Graphical Abstract Figure
Abstract
Machining processes produce unwanted remainders of material on the free edges which are called burrs. In particular, the drilling process generates an entry burr and a typically larger exit burr. When drilling stacks of several workpieces, exit and entry burrs are produced simultaneously at the interfaces. The presence of burrs can degrade the static and fatigue strength of the parts and assemblies containing them. An example concerns the burrs formed at the interface during the drilling of multistacks in One-Way-Assembly processes, where deburring is not systematically applied. The effect on fatigue can be significant. Reductions of up to 70% in fatigue life have been reported, even though the explanatory rationale is not clear. This article reviews existing works on burrs, focusing on drilling burrs. A description of the morphology of different types of burrs and of measurement technologies is given. Burr formation mechanisms and their modeling are reviewed. Burr control strategies and the main deburring technologies are examined. The limited literature on the effects of burrs on the static and fatigue strength of mechanical assemblies is also explored.
References
1.
International Organization for Standardization
, 2017
, “ISO 13715: Technical Drawings - Edges of Undefined Shape – Vocabulary and Indications.” https://www.iso.org/standard/61328.html.2.
Aamir
, M.
, Sharif
, A.
, Zahir
, M. Z.
, Giasin
, K.
, and Tolouei-Rad
, M.
, 2023
, “Experimental Assessment of Hole Quality and Tool Condition in the Machining of an Aerospace Alloy
,” Machines
, 11
(7
), p. 726
. 3.
Kumar
, J. P.
, Kishore
, K. P.
, Kumar
, M. R.
, Karthick
, K. S.
, and Gowtham
, S. V.
, 2018
, “Computer Aided Design of Deburring Tool and Taguchi Optimization for Minimization of Burr Size in Drilling of Al 2024
,” Int. J. Pure Appl. Math.
, 117
(7
), pp. 1069
–1075
. https://acadpubl.eu/jsi/2018-119-7/articles/7b/15.pdf4.
Li
, S.
, Zhang
, D.
, Liu
, C.
, and Tang
, H.
, 2020
, “Exit Burr Height Mechanistic Modeling and Experimental Validation for Low-Frequency Vibration-Assisted Drilling of Aluminum 7075-T6 Alloy
,” J. Manuf. Processes
, 56
(A
), pp. 350
–361
. 5.
Jochum
, R.
, Rufin
, A.
, Sisco
, T.
, and Swanstrom
, F.
, 2019
, “Fatigue Considerations in the Development and Implementation of Mechanical Joining Processes for Commercial Airplane Structures
,” Proceedings of the 30th Symposium of the International Committee on Aeronautical Fatigue
, Krakow, Poland
, June 2–7
, pp. 215
–227
.6.
Sisco
, T.
, 2002
, “Achieving “One Up Assembly” by Reduction of Interface Burr Height in Aluminum, Graphite, and Advanced Titanium/Graphite Hybrid (TiGr) Material
,” Proceedings of the 2002 SAE Aerospace Automated Fastening Conference and Exhibition
, Chester, UK
, Oct. 1–3
.7.
Stalley
, M.
, 2002
, “Investigation of Manual One Way Assembly on Primary Wingbox Structure
,” Proceedings of the 2002 SAE Aerospace Automated Fastening Conference and Exhibition
, Chester, UK
, Oct. 1–3
.8.
Carberry
, J. M.
, 2021
, “Reducing the Acquisition Cost of the Next Fighter Jet Using Automation
,” Engineering Degree Thesis, University of Warwick, Warwick, UK.9.
Choi
, J.
, Min
, S.
, and Dornfeld
, D. A.
, 2004
, Finite Element Modelling of Burr Formation in Drilling of a Multi-Layered Material
, Laboratory for Manufacturing and Sustainability, UC Berkeley
, Berkeley, CA
. https://escholarship.org/uc/item/2vb4t7gq10.
Durham
, B. J.
, 2014
, “Determining Appropriate Levels of Robotic Automation in Commercial Aircraft Nacelle Assembly
,” MBA Thesis, MIT Sloan School of Management, Cambridge, MA.11.
Gillespie
, L.
, and Blotter
, P. T.
, 1976
, “The Formation and Properties of Machining Burrs
,” J. Eng. Ind.
, 98
(1
), pp. 66
–74
. 12.
Gillespie
, L.
, 1974
, “The Measurement of Burrs,” Technical Report BDX-613-1120, Bendix Corporation, Kansas City (United States).13.
Gillespie
, L.
, 1976
, “Deburring, an Annotated Bibliography,” Technical Report BDX-613-2112, Bendix Corporation, Kansas City (United States).14.
Gillespie
, L.
, 1979
, “Deburring Precision Miniature Parts
,” Precis. Eng.
, 1
(4
), pp. 189
–198
. 15.
Gillespie
, L.
, 1976
, “Burrs Produced by Drilling,” Technical Report BDX-613-1248, Bendix Corporation, Kansas City, United States.16.
Gillespie
, L.
, 1975
, “Hand Deburring of Precision Parts,” Technical Report, Bendix Corporation, Kansas City, United States.17.
Gillespie
, L. K.
, 1974
, “State of the Art of General Deburring
,” SME International Tool and Manufacturing Show Conference
, Philadelphia, United States
, Apr. 29, 1974
. https://www.osti.gov/biblio/4283057.18.
Ko
, S. L.
, and Dornfeld
, D. A.
, 1991
, “A Study on Burr Formation Mechanism
,” ASME J. Eng. Mater. Technol.
, 113
(1
), pp. 75
–87
. 19.
Chern
, G. L.
, 1993
, “Analysis of Burr Formation and Breakout in Metal Cutting
,” Ph.D. thesis
, Berkeley, United States
.20.
Aurich
, J.
, Dornfeld
, D.
, Arrazola
, P. J.
, Franke
, V.
, Leitz
, L.
, and Min
, S.
, 2009
, “Burrs—Analysis, Control and Removal
,” CIRP Ann.
, 58
(2
), pp. 519
–542
. 21.
Sreenivasulu
, R.
, and Srinivasa Rao
, C.
