng., 87, pp. 568–576)
J. Basic Eng. September 1965, 87(3): 576.
doi: https://doi.org/10.1115/1.3650608
Topics:
Journal bearings
Discussion: “Characteristics of Herringbone-Grooved, Gas-Lubricated Journal Bearings” (Vohr, J. H., and Chow, C. Y., 1965, ASME J. Basic Eng., 87, pp. 568–576)
J. Basic Eng. September 1965, 87(3): 576–577.
doi: https://doi.org/10.1115/1.3650609
Topics:
Journal bearings
Closure to “Discussions of ‘Characteristics of Herringbone-Grooved, Gas-Lubricated Journal Bearings’” (1965, ASME J. Basic Eng., 87, pp. 576–577)
J. Basic Eng. September 1965, 87(3): 577–578.
doi: https://doi.org/10.1115/1.3650610
Discussion: “On Hydrodynamic Instability of Gas-Lubricated Journal Bearings” (Constantinescu, V. N., 1965, ASME J. Basic Eng., 87, pp. 579–587)
J. Basic Eng. September 1965, 87(3): 587–588.
doi: https://doi.org/10.1115/1.3650612
Topics:
Hydrodynamic stability
,
Journal bearings
Closure to “Discussion of ‘On Hydrodynamic Instability of Gas-Lubricated Journal Bearings’” (1965, ASME J. Basic Eng., 87, pp. 587–588)
J. Basic Eng. September 1965, 87(3): 588.
doi: https://doi.org/10.1115/1.3650613
Topics:
Hydrodynamic stability
Discussion: “On the Behavior of Gas-Lubricated Journal Bearings Subjected to Sinusoidally Time-Varying Loads” (Ausman, J. S., 1965, ASME J. Basic Eng., 87, pp. 589–598)
J. Basic Eng. September 1965, 87(3): 599–602.
doi: https://doi.org/10.1115/1.3650615
Topics:
Journal bearings
,
Stress
Closure to “Discussion of ‘On the Behavior of Gas-Lubricated Journal Bearings Subjected to Sinusoidally Time-Varying Loads’” (1965, ASME J. Basic Eng., 87, pp. 599–602)
J. Basic Eng. September 1965, 87(3): 603.
doi: https://doi.org/10.1115/1.3650616
Topics:
Journal bearings
Discussion: “Theory of Externally Pressurized Circular Thrust Porous Gas Bearing” (Mori, H., Yabe, H., and Ono, T., 1965, ASME J. Basic Eng., 87, pp. 613–620)
J. Basic Eng. September 1965, 87(3): 620.
doi: https://doi.org/10.1115/1.3650619
Topics:
Gas bearings
,
Thrust
Closure to “Discussion of ‘Theory of Externally Pressurized Circular Thrust Porous Gas Bearing’” (1965, ASME J. Basic Eng., 87, p. 620)
J. Basic Eng. September 1965, 87(3): 620–621.
doi: https://doi.org/10.1115/1.3650620
Topics:
Thrust
Discussion: “The Effect of External Pressurization on Self-Acting Foil Bearings” (Wildmann, M., and Wright, A., 1965, ASME J. Basic Eng., 87, pp. 631–638)
J. Basic Eng. September 1965, 87(3): 638–639.
doi: https://doi.org/10.1115/1.3650623
Topics:
Foil bearings
Closure to “Discussion of ‘The Effect of External Pressurization on Self-Acting Foil Bearings’” (1965, ASME J. Basic Eng., 87, pp. 638–639)
J. Basic Eng. September 1965, 87(3): 639–640.
doi: https://doi.org/10.1115/1.3650624
Discussion: “The Measurement of Surface Temperatures on Gear Teeth” (Niemann, G., and Lechner, G., 1965, ASME J. Basic Eng., 87, pp. 641–651)
J. Basic Eng. September 1965, 87(3): 651–653.
doi: https://doi.org/10.1115/1.3650626
Topics:
Gear teeth
,
Temperature
Discussion: “The Measurement of Surface Temperatures on Gear Teeth” (Niemann, G., and Lechner, G., 1965, ASME J. Basic Eng., 87, pp. 641–651)
