Lightweight metal–matrix nanocomposites (MMNCs) (metal matrix with nanosized ceramic particles) can be of significance for automobile, aerospace, and numerous other applications. It would be advantageous to develop effective nanomanufacturing methods for fabrication of bulk components of aluminum based MMNCs through solidification processing. However, it is extremely difficult to disperse nanosized ceramic particles uniformly in molten aluminum. In this paper, a high power ultrasonic probe is used to disperse nanosized SiC particles into molten aluminum alloy A356. Experimental results show that the ultrasonic cavitation based dispersion of nanoparticles in molten aluminum alloy is effective. The uniform nanoparticle dispersion in the Al alloy matrix resulted in significantly improved mechanical properties. To enhance the nanomanufacturing efficiency, various nanoparticle feeding techniques were explored and experimental results are presented.
Issue Section:
Technical Papers
1.
Suresh
, S.
, Mortensen
, A.
, and Needleman
, A.
, 1993, Fundamentals of Metal Matrix Composites
, Butterworth-Heinemann
, Stoneham, MA.2.
Crainic
, N.
, and Marques
, A. T.
, 2002, “Nanocomposites: A State-of-Art Review
,” Key Eng. Mater.
1013-9826, 230–232
, pp. 656
–659
.3.
Rawal
, S.
, 2001, “Metal-Matrix Composites for Space Applications
,” JOM
1047-4838, 53
, pp. 14
–17
.4.
Arsenault
, R. J.
, Wang
, L.
, and Feng
, C. R.
, 1991, “Strengthening of Composites Due to Microstructural Changes in the Matrix
,” Acta Metall. Mater.
0956-7151, 39
(23
), pp. 47
–57
.5.
Nardone
, V. C.
, and Prewo
, K. M.
, 1986, “On the Strength of Discontinuous Silicon Carbide Reinforced Aluminum Composites
,” Scr. Metall.
0036-9748, 20
, pp. 43
–48
.6.
Ramakrishnan
, N.
, 1996, “An Analytical Study on Strengthening of Particulate Reinforced Metal Matrix Composites
,” Acta Mater.
1359-6454, 44
(1
), pp. 69
–77
.7.
Kim
, Y-W.
, and Griffith
, W. M.
, 1998, Dispersion Strengthened Aluminum Alloys
, TMS
, Warrendale, PA.8.
Arsenault
, R. J.
, 1984, “The Strengthening of Aluminum Alloy 6061 by Fiber and Platelet Silicon Carbide
,” Mater. Sci. Eng.
0025-5416, 64
, pp. 171
–181
.9.
Yamasaki
, T.
, Zheng
, Y. J.
, Ogino
, Y.
, Terasawa
, M.
, Mitamura
, T.
, and Fukami
, T.
, 2003, “Formation of Metal–TiN∕TiC Nanocomposite Powders by Mechanical Alloying and Their Consolidation
,” Mater. Sci. Eng., A
0921-5093, 350A
, pp. 168
–172
.10.
Jianhong
, H. E.
, et al. 2000, “Synthesis of Nanostructured WC-12 pct Co Coating Using Mechanical Milling and High Velocity Oxygen Fuel Thermal Spraying
,” Metall. Mater. Trans. A
1073-5623, 31A
, pp. 541
–553
.11.
Tong
, X. C.
, and Fnag
, H. S.
, 1998, “Al‐Tic Composites In Situ-Processed by Ingot Metallurgy and Rapid Solidification Technology: Part 1 Microstructural Evolution
,” Metall. Mater. Trans. A
1073-5623, 29A
, pp. 875
–891
.12.
Tong
, X. C.
, and Fnag
, H. S.
, 1998, “Al‐Tic Composites In Situ-Processed by Ingot Metallurgy and Rapid Solidification Technology: Part 2: Mechanical Behavior
,” Metall. Mater. Trans. A
1073-5623, 29A
, pp. 893
–902
.13.
Sette
, D.
, and Wanderlingh
, F.
, 1962, “Nucleation by Cosmic Rays in Ultrasonic Cavitation
,” Phys. Rev.
0031-899X, 125
, pp. 409
–417
.14.
Wilde
, G.
, and Perepezko
, J. H.
, 2000, “Experimental Study of Particle Incorporation During Dendritic Solidification
,” Mater. Sci. Eng., A
0921-5093, 283
, pp. 25
–37
.15.
Leighton
, T. G.
, 1994, The Acoustic Bubble
, Academic
, London, UK.16.
Suslick
, S.
, Didenko
, Y.
, Fang
, M. M.
, Hyeon
, T.
, Kolbeck
, K. J.
, McNamara
, W. B.
, Midleleni
, M. M.
, and Wong
, M.
, 1999, “Acoustic Cavitation and Its Chemical Consequences
,” Philos. Trans. R. Soc. London, Ser. A
0962-8428, 357A
, pp. 335
–353
.17.
Nyborg
, W. L. M.
, 1965, “Acoustic Streaming
,” Physical Acoustics
, W. P.
Mason
, ed., Academic
, New York, pp. 355
–358
.18.
Campbell
, J.
, 1981, “Effects of Vibration During Solidification
,” Int. Met. Rev.
0308-4590, 26
(2
), pp. 71
–108
.19.
Abramov
, O. V.
, 1994, Ultrasound in Liquid and Solid Metals
, CRC
, Boca Raton, FL, pp. 289
–297
.20.
Ibrahim
, A.
, Mohamed
, F. A.
, and Lavernia
, E. J.
, 1991, “Particulate Reinforced Metal Matrix Composites—A Review
,” J. Mater. Sci.
0022-2461, 26
, pp. 1137
–1156
.21.
Ma
, L.
, Chen
, F.
, and Shu
, G.
, 1995, “Preparation of Fine Particulate Reinforced Metal Matrix Composites by High Intensity Ultrasonic Treatment
,” J. Mater. Sci. Lett.
0261-8028, 14
, pp. 649
–650
.22.
Keppens
, P.
, Mandrus
, D.
, Rankin
, J.
, and Boatner
, L. A.
, 1997, “The Formation of Metal/Metal–Matrix Nanocomposites by the Ultrasonic Dispersion of Immiscible Liquid Metals
,” Mater. Res. Soc. Symp. Proc.
0272-9172, 457
, pp. 243
–246
.23.
Beaman
, J. J.
, Barlow
, J. W.
, Bourell
, D. L.
, Crawford
, R. H.
, Marcus
, H. L.
, and McAlea
, K. P.
, 1997, Solid Freeform Fabrication—A New Direction in Manufacturing
, Kluwer Academic
, Dordrecht, The Netherlands.24.
Yoshiki
, H.
, Tsunekawa
, Y.
, Mohri
, N.
, Okumiya
, M.
, and Niimi
, I.
, 1993, “Influence of Ultrasonic Vibration on the Wettability
,” J. Jpn. Inst. Light Met.
, 43
, pp. 8
–13
.Copyright © 2007
by American Society of Mechanical Engineers
You do not currently have access to this content.