, 2019
, “Review on Investigations Carried Out on Burr Formation in Drilling During 1975 to 2020
,” Technol. Eng.
, 16
(1
), pp. 43
–57
. 22.
Jin
, S. Y.
, Pramanik
, A.
, Basak
, A. K.
, Prakash
, C.
, Shankar
, S.
, and Debnath
, S.
, 2020
, “Burr Formation and Its Treatments—A Review
,” Int. J. Adv. Manuf. Technol.
, 107
(5–6
), pp. 2189
–2210
. 23.
Kato
, Y.
, Ohmri
, K.
, Hatano
, E.
, and Takazawa
, K.
, 2007
, “The Standardization for the Edge Quality of the Precise Machining Products
,” Adv. Mater. Res.
, 24–25
, pp. 83
–90
. 24.
Da Silva
, L. C.
, da Mota
, P. R.
, da Silva
, M. B.
, Ezugwu
, E. O.
, and Machado
, ÁR
, 2015
, “Study of Burr Behavior in Face Milling of PH 13-8 Mo Stainless Steel
,” CIRP J. Manuf. Sci. Technol.
, 8
, pp. 34
–42
. 25.
Dix
, M.
, Leopold
, J.
, and Neugebauer
, R.
, 2007
, “Modelling, Simulations and Experimental Verification of Size Effects in Burr Formation
,” Second International Conference on New Forming Technology
, Bremen, Germany
, Jun. 20–21, 2007
.26.
Gajrani
, K. K.
, Divse
, V.
, and Joshi
, S. S.
, 2021
, “Burr Reduction in Drilling Titanium using Drills With Peripheral Slits
,” Trans. Indian Inst. Met.
, 74
(5
), pp. 1155
–1172
. 27.
Min
, S.
, Kim
, J.
, and Dornfeld
, D. A.
, 2001
, “Thrust Force Analysis of Drilling Burr Formation Using Finite Element Method
,” 10th International Conference on Precision Engineering (ICPE)
, Boston, UA
, July 18–20
.28.
Pande
, S.
, and Relekar
, H.
, 1986
, “Investigations on Reducing Burr Formation in Drilling
,” Int. J. Mach. Tool Des. Res.
, 26
(3
), pp. 339
–348
. 29.
Avila
, M. C.
, Choi
, J.
, Dornfeld
, D. A.
, Kapgan
, M.
, and Kosarchuk
, R.
, 2004
, Deburring of Cross-Drilled Hole Intersections by Mechanized Cutting
, Laboratory for Manufacturing and Sustainability, UC Berkeley
, Berkeley, CA
. https://escholarship.org/uc/item/60k6x64r30.
Chern
, G. L.
, 2006
, “Study on Mechanisms of Burr Formation and Edge Breakout Near the Exit of Orthogonal Cutting
,” J. Mater. Process. Technol.
, 176
(1–3
), pp. 152
–157
. 31.
Huang
, J.
, Zhu
, Y. M.
, Li
, Q. F.
, and Wang
, G. C.
, 2014
, “Active Control Methods of Cutting Burr in Precision and Ultra-Precision Machining
,” Appl. Mech. Mater.
, 494–495
, pp. 620
–623
. 32.
Ko
, L.
, and Chang
, J. E.
, 2001
, “Development of Drill Geometry for Burr Minimization in Drilling
,” CIRP Ann.
, 51
(1
), pp. 45
–48
. 33.
Pilny
, L.
, 2011
, “High Speed Drilling of Aluminum Plates
,” Ph.D. thesis
, Brno, Czech Republic
.34.
Poór
, D. I.
, Geier
, N.
, Pereszlai
, C.
, and Xu
, J.
, 2021
, “A Critical Review of the Drilling of CFRP Composites: Burr Formation, Characterisation and Challenges
,” Composites Part B
, 223
, pp. 109
–155
. 35.
Vijayaraghavan
, A.
, and Dornfeld
, D.
, 2005
, Challenges in Modeling Machining of Multilayer Materials
, Laboratory for Manufacturing and Sustainability, UC Berkeley
. https://escholarship.org/uc/item/60k6x64r#author.36.
Efstathiou
, C.
, Vakondios
, D.
, Lyronis
, A.
, Sofiakis
, K.
, and Antoniadis
, A.
, 2016
, “Finite Element Modeling and Experimental Study of Burr Formation in Drilling Processes
,” Proceedings of the ASME 2016 International Mechanical Engineering Congress and Exposition (IMECE)
, Phoenix, United States
, Nov. 11–17, 2016
.37.
Min
, S.
, Kim
, J.
, and Dornfeld
, D. A.
, 2001
, “Development of a Drilling Burr Control Chart for Low Alloy Steel, AISI 4118
,” J. Mater. Process. Technol.
, 113
(1–3
), pp. 4
–9
. 38.
Kim
, J.
, Min
, S.
, and Dornfeld
, D. A.
, 2001
, “Optimization and Control of Drilling Burr Formation of AISI 304L and AISI 4118 Based on Drilling Burr Control Charts
,” Int. J. Mach. Tools Manuf.
, 41
(7
), pp. 923
–936
. 39.
Sharif
, A.
, 2022
, “Study on Burr Formation, Tool Wear and Surface Quality in Machining Al6063
,” J. Mater. Manuf.
, 2
, pp. 1
–9
. 40.
Dornfeld
, D. A.
, and Lee
, D. E.
, 2008
, Precision Manufacturing
, Springer
, New York
.41.
Lin
, T. R.
, 2002
, “Cutting Behavior of a TiN-Coated Carbide Drill With Curved Cutting Edges During the High-Speed Machining of Stainless Steel
,” J. Mater. Process. Technol.
, 127
(1
), pp. 8
–16
. 42.
Patil
, R.
, Shinde
, S.
, Marla
, D.
, and Joshi
, S.
, 2016
, “Experimental Analysis of Burr Formation in Drilling of TI-6AL-4V Alloy
,” Int. J. Mechatron. Manuf. Syst.
, 9
(3
), p. 237
. 43.
Ko
, S. L.
, and Lee
, J. K.
, 2001
, “Analysis of Burr Formation in Drilling With a New-Concept Drill
,” J. Mater. Process. Technol.