J. Basic Eng. September 1965, 87(3): 653.
doi: https://doi.org/10.1115/1.3650627
Topics:
Gear teeth
,
Temperature
Closure to “Discussions of ‘The Measurement of Surface Temperatures on Gear Teeth’” (1965, ASME J. Basic Eng., 87, pp. 651–653)
J. Basic Eng. September 1965, 87(3): 653–654.
doi: https://doi.org/10.1115/1.3650628
Topics:
Gears
,
Temperature
Discussion: “Lubrication Phenomena in Spur Gears: Capacity, Film Thickness Variation, and Efficiency” (Adkins, R. Wayne, and Radzimovsky, E. I., 1965, ASME J. Basic Eng., 87, pp. 655–663)
J. Basic Eng. September 1965, 87(3): 663.
doi: https://doi.org/10.1115/1.3650630
Topics:
Film thickness
,
Lubrication
,
Spur gears
Discussion: “Lubrication Phenomena in Spur Gears: Capacity, Film Thickness Variation, and Efficiency” (Adkins, R. Wayne, and Radzimovsky, E. I., 1965, ASME J. Basic Eng., 87, pp. 655–663)
J. Basic Eng. September 1965, 87(3): 663.
doi: https://doi.org/10.1115/1.3650631
Topics:
Film thickness
,
Lubrication
,
Spur gears
Discussion: “Lubrication Phenomena in Spur Gears: Capacity, Film Thickness Variation, and Efficiency” (Adkins, R. Wayne, and Radzimovsky, E. I., 1965, ASME J. Basic Eng., 87, pp. 655–663)
J. Basic Eng. September 1965, 87(3): 663–664.
doi: https://doi.org/10.1115/1.3650632
Topics:
Film thickness
,
Lubrication
,
Spur gears
Discussion: “Lubrication Phenomena in Spur Gears: Capacity, Film Thickness Variation, and Efficiency” (Adkins, R. Wayne, and Radzimovsky, E. I., 1965, ASME J. Basic Eng., 87, pp. 655–663)
J. Basic Eng. September 1965, 87(3): 664.
doi: https://doi.org/10.1115/1.3650633
Topics:
Film thickness
,
Lubrication
,
Spur gears
Closure to “Discussions of ‘Lubrication Phenomena in Spur Gears: Capacity, Film Thickness Variation, and Efficiency’” (1965, ASME J. Basic Eng., 87, pp. 663–664)
J. Basic Eng. September 1965, 87(3): 664–665.
doi: https://doi.org/10.1115/1.3650634
Topics:
Film thickness
,
Lubrication
,
Spur gears
Discussion: “On the Mechanism of Contact Between Metal Surfaces—The Penetrating Depth and the Average Clearance” (Tsukizoe, Tadasu, and Hisakado, Terumasa, 1965, ASME J. Basic Eng., 87, pp. 666–672)
J. Basic Eng. September 1965, 87(3): 672–673.
doi: https://doi.org/10.1115/1.3650636
Topics:
Clearances (Engineering)
,
Metal surfaces
Discussion: “On the Mechanism of Contact Between Metal Surfaces—The Penetrating Depth and the Average Clearance” (Tsukizoe, Tadasu, and Hisakado, Terumasa, 1965, ASME J. Basic Eng., 87, pp. 666–672)
J. Basic Eng. September 1965, 87(3): 673.
doi: https://doi.org/10.1115/1.3650637
Topics:
Clearances (Engineering)
,
Metal surfaces
Discussion: “On the Mechanism of Contact Between Metal Surfaces—The Penetrating Depth and the Average Clearance” (Tsukizoe, Tadasu, and Hisakado, Terumasa, 1965, ASME J. Basic Eng., 87, pp. 666–672)
J. Basic Eng. September 1965, 87(3): 673–674.
doi: https://doi.org/10.1115/1.3650638
Topics:
Clearances (Engineering)
,
Metal surfaces
Closure to “Discussions of ‘On the Mechanism of Contact Between Metal Surfaces—The Penetrating Depth and the Average Clearance’” (1965, ASME J. Basic Eng., 87, pp. 672–674)
J. Basic Eng. September 1965, 87(3): 674.
doi: https://doi.org/10.1115/1.3650639
Topics:
Metal surfaces
Discussion: “A Linearized Turbulent Lubrication Theory” (Ng, Chung-Wah, and Pan, C. H. T., 1965, ASME J. Basic Eng., 87, pp. 675–682)
J. Basic Eng. September 1965, 87(3): 682–683.
doi: https://doi.org/10.1115/1.3650641
Topics:
Lubrication theory
,
Turbulence
Discussion: “A Linearized Turbulent Lubrication Theory” (Ng, Chung-Wah, and Pan, C. H. T., 1965, ASME J. Basic Eng., 87, pp. 675–682)
J. Basic Eng. September 1965, 87(3): 683–687.
doi: https://doi.org/10.1115/1.3650642
Topics:
Lubrication theory
,
Turbulence
Closure to “Discussions of ‘A Linearized Turbulent Lubrication Theory’” (1965, ASME J. Basic Eng., 87, pp. 682–687)
J. Basic Eng. September 1965, 87(3): 687–688.
doi: https://doi.org/10.1115/1.3650643
Topics:
Lubrication
,
Turbulence
Discussion: “On the Mechanics of Non-Newtonian Media” (Tipei, N., 1965, ASME J. Basic Eng., 87, pp. 689–693)
J. Basic Eng. September 1965, 87(3): 693.
doi: https://doi.org/10.1115/1.3650645
Closure to “Discussion of ‘On the Mechanics of Non-Newtonian Media’” (1965, ASME J. Basic Eng., 87, p. 693)
J. Basic Eng. September 1965, 87(3): 694.
doi: https://doi.org/10.1115/1.3650646
Discussion: “A Numerical Solution for the Pressure, Temperature, and Film Thickness Between Two Infinitely Long, Lubricated Rolling and Sliding Cylinders, Under Heavy Loads” (Cheng, H. S., and Sternlicht, B., 1965, ASME J. Basic Eng., 87, pp. 695–704)
J. Basic Eng. September 1965, 87(3): 704–705.
doi: https://doi.org/10.1115/1.3650648
Topics:
Cylinders
,
Film thickness
,
Pressure
,
Stress
,
Temperature
Discussion: “A Numerical Solution for the Pressure, Temperature, and Film Thickness Between Two Infinitely Long, Lubricated Rolling and Sliding Cylinders, Under Heavy Loads” (Cheng, H. S., and Sternlicht, B., 1965, ASME J. Basic Eng., 87, pp. 695–704)
J. Basic Eng. September 1965, 87(3): 705–706.
doi: https://doi.org/10.1115/1.3650649
Topics:
Cylinders
,
Film thickness
,
Pressure
,
Stress
,
Temperature
Discussion: “A Numerical Solution for the Pressure, Temperature, and Film Thickness Between Two Infinitely Long, Lubricated Rolling and Sliding Cylinders, Under Heavy Loads” (Cheng, H. S., and Sternlicht, B., 1965, ASME J. Basic Eng., 87, pp. 695–704)
J. Basic Eng. September 1965, 87(3): 706.
doi: https://doi.org/10.1115/1.3650650
Topics:
Cylinders
,
Film thickness
,
Pressure
,
Stress
,
Temperature
Closure to “Discussions of ‘A Numerical Solution for the Pressure, Temperature, and Film Thickness Between Two Infinitely Long, Lubricated Rolling and Sliding Cylinders, Under Heavy Loads’” (1965, ASME J. Basic Eng., 87, pp. 704–706)
J. Basic Eng. September 1965, 87(3): 706–707.
doi: https://doi.org/10.1115/1.3650651
Topics:
Cylinders
,
Film thickness
,
Pressure
,
Temperature
Discussion: “On the Oscillation at the Final Stages of Rolling of a Hard Sphere on an Elastic Base” (Halaunbrenner, J., and Sukiennik, P., 1965, ASME J. Basic Eng., 87, pp. 708–711)
J. Basic Eng. September 1965, 87(3): 711.
doi: https://doi.org/10.1115/1.3650653
Topics:
Oscillations
Discussion: “On the Oscillation at the Final Stages of Rolling of a Hard Sphere on an Elastic Base” (Halaunbrenner, J., and Sukiennik, P., 1965, ASME J. Basic Eng., 87, pp. 708–711)