, 113
(1–3
), pp. 392
–398
. 44.
Dornfeldl
, D. A.
, Kim
, J. S.
, Dechow
, H.
, Hewson
, J.
, and Chen
, L. J.
, 1999
, “Drilling Burr Formation in Titanium Alloy, li-6AI-4V
,” CIRP Ann.
, 48
(1
), pp. 73
–76
. 45.
Newman
, 2009
, “Assessment of Residual Stresses and Hole Quality,” Technical Report DOT/FAA/AR-07/56,V1.46.
Heisel
, U.
, and Schaal
, M.
, 2009
, “Burr Formation in Short Hole Drilling With Minimum Quantity Lubrication
,” Prod. Eng.
, 3
(2
), pp. 157
–163
. 47.
Heisel
, U.
, Schaal
, M.
, and Wolf
, G.
, 2009
, “Burr Formation in Milling with Minimum Quantity Lubrication
,” Prod. Eng.
, 3
(1
), pp. 23
–30
. 48.
Heisel
, U.
, Luik
, M.
, Eisseler
, R.
, and Schaal
, M.
, 2005
, “Prediction of Parameters for the Burr Dimensions in Short-Hole Drilling
,” CIRP Ann.
, 54
(1
), pp. 79
–82
. 49.
Dasgupta
, R.
, 2011
, “On the Distribution of Burrs With Applications
,” Indian J. Stat.
, 72
(1
), pp. 1
–19
. 50.
Nakao
, Y.
, and Watanabe
, Y.
, 2006
, “Measurements and Evaluations of Drilling Burr Profile
,” Proc. Inst. Mech. Eng. Part B J. Eng. Manuf.
, 220
(4
), pp. 513
–523
. 51.
Bi
, S.
, and Liang
, J.
, 2011
, “Experimental Studies and Optimization of Process Parameters for Burrs in Dry Drilling of Stacked Metal Materials
,” Int. J. Adv. Manuf. Technol.
, 53
(9–12
), pp. 867
–876
. 52.
Hafiz Hassan
, M.
, Abdullah
, J.
, Franz
, G.
, Shen
, C. Y.
, and Mahmoodian
, R.
, 2021
, “Effects of Twist Drill Geometry and Drilling Parameters on CFRP/Aluminum Stack Up in Single Shot Drilling
,” J. Compos. Sci.
, 2
(2
), p. 189
. 53.
Jie
, L.
, 2013
, “The Formation and Effect of Interlayer Gap in Dry Drilling of Stacked Metal Materials
,” Int. J. Adv. Manuf. Technol.
, 69
(5–8
), pp. 1263
–1272
. 54.
Mackiney
, M.
, 1993
, “The Effect of Burrs on Slip Capacity in Multiple Bolt Connections
,” B.Sc. thesis
, Oklahoma State University
, United States
. https://hdl.handle.net/11244/13291.55.
Rivero
, A.
, Aramendi
, G.
, Herranz
, S.
, and de Lacalle LN
, L.
, 2006
, “An Experimental Investigation of the Effect of Coatings and Cutting Parameters on the Dry Drilling Performance of Aluminium Alloys
,” Int. J. Adv. Manuf. Technol.
, 28
(1–2
), pp. 1
–11
. 56.
Ding
, S.
, Zheng
, X.
, Wu
, M.
, and Yang
, Q.
, 2022
, “A Novel Sustainable Processing Mode for Burr Classified Prediction of Weak Rigid Drilling Process Using a Fusion Modeling Method
,” Sustainability
, 14
(12
), p. 7429
. 57.
Lee
, K.
, and Dornfeld
, D. A.
, 2005
, “Micro-Burr Formation and Minimization Through Process Control
,” Precis. Eng.
, 29
(2
), pp. 246
–252
. 58.
Mondal
, N.
, Sardar
, B. S.
, Halder
, R. N.
, and Das
, S.
, 2014
, “Observation of Drilling Burr and Finding out the Condition for Minimum Burr Formation
,” Int. J. Manuf. Eng.
, 2014
, pp. 1
–12
. 59.
Olvera
, O.
, and Barrow
, G.
, 1996
, “An Experimental Study of Burr Formation in Square Shoulder Face Milling
,” Int. J. Mach. Tools Manuf.
, 36
(9
), pp. 1005
–1020
. 60.
Pilny
, L.
, De Chiffre
, L.
, Píška
, M.
, and Villumsen
, M. F.
, 2012
, “Hole Quality and Burr Reduction in Drilling Aluminium Sheets
,” CIRP J. Manuf. Sci. Technol.
, 5
(2
), pp. 102
–107
. 61.
Pramanik
, A.
, Basak
, A. K.
, Uddin
, M. S.
, Shankar
, S.
, Debnath
, S.
, and Islam
, M. N.
, 2019
, “Burr Formation During Drilling of Mild Steel at Different Machining Conditions
,” Mater. Manuf. Processes
, 34
(7
), pp. 726
–735
. 62.
Sofronas
, A. S.
, 1975
, “The Formation and Control of Drilling Burrs
,” Ph.D. thesis
, Detroit, United States
.63.
Sokołowski
, A.
, 2010
, “On Burr Height Estimation Based on Axial Drilling Force
,” J. Achiev. Mater. Manuf. Eng.
, 43
(2
), pp. 734
–742
.64.
Yin
, B.
, Wei
, T.
, WenHe
, L.
, Jian
, H.
, and Xin
, S.
, 2017
, “Investigation of Correlation Between Interlayer Gap and Burr Height in Drilling of Stacked Al-7475 Materials
,” Proc. Inst. Mech. Eng. Part B J. Eng. Manuf.
, 231
(11
), pp. 1917
–1930
. 65.
Gaitonde
, V.
, Karnik
, S. R.
, Achyutha
, B. T.
, Siddeswarappa
, B.
, and Davim
, J. P.
, 2009
, “Predicting Burr Size in Drilling of AISI 316L Stainless Steel Using Response Surface Analysis
,” Int. J. Mater. Product Technol.
, 35
(1/2
), p. 228
. 66.
Gaitonde
, V. N.
, Karnik
, S. R.
, Siddeswarappa
, B.
, and Achyutha
, B. T.
, 2008
, “Integrating Box-Behnken Design With Genetic Algorithm to Determine the Optimal Parametric Combination for Minimizing Burr Size in Drilling of AISI 316L Stainless Steel
,” Int. J. Adv. Manuf. Technol.
, 37
(3–4
), pp. 230
–240
. 67.
Gaitonde
, V. N.
, Karnik
, S. R.
, Achyutha
, B. T.
, and Siddeswarappa
, B.
, 2007
, “Methodology of Taguchi Optimization for Multi-Objective Drilling Problem to Minimize Burr Size
,” Int. J. Adv. Manuf. Technol.
, 34
(1–2
), pp. 1
–8
. 68.
Karnik
, S. R.
, and Gaitonde
, V. N.
, 2008
, “Development of Artificial Neural Network Models to Study the Effect of Process Parameters on Burr Size in Drilling
,” Int. J. Adv. Manuf. Technol.
, 39
(5–6
), pp. 439
–453
. 69.
Kilickap
, E.
, 2010
, “Modeling and Optimization of Burr Height in Drilling of Al-7075 Using Taguchi Method and Response Surface Methodology
,” Int. J. Adv. Manuf. Technol.
, 49
(9–12
), pp. 911
–923
. 70.
Kuo
, C. L.
, Soo
, S. L.
, Aspinwall
, D. K.
, Bradley
, S.
, Thomas
, W.
, M’Saoubi
, R.
, Pearson
, D.
, and Leahy
, W.
, 2014
, “Tool Wear and Hole Quality When Single-Shot Drilling of Metallic-Composite Stacks With Diamond-Coated Tools
,” Proc. Inst. Mech. Eng. Part B J. Eng. Manuf.
, 228
(10
), pp. 1314
–1322
. 71.
Abdelhafeez
, A. M.
, 2016
, “Burr Formation and Effects When Drilling Metallic/Composite Stack Assemblies
,” Ph.D. thesis
, Birmingham, United Kingdom
.72.
Hellstern
, C.
, 2009
, “Investigation of Interlayer Burr Formation in the Drilling of Stacked Aluminium Sheets
,” Ph.D. thesis
, Atlanta, United States
.73.
Kondo
, Y.
, and Miyake
, Y.
, 2024
, “Drilling Performance of Aluminum Plates Under Manual Drilling Conditions
,” Int. J. Mech. Eng. Robot. Res.
, 13
(1
), pp. 18
–25
. 74.
Shyha
, I.
, Soo
, S. L.
, Aspinwall
, D. K.
, Bradley
, S.
, Dawson
, S.
, and Pretorius
, C. J.
, 2010
, “Drilling of Titanium/CFRP/Aluminium Stacks
,” Key Eng. Mater.
, 447–448
, pp. 624
–633
. 75.
Melkote
, S.
, Newton
, T. R.
, Hellstern
, C.
, Morehouse
, J. B.
, and Turner
, S.
, 2010
, “Interfacial Burr Formation in Drilling of Stacked Aerospace Materials
,” Proceedings of the CIRP International Conference on Burrs
, Kaiserlauten, Germany
, Apr. 2–3, 2010
.76.
Mondal
, N.
, Mandal
, S.
, and Mandal
, M. C.
, 2020
, “FPA Based Optimization of Drilling Burr Using Regression Analysis and ANN Model
,” Measurement
, 152
, p. 107327
. 77.
Cantero
, J.
, López MM
, T.
, Fernández JA
, C.
, Marcos
, M.
, and Miguélez Garrido
, M. H.
, 2005
, “Dry Drilling of Alloy Ti–6Al–4V
,” Int. J. Mach. Tools Manuf.
, 45
(11
), pp. 1246
–1255
. 78.
Dahnel
, A. N.
, Fauzi
, M. H.
, Raof
, N. A.
, Mokhtar
, S.
, and Khairussaleh
, N. K.
, 2022
, “Tool Wear and Burr Formation During Drilling of Aluminum Alloy 7075 in Dry and With Cutting Fluid
,” Mater. Today: Proc.
, 59
, pp. 808
–813
. 79.
Franczyk
, E.
, Ślusarczyk
, Ł
, and Zębala
, W.
, 2020
, “Drilling Burr Minimization by Changing Drill Geometry
,” Materials
, 13
(14
), p. 3207
. 80.
Ramulu
, M.
, Branson
, T.
, and Kim
, D.
, 2001
, “A Study on the Drilling of Composite and Titanium Stacks
,” Compos. Struct.
, 54
(1
), pp. 67
–77
. 81.
Franczyk
, E.
, and Zębala
, W.
, 2022
, “Optimization of Titanium Alloy Drilling to Minimize the Secondary Burr After Deburring Process
,” Materials
, 15
(23
), p. 8432
. 82.
Da Silva
, L. C.
, de Melo
, A. C.
, Machado
, ÁR
, da Silva
, M. B.
, and Júnior
, A. M.
, 2006
, “Application of Factorial Design for Studying the Burr Behaviour During Face Milling of Motor Engine Blocks
,” J. Mater. Process. Technol.
, 179
(1–3
), pp. 154
–160
. 83.
Koster
, W. P.
, Kohls
, J. B.
, Cammett
, J. T.
, and Cornell
, B. L.
, 1977
, “Verification of Production Hole Quality - Volume 1,” Technical Report for Air Force Materials Laboratory, AFML-TR-77-185, Metcut Research Associates Inc., Cincinnati, United States. https://apps.dtic.mil/sti/tr/pdf/ADB029580.pdf.84.
Machado
, ÁR
, and Kaminise
, A. K.
, 2023
, “Study on Burr Formation in Turning
,” Proceedings of 17th International Congress of Mechanical Engineering (COBEM)
, Sao Paulo, Brazil
, Nov. 10–14
https://abcm.org.br/anais/cobem/2003/html/pdf/COB03-0147.pdf.85.
Régnier
, T.
, Marcon
, B.
, Outeiro
, J.
, Fromentin
, G.
, d’Acunto
, A.
, and Crolet
, A.