J. Basic Eng. September 1965, 87(3): 711.
doi: https://doi.org/10.1115/1.3650654
Topics:
Oscillations
Discussion: “On the Oscillation at the Final Stages of Rolling of a Hard Sphere on an Elastic Base” (Halaunbrenner, J., and Sukiennik, P., 1965, ASME J. Basic Eng., 87, pp. 708–711)
J. Basic Eng. September 1965, 87(3): 711–712.
doi: https://doi.org/10.1115/1.3650655
Topics:
Oscillations
Closure to “Discussions of ‘On the Oscillation at the Final Stages of Rolling of a Hard Sphere on an Elastic Base’” (1965, ASME J. Basic Eng., 87, pp. 711–712)
J. Basic Eng. September 1965, 87(3): 712.
doi: https://doi.org/10.1115/1.3650656
Topics:
Oscillations
Discussion: “Fretting Corrosion Caused by Vibration With Rolling Bearings Stationary” (Pittroff, Hans, 1965, ASME J. Basic Eng., 87, pp. 713–723)
J. Basic Eng. September 1965, 87(3): 723.
doi: https://doi.org/10.1115/1.3650658
Topics:
Corrosion
,
Rolling bearings
,
Vibration
Closure to “Discussion of ‘Fretting Corrosion Caused by Vibration With Rolling Bearings Stationary’” (1965, ASME J. Basic Eng., 87, p. 723)
J. Basic Eng. September 1965, 87(3): 723.
doi: https://doi.org/10.1115/1.3650659
Topics:
Corrosion
,
Rolling bearings
,
Vibration
Discussion: “Mechanism of Boundary Lubrication and the Edge Effect” (Tamai, Y., and Rightmire, B. G., 1965, ASME J. Basic Eng., 87, pp. 735–739)
J. Basic Eng. September 1965, 87(3): 739.
doi: https://doi.org/10.1115/1.3650663
Topics:
Boundary lubrication
Discussion: “Mechanism of Boundary Lubrication and the Edge Effect” (Tamai, Y., and Rightmire, B. G., 1965, ASME J. Basic Eng., 87, pp. 735–739)
J. Basic Eng. September 1965, 87(3): 739–740.
doi: https://doi.org/10.1115/1.3650664
Topics:
Boundary lubrication
Closure to “Discussions of ‘Mechanism of Boundary Lubrication and the Edge Effect’” (1965, ASME J. Basic Eng., 87, pp. 739–740)
J. Basic Eng. September 1965, 87(3): 740.
doi: https://doi.org/10.1115/1.3650665
Topics:
Boundary lubrication
Discussion: “Effect of Oxidation on Boundary Friction of Steel in Hydrocarbon Media and Critical Friction Duties Under Which Cold and Hot Seizure (or Welding) Develop” (Vinogradov, G., Korepova, I. V., Podolsky, Y. Y., and Pavlovskaya, N. T., 1965, ASME J. Basic Eng., 87, pp. 741–745)
J. Basic Eng. September 1965, 87(3): 745.
doi: https://doi.org/10.1115/1.3650667
Closure to “Discussion of ‘Effect of Oxidation on Boundary Friction of Steel in Hydrocarbon Media and Critical Friction Duties Under Which Cold and Hot Seizure (or Welding) Develop’” (1965, ASME J. Basic Eng., 87, p. 745)
J. Basic Eng. September 1965, 87(3): 745–746.
doi: https://doi.org/10.1115/1.3650668
Discussion: “Antiwear and Antifriction Properties of Polyorganosiloxanes and Their Mixtures With Hydrocarbons” (Vinogradov, G. V., Nametkin, N. S., and Nossov, M. I., 1965, ASME J. Basic Eng., 87, pp. 747–752)
J. Basic Eng. September 1965, 87(3): 752.
doi: https://doi.org/10.1115/1.3650670
Topics:
Wear
Closure to “Discussion of ‘Antiwear and Antifriction Properties of Polyorganosiloxanes and Their Mixtures With Hydrocarbons’” (1965, ASME J. Basic Eng., 87, p. 752)