, 2019
, “Investigations on Exit Burr Formation Mechanisms Based on Digital Image Correlation and Numerical Modeling
,” Mach. Sci. Technol.
, 23
(6
), pp. 925
–950
. 86.
Gaitonde
, V. N.
, and Karnik
, S. R.
, 2012
, “Minimizing Burr Size in Drilling Using Artificial Neural Network (ANN)-Particle Swarm Optimization (PSO) Approach
,” J. Intell. Manuf.
, 23
(5
), pp. 1783
–1793
. 87.
Abdelhafeez
, A. M.
, Abdelhafeez
, A. M.
, Soo
, S. L.
, Aspinwall
, D. K.
, Dowson
, A.
, and Arnold
, D.
, 2015
, “Burr Formation and Hole Quality When Drilling Titanium and Aluminium Alloys
,” Procedia CIRP
, 37
, pp. 230
–235
. 88.
Gaitonde
, V. N.
, Karnik
, S. R.
, Achyutha
, B. T.
, and Siddeswarappa
, B.
, 2005
, “GA Applications to RSM Based Models for Burr Size Reduction in Drilling
,” J. Sci. Ind. Res.
, 64
, pp. 347
–353
.89.
Mandra
, A. M.
, Jiang
, J.
, and Xi
, F.
, 2021
, “A New Burr Formation Model for Drilling with Tool Wear
,” Int. J. Adv. Manuf. Technol.
, 116
(5–6
), pp. 1437
–1450
. 90.
Jia
, Z. Y.
, Zhang
, C.
, Wang
, F. J.
, Fu
, R.
, and Chen
, C.
, 2020
, “An Investigation of the Effects of Step Drill Geometry on Drilling Induced Delamination and Burr of Ti/CFRP Stacks
,” Compos. Struct.
, 235
, p. 111786
. 91.
Lekkala
, R.
, Bajpai
, V.
, Singh
, R. K.
, and Joshi
, S. S.
, 2011
, “Characterization and Modeling of Burr Formation in Micro-End Milling
,” Precis. Eng.
, 35
(4
), pp. 625
–637
. 92.
Bahçe
, E.
, and Özdemir
, B.
, 2021
, “Burr Measurement Method Based on Burr Surface Area
,” Int. J. Precis. Eng. Manuf. Green Technol.
, 8
(4
), pp. 1287
–1296
. 93.
Lee
, D.
, and Dornfeld
, A.
, 1996
, “Burr Size Measurement Using a Capacitance Sensor
,” J. Korean Soc. Manuf. Technol. Eng.
, 8
(4
), pp. 29
–37
.94.
Jagiella
, M.
, and Fericean
, S.
, 2004
, “Inductive Sensor Systems for the Evaluation of Burrs and Edges in Industrial Applications
,” Proceedings of the Seventh International Conference on Deburring and Surface Finishing
, Berkeley CA
, June 7–9
, pp. 89
–101
.95.
Dornfeld
, D.
, and Lisiewicz
, V.
, 1992
, “Acoustic Emission Feedback for Precision Deburring
,” CIRP Ann.
, 41
(1
), pp. 93
–96
. 96.
Kimmelmann
, M.
, Duntschew
, J.
, Schluchter
, I.
, and Möhring
, H. C.
, 2019
, “Analysis of Burr Formation Mechanisms When Drilling CFRP-Aluminium Stacks Using Acoustic Emission
,” Procedia Manuf.
, 40
, pp. 64
–69
. 97.
Leopold
, J.
, and Schmidt
, G.
, 2004
, “Methods of Burr Measurement and Burr Detection
,” Eighth International Symposium on Measurement and Quality Control in Production
, Düsseldorf, Germany
, Oct. 12–15, 2004
.98.
Shiozaki
, T.
, Tamai
, Y.
, and Urabe
, T.
, 2015
, “Effect of Residual Stresses on Fatigue Strength of High Strength Steel Sheets With Punched Holes
,” Int. J. Fatigue
, 80
, pp. 324
–331
. 99.
Gillespie
, L.
, 1976
, “Burrs Produced by End Milling,” Technical Report BDX-613-1503, Bendix Corporation, Kansas City, United States.100.
Debard
, B.
, Pierre-André
, R. E.
, Cherif
, M.
, Chiron
, T.
, Sommier
, A.
, and Chavatte
, T.
, 2024
, “Experimental Analysis of Burr Formation During Ti6Al4V Drilling
,” 27th International ESAFORM Conference on Material Forming
, Toulouse, France
, Apr. 24–26, 2024
.101.
Abdelhafeez
, A. M.
, Soo
, S. L.
, Aspinwall
, D.
, Dowson
, A.
, and Arnold
, D.
, 2016
, “A Coupled Eulerian Lagrangian Finite Element Model of Drilling Titanium and Aluminium Alloys
,” SAE Int. J. Aerosp.
, 9
(1
), pp. 198
–207
. 102.
Abdelhafeez
, A. M.
, Soo
, S. L.
, Aspinwall
, D. K.
, Arnold
, D.
, and Dowson
, A.
, 2020
, “An Analytical Model to Predict Interlayer Burr Size Following Drilling of CFRP-Metallic Stack Assemblies
,” CIRP Ann.
, 69
(1
), pp. 109
–112
. 103.
Guo
, Y. B.
, and Dornfeld
, D. A.
, 2000
, “Finite Element Modeling of Burr Formation Process in Drilling 304 Stainless Steel
,” ASME J. Manuf. Sci. Eng.
, 122
(4
), pp. 612
–619
. 104.
Min
, S.
, Dornfeld
, D. A.
, Kim
, J.
, and Shyu
, B.
, 2001
, “Finite Element Modelling of Burr Formation in Metal Cutting
,” Mach. Sci. Technol.
, 5
(3
), pp. 307
–322
. 105.
Lacombe
, A.
, 2021
, “Influence du procede de percage sur l’integrite de surface et la tenue en fatigue de pieces percees en AA2024T351
,” PhD Thesis, Toulousehttps://theses.hal.science/tel-03208811/.106.
Lauderbaugh
, L. K.
, 2009
, “Analysis of the Effects of Process Parameters on Exit Burrs in Drilling Using a Combined Simulation and Experimental Approach
,” J. Mater. Process. Technol.
, 209
(4
), pp. 1909
–1919
. 107.
Saunders
, L. K. L.
, and Mauch
, C.
, 2001
, “An Exit Burr Model for Drilling of Metals
,” ASME J. Manuf. Sci. Eng.
, 123
(4
), pp. 562
–566
. 108.
Rana
, A.
, Dongre
, G.
, and Joshi
, S. S.
, 2019
, “Analytical Modeling of Exit Burr in Drilling of Ti6Al4V Alloy
,” Sãdhanã
, 44
(6
), p. 133
. 109.
Abdel Mohsen Mahdy
, M.
, 2001
, “Economic Drilling Conditions for a Given Deburring Radius
,” J. Mater. Process. Technol.
, 110
(2
), pp. 197
–205
. 110.
Choi
, J.
, and Min
, S.
, 2003
, Modeling of Inter-Layer Gap Formation in Drilling of a Multi-Layered Material
, Laboratory for Manufacturing and Sustainability, UC Berkeley
, Berkeley, CA
. https://escholarship.org/uc/item/2vb4t7gq111.
Hu
, Y.
, Song
, Y.
, Li
, Y.
, and Yao
, Z.
, 2019
, “An Analytical Model to Predict Interfacial Burr Height for Metal Stack Drilling
,” Proc. Inst. Mech. Eng. Part B J. Eng. Manuf.
, 233
(1
), pp. 99
–108
. 112.
Pardo
, A.
, Cseke
, A.
, Heinemann
, R.
, and Whiffen
, R.
, 2019
, “The Effect of Interlayer Gap Width on Burr Formation in Drilling of Aluminium-Aluminium Aerospace Stacks
,” Int. J. Adv. Manuf. Technol.
, 104
(5–8
), pp. 3035
–3043
. 113.
Kuo
, C.
, Soo
, S. L.
, Aspinwall
, D. K.
, Carr
, C.
, Bradley
, S.
, M’Saoubi
, R.
, and Leahy
, W.
, 2018
, “Development of Single Step Drilling Technology for Multilayer Metallic-Composite Stacks Using Uncoated and PVD Coated Carbide Tools
,” J. Manuf. Processes
, 31
, pp. 286
–300
. 114.
Tian
, W.
, Hu
, J.
, Liao
, W.
, Bu
, Y.
, and Zhang
, L.
, 2016
, “Formation of Interlayer Gap and Control of Interlayer Burr in Dry Drilling of Stacked Aluminum Alloy Plates
,” Chin. J. Aeronaut.
, 29
(1
), pp. 283
–291
. 115.
Astakhov
, V. P.
, and Outeiro
, J. C.
, 2008
, “Metal Cutting Mechanics, Finite Element Modelling,” Machining
, J.
Paulo Davim
, ed., Springer
, London, UK
, pp. 1
–27
.116.
Aamir
, M.
, Giasin
, K.
, Tolouei-Rad
, M.
, and Vafadar
, A.
, 2020
, “A Review: Drilling Performance and Hole Quality of Aluminium Alloys for Aerospace Applications
,” J. Mater. Res. Technol.
, 9
(6
), pp. 12484
–12500
. 117.
Sun
, J. S.
, Lee
, K. H.
, and Lee
, H. P.
, 2000
, “Comparison of Implicit and Explicit Finite Element Methods for Dynamic Problems
,” J. Mater. Process. Technol.
, 105
(1
), pp. 110
–118
. 118.
Galloway
, D.
, 1957
, “Some Experiments on the Influence of Various Factors on Drill Performance
,” Trans. ASME
, 79
(2
), pp. 191
–224
. 119.
Kim
, J.
, and Dornfeld
, D. A.
, 2002
, “Development of an Analytical Model for Drilling Burr Formation in Ductile Materials
,” ASME J. Eng. Mater. Technol.
, 124
(2
), pp. 192
–198
. 120.
Williams
, R. A.
, 1974
, “A Study of the Drilling Process
,” ASME J. Eng. Ind.
, 96
(4
), pp. 1207
–1215
. 121.
Merchant
, M. E.
, 1945
, “Mechanics of the Metal Cutting Process. I. Orthogonal Cutting and a Type 2 Chip
,” J. Appl. Phys.
, 16
(5
), pp. 267
–275
. 122.
Zai
, P.
, Tong
, J.
, Liu
, Z.
, Zhang
, Z.
, Song
, C.
, and Zhao
, B.
, 2021
, “Analytical Model of Exit Burr Height and Experimental Investigation on Ultrasonic-Assisted High-Speed Drilling Micro-Holes
,” J. Manuf. Processes
, 68
, pp. 807
–817
. 123.
Conway
, H.
, 1948
, “The Bending of Symmetrically Loaded Circular Plates of Variable Thickness
,” ASME J. Appl. Mech.
, 16
(2
), pp. 1
–6
. 124.
Segonds
, S.
, Masounave
, J.
, Songmene
, V.
, and Bès
, C.
, 2013
, “A Simple Analytical Model for Burr Type Prediction in Drilling of Ductile Materials
,” J. Mater. Process. Technol.
, 213
(6
), pp. 971
–977
. 125.
Saunders
, L. K. L.
, 2003
, “A Finite Element Model of Exit Burrs for Drilling of Metals
,” Finite Elem. Anal. Des.
, 40
(2
), pp. 139
–158
. 126.
Park
, I. W.
, and Dornfeld
, D. A.
, 2000
, “A Study of Burr Formation Processes Using the Finite Element Method: Part II—The Influences of Exit Angle, Rake Angle, and Backup Material on Burr Formation Processes
,” ASME J. Eng. Mater. Technol.
, 122
(2
), pp. 229
–237
. 127.
Park
, I. W.
, and Dornfeld
, D. A.
, 2000
, “A Study of Burr Formation Processes Using the Finite Element Method: Part I
,” ASME J. Eng. Mater. Technol.
, 122
(2
), pp. 221
–228
. 128.
Isbilir
, O.
, and Ghassemieh
, E.