J. Basic Eng. September 1965, 87(3): 752–753.
doi: https://doi.org/10.1115/1.3650671
Topics:
Wear
Discussion: “The Critical Temperature of Oil With Point and Line Contact Machines” (Matveevsky, R. M., 1965, ASME J. Basic Eng., 87, pp. 754–759)
J. Basic Eng. September 1965, 87(3): 759.
doi: https://doi.org/10.1115/1.3650673
Topics:
Machinery
,
Temperature
Discussion: “The Critical Temperature of Oil With Point and Line Contact Machines” (Matveevsky, R. M., 1965, ASME J. Basic Eng., 87, pp. 754–759)
J. Basic Eng. September 1965, 87(3): 759–760.
doi: https://doi.org/10.1115/1.3650674
Topics:
Machinery
,
Temperature
Closure to “Discussions of ‘The Critical Temperature of Oil With Point and Line Contact Machines’” (1965, ASME J. Basic Eng., 87, pp. 759–760)
J. Basic Eng. September 1965, 87(3): 760.
doi: https://doi.org/10.1115/1.3650675
Topics:
Temperature
Discussion: “The Action of Neutral Organic Phosphates as EP Additives” (Barcroft, F. T., and Daniel, S. G., 1965, ASME J. Basic Eng., 87, pp. 761–767)
J. Basic Eng. September 1965, 87(3): 767–768.
doi: https://doi.org/10.1115/1.3650677
Discussion: “The Action of Neutral Organic Phosphates as EP Additives” (Barcroft, F. T., and Daniel, S. G., 1965, ASME J. Basic Eng., 87, pp. 761–767)
J. Basic Eng. September 1965, 87(3): 768.
doi: https://doi.org/10.1115/1.3650678
Discussion: “The Action of Neutral Organic Phosphates as EP Additives” (Barcroft, F. T., and Daniel, S. G., 1965, ASME J. Basic Eng., 87, pp. 761–767)
J. Basic Eng. September 1965, 87(3): 768–769.
doi: https://doi.org/10.1115/1.3650679
Discussion: “The Action of Neutral Organic Phosphates as EP Additives” (Barcroft, F. T., and Daniel, S. G., 1965, ASME J. Basic Eng., 87, pp. 761–767)
J. Basic Eng. September 1965, 87(3): 769.
doi: https://doi.org/10.1115/1.3650680
Closure to “Discussions of ‘The Action of Neutral Organic Phosphates as EP Additives’” (1965, ASME J. Basic Eng., 87, pp. 767–769)
J. Basic Eng. September 1965, 87(3): 769–770.
doi: https://doi.org/10.1115/1.3650681
Discussion: “Chemical Modification of Friction Surfaces” (Sanin, P. I., Shepeleva, E. S., Mannik, A. O., and Kleimenov, B. V., 1965, ASME J. Basic Eng., 87, pp. 771–776)
J. Basic Eng. September 1965, 87(3): 776–777.
doi: https://doi.org/10.1115/1.3650683
Topics:
Friction
Closure to “Discussion of ‘Chemical Modification of Friction Surfaces’” (1965, ASME J. Basic Eng., 87, pp. 776–777)
J. Basic Eng. September 1965, 87(3): 777.
doi: https://doi.org/10.1115/1.3650684
Topics:
Friction
Discussion: “Contributions to the Determination of the Real Clearance in Sliding Bearings” (Nica, Al., 1965, ASME J. Basic Eng., 87, pp. 781–784)
J. Basic Eng. September 1965, 87(3): 784.
doi: https://doi.org/10.1115/1.3650687
Topics:
Bearings
,
Clearances (Engineering)
Discussion: “Contributions to the Determination of the Real Clearance in Sliding Bearings” (Nica, Al., 1965, ASME J. Basic Eng., 87, pp. 781–784)
J. Basic Eng. September 1965, 87(3): 784.
doi: https://doi.org/10.1115/1.3650688
Topics:
Bearings
,
Clearances (Engineering)
Closure to “Discussions of ‘Contributions to the Determination of the Real Clearance in Sliding Bearings’” (1965, ASME J. Basic Eng., 87, p. 784)
J. Basic Eng. September 1965, 87(3): 784.
doi: https://doi.org/10.1115/1.3650689
Topics:
Clearances (Engineering)