, 2011
, “Finite Element Analysis of Drilling of Titanium Alloy
,” Procedia Eng.
, 10
, pp. 1877
–1882
. 129.
Köklü
, U.
, 2012
, “Influence of the Process Parameters and the Mechanical Properties of Aluminum Alloys on the Burr Height and the Surface Roughness in Dry Drilling
,” Mater. Tehnol.
, 46
(2
), pp. 103
–108
. http://mit.imt.si/izvodi/mit122/koklu.pdf.130.
Nouari
, M.
, List
, G.
, Girot
, F.
, and Coupard
, D.
, 2003
, “Experimental Analysis and Optimisation of Tool Wear in Dry Machining of Aluminium Alloys
,” Wear
, 255
(7–12
), pp. 1359
–1368
. 131.
Ko
, S. L.
, Chang
, J. E.
, and Yang
, G. E.
, 2003
, “Burr Minimizing Scheme in Drilling
,” J. Mater. Process. Technol.
, 140
(1–3
), pp. 237
–242
. 132.
Eynian
, M.
, Das
, K.
, and Wretland
, A.
, 2017
, “Effect of Tool Wear on Quality in Drilling of Titanium Alloy Ti6Al4V, Part I: Cutting Forces, Burr Formation, Surface Quality and Defects
,” High Speed Mach.
, 3
(1
), pp. 1
–10
. 133.
Lin
, T. R.
, 2000
, “Experimental Study of Burr Formation and Tool Chipping in the Face Milling of Stainless Steel
,” J. Mater. Process. Technol.
, 108
(1
), pp. 12
–20
. 134.
Rimpault
, X.
, Chatelain
, J. F.
, Klemberg-Sapieha
, J. E.
, and Balazinski
, M.
, 2017
, “Burr Height Monitoring While Drilling CFRP/Titanium/Aluminium Stacks
,” Mech. Ind.
, 18
(1
), p. 114
. 135.
Yuan
, C. G.
, Pramanik
, A.
, Basak
, A. K.
, Prakash
, C.
, and Shankar
, S.
, 2021
, “Drilling of Titanium Alloy (Ti6Al4V) – A Review
,” Mach. Sci. Technol.
, 25
(4
), pp. 637
–702
. 136.
Kim
, K.
, Cho
, C. H.
, Jeon
, S. Y.
, Lee
, K.
, and Dornfeld
, D. A.
, 2003
, “Drilling and Deburring in a Single Process
,” Proc. Inst. Mech. Eng. Part B J. Eng. Manuf.
, 217
(9
), pp. 1327
–1331
. 137.
Cedergren
, S.
, Olovsjö
, S.
, Sjöberg
, G.
, and Nyborg
, L.
, 2013
, “The Effects of Grain Size and Feed Rate on Notch Wear and Burr Formation in Wrought Alloy 718
,” Int. J. Adv. Manuf. Technol.
, 67
(5–8
), pp. 1501
–1507
. 138.
Lee
, K.
, Stirn
, B.
, and Dornfeld
, D. A.
, 2002
, “Burr Formation in Micro-Machining Aluminum, 6061-T6,” Initiatives of Precision Engineering at the Beginning of a Millennium
, I.
Inasaki
, ed., Springer
, Boston, MA
, pp. 47
–51
.139.
Uddin
, M.
, Basak
, A.
, Pramanik
, A.
, Singh
, S.
, Krolczyk
, G. M.
, and Prakash
, C.
, 2018
, “Evaluating Hole Quality in Drilling of Al 6061 Alloys
,” Materials
, 11
(12
), p. 2443
. 140.
Waqar
, S.
, Asad
, S.
, Ahmad
, S.
, Abbas
, C. A.
, and Elahi
, H.
, 2016
, “Effect of Drilling Parameters on Hole Quality of Ti-6Al-4V Titanium Alloy in Dry Drilling
,” Mater. Sci. Forum
, 880
, pp. 33
–36
. 141.
Zhu
, Z.
, Guo
, K.
, Sun
, J.
, Li
, J.
, Liu
, Y.
, Zheng
, Y.
, and Chen
, L.
, 2018
, “Evaluation of Novel Tool Geometries in Dry Drilling Aluminium 2024-T351/Titanium Ti6Al4V Stack
,” J. Mater. Process. Technol.
, 259
, pp. 270
–281
. 142.
Dechow
, H.
, 1998
, “Influence of the Tool on Hole Quality When Drilling Ti-6AI-4V Including the Aspects of Reaming
,” Ph.D. thesis
, Berkeley, United States
.143.
Lin
, T. R.
, and Shyu
, R. F.
, 2000
, “Improvement of Tool Life and Exit Burr Using Variable Feeds When Drilling Stainless Steel With Coated Drills
,” Int. J. Adv. Manuf. Technol.
, 16
(5
), pp. 308
–313
. 144.
Tiabi
, A.
, “Formation des bavures d’usinage et finition de pièces
,” MSc Thesis, Université du Québec, Québec, Canada. https://espace.etsmtl.ca/id/eprint/289/.145.
Gillespie
, L.
, 1999
, Deburring and Edge Finishing Handbook
, Society of Manufacturing Engineers
, Southfield, MI
.146.
Gillespie
, L. K.
, 2001
, Your Burr Technology Efforts Changed the World
, Deburring Technology International
, Kansas City, United States
. https://www.larouxgillespie.com/burrhist.pdf.147.
Ramachandran
, N.
, Pande
, S. S.
, and Ramakrishnan
, N.
, 1994
, “The Role of Deburring in Manufacturing: A State-of-the-Art Survey
,” J. Mater. Process. Technol.
, 44
(1–2
), pp. 1
–13
. 148.
Berger
, K.
, 2002
, “Burr Reduction Investment - Production Costs - Burr Reduction - Prediction of Burrs
,” Presentation at HPC Workshop
, Paris, France
, Jan. 2002
.149.
Dornfeld
, D.
, and Min
, S.
, 2009
, “A Review of Burr Formation in Machining
,” Proceedings of the CIRP International Conference on Burrs
, Berlin (Germany)
, Apr. 2–3, 2009
, pp. 3
–11
.150.
Hockauf
, W.
, 2002
, “Burr Reduction Investment—Production Costs—Burr Reduction—Prediction of Burrs
,” CIRP HPC Workshop
, Paris
.151.
Kubota
, H.
, Tabei
, H.
, and Sawairi
, Y.
, 1992
, “Development of a Drilling Tool With a Function of Deburring
,” J. Jpn. Soc. Precis. Eng
, 58
, pp. 655
–660
. 152.
Shaomin
, L.
, Deyuan
, Z.
, Daxi
, G.
, Zhenyu
, S.
, and Hui
, T.
, 2019
, “Modeling and Drilling Parameters Optimization on Burr Height Using Harmony Search Algorithm in Low-Frequency Vibration-Assisted Drilling
,” Int. J. Adv. Manuf. Technol.
, 101
(9–12
), pp. 2313
–2325
. 153.
Davidson
, D. A.
, 2007
, “Surface Condition Impacts Part Performance
,” Met. Finish.
, 105
(2
), pp. 22
–31
. 154.
Abdelhafeez
, A. M.
, Soo
, S. L.
, Aspinwall
, D. K.
, Dowson
, A.
, and Arnold
, D.
, 2018
, “The Influence of Burr Formation and Feed Rate on the Fatigue Life of Drilled Titanium and Aluminium Alloys Used in Aircraft Manufacture
,” CIRP Ann.
, 67
(1
), pp. 103
–108
. 155.
Eldieb
, A.
, and Anayi
, F.
, 2016
, “Evaluation of Loss Generated by Edge Burrs in Electrical Steels
,” IEEE Trans. Magn.
, 52
(5
), pp. 1
–4
. 156.
Dols
, S.
, 2016
, “Développement d’une Nouvelle Méthode de Serrage Intelligente Pour le Contrôle des Assemblages Boulonnés
,” Ph.D. thesis
, Toulouse, France
. https://theses.hal.science/tel-02083610.157.
Zwerneman
, F. J.
, 1991
, “The Effect of Burrs on Shear Capacity of Bolted Connections,” Technical Report, Ocklahoma State University, Ocklahoma, United States. https://www.aisc.org/globalassets/the-effect-of-burrs-on-shear-capacity-of-bolted-connections.pdf.158.
Chiza
, A.
, Annan
, C. D.
, and Lévesque
, É
, 2013
, “Experimental Evaluation of Slip Resistance for Corrosion-Resistant Metallized Faying Surfaces in Steel Bridge Connections
,” Canadian Society for Civil Engineering (CSCE) 2013 General Conference
, Montreal, Canada
, May 29–Jun. 1, 2013
. https://legacy.csce.ca/elf/apps/CONFERENCEVIEWER/conferences/2013/pdfs/general/146.pdf.159.
Annan
, C. D.
, Ampleman
, M.
, Fafard
, M.
, and Levesque
, E.
, 2016
, “Long-Term Creep Performance of Metalized Faying Surfaces Used With Slip- Critical Bolted Connections
,” World Steel Bridge Symposium, National Steel Bridge Alliance, American Institute of Steel Construction
, Orlando, FL
, Apr. 13–15
.160.
Schijve
, J.
, 2010
, Fatigue of Structures and Materials
, 2nd ed., Springer
, Dordrecht, Netherlands
.161.
Polyzois
, 1996
, “Effect of Burrs on Bolted Friction Connections
,” Mod. Steel Constr.
, 5
, pp. 64
–65
. https://www.aisc.org/globalassets/modern-steel/archives/1996/01/1996v01_rcsc_burrs.pdf.162.
RCSC
, 2020
, “Specification for Structural Joints Using High Strenght Bolts.” https://www.aisc.org/globalassets/product-files-not-searched/publications/standards/a348-20w.pdf.163.
Barter
, S.
, Molent
, L.
, and Wanhill
, R. J.
, 2012
, “Typical Fatigue-Initiating Discontinuities in Metallic Aircraft Structures
,” Int. J. Fatigue
, 41
, pp. 11
–22
. 164.
Nix
, J. C.
, 1981
, “The Metallography of Fatigue in High Strength Aluminium Alloys
,” Ph.D. thesis
, London, UK
.165.
Nishimura
, 2002
, “Fatigue Performance of Open Drilled Holes With Burrs
,” J. Test. Eval.
, 30
(6
), pp. 478
–482
. 166.
Lanciotti
, A.
, and Polese
, C.
, 2008
, “Fatigue Properties of Monolithic and Metal-Laminated Aluminium Open-Hole Specimens
,” Fatigue Fract. Eng. Mater. Struct.
, 31
(10
), pp. 911
–917
. 167.
Lorenzo
, M.
, Alegre
, J. M.
, and Cuesta
, I. I.
, 2013
, “Magnesium Alloy Defectology AZ91D High-Pressure Die Cast and Influence on the Fatigue Behaviour
,” Fatigue Fract. Eng. Mater. Struct.
, 36
(10
), pp. 1017
–1026
. 168.
Matsunaga
, H.
, Murakami
, Y.
, Kubota
, M.
, and Lee
, J. H.
, 2003
, “Fatigue Strength of Ti-6Al-4V Alloys Containing Small Artificial Defects
,” J. Soc. Mater. Sci. Jpn
, 52
(12Appendix
), pp. 263
–269
. 169.
Vallellano
, C.
, Domínguez Abascal
, J.
, Portal
, A.
, and Arroyo
, P.
, 2022
, “Influencia en la Vida a Fatiga de la Presencia de Rebaba en la Intercara en Uniones Hibridas Aluminio-CFRP Remachadas
,” Anal. Mecánica Fract.
, 32
(1
), pp. 412
–417
. https://hdl.handle.net/11441/129486.170.
Moore
, T. K.
, 1978
, “The Influence of Hole Processing and Joint Variables on the Fatigue Life of Shear Joints
,” Technical Report for Defense Technical Information Center, ADA054770, Air Force Materials Lab Wright-Patterson. https://apps.dtic.mil/sti/citations/ADA054770.171.
A. International
, 1989
, ASM Handbook Volume 16 – Machining
, ASM International
, Almere, Netherlands
.
