Volume 118 Issue 4 | J. Manuf. Sci. Eng.

Skip Nav Destination

Volume 118, Issue 4

November 1996

ISSN 1087-1357

EISSN 1528-8935

Research Papers

A Flexible Ball-End Milling System Model for Cutting Force and Machining Error Prediction

Hsi-Yung Feng, Chia-Hsiang Menq

J. Manuf. Sci. Eng. November 1996, 118(4): 461–469. doi: https://doi.org/10.1115/1.2831055

Abstract

View articletitled, A Flexible Ball-End Milling System Model for Cutting Force and Machining Error Prediction

Open the PDF for in another window

Topics: Cutting , Errors , Machining , Milling , Deflection , Flexible systems , Geometry , Algorithms , Feedback , Steady state

Thermo-Viscoplastic Modeling of Machining Process Using a Mixed Finite Element Method

Jung-Shu Wu, O. W. Dillon, Jr., Wei-Yang Lu

J. Manuf. Sci. Eng. November 1996, 118(4): 470–482. doi: https://doi.org/10.1115/1.2831056

Abstract

View articletitled, Thermo-Viscoplastic Modeling of Machining Process Using a Mixed Finite Element Method

Open the PDF for in another window

Topics: Finite element methods , Machining , Modeling , Cutting , Deformation , Friction , Heat , Stress , Alloys , Aluminum

Determination of Surface Residual Stresses in Machined Ceramics Using Indentation Fracture

Y. Ahn, S. Chandrasekar, T. N. Farris

J. Manuf. Sci. Eng. November 1996, 118(4): 483–489. doi: https://doi.org/10.1115/1.2831057

Abstract

View articletitled, Determination of Surface Residual Stresses in Machined Ceramics Using Indentation Fracture

Open the PDF for in another window

Topics: Ceramics , Fracture (Materials) , Fracture (Process) , Residual stresses , Machining , Stress , Deflection , X-ray diffraction , Ferrites (Magnetic materials) , Fracture mechanics

Study of Electrochemical Jet Machining Process

J. Kozak, K. P. Rajurkar, R. Balkrishna

J. Manuf. Sci. Eng. November 1996, 118(4): 490–498. doi: https://doi.org/10.1115/1.2831058

Abstract

View articletitled, Study of Electrochemical Jet Machining Process

Open the PDF for in another window

Topics: Machining , Electrolytes , Aircraft , Control systems , Cooling , Drilling , Drills (Tools) , Electric fields , Electrical conductivity , Electrodes

Active Thermal Preload Regulation for Machine Tool Spindles With Rolling Element Bearings

J. F. Tu, J. L. Stein

J. Manuf. Sci. Eng. November 1996, 118(4): 499–505. doi: https://doi.org/10.1115/1.2831059

Abstract

View articletitled, Active Thermal Preload Regulation for Machine Tool Spindles With Rolling Element Bearings

Open the PDF for in another window

Topics: Bearings , Cooling , Flow (Dynamics) , Fluctuations (Physics) , Heat , Heating , Machine tool spindles , Machine tools , Machining , Rolling bearings

Modular CNC Design for Intelligent Machining, Part 1: Design of a Hierarchical Motion Control Module for CNC Machine Tools

Y. Altintas¸, N. Newell, M. Ito

J. Manuf. Sci. Eng. November 1996, 118(4): 506–513. doi: https://doi.org/10.1115/1.2831060

Abstract

View articletitled, Modular CNC Design for Intelligent Machining, Part 1: Design of a Hierarchical Motion Control Module for CNC Machine Tools

Open the PDF for in another window

Topics: Computer numerical control machine tools , Design , Machining , Motion control , Position control , Process control , Algorithms , Machine tools , Manufacturing , Buses

Modular CNC Design for Intelligent Machining, Part 2: Modular Integration of Sensor Based Milling Process Monitoring and Control Tasks

Y. Altintas¸, W. K. Munasinghe

J. Manuf. Sci. Eng. November 1996, 118(4): 514–521. doi: https://doi.org/10.1115/1.2831061

Abstract

View articletitled, Modular CNC Design for Intelligent Machining, Part 2: Modular Integration of Sensor Based Milling Process Monitoring and Control Tasks

Open the PDF for in another window

Topics: Computer numerical control machine tools , Design , Machining , Milling , Process monitoring , Sensors , Process control , Cutting , Adaptive control , Algorithms

Fuzzy Adaptive Control of Machining Processes With a Self-Learning Algorithm

Pau-Lo Hsu, Wei-Ru Fann

J. Manuf. Sci. Eng. November 1996, 118(4): 522–530. doi: https://doi.org/10.1115/1.2831062

Abstract

View articletitled, Fuzzy Adaptive Control of Machining Processes With a Self-Learning Algorithm

Open the PDF for in another window

Topics: Adaptive control , Algorithms , Machining , Cutting , Control equipment , Fuzzy logic , Machining centers , Manufacturing industry , Simulation

Accurate Robot Motion-Time Model of Start/Stop Point-to-Point Operations

Ching-Cheng Wang

J. Manuf. Sci. Eng. November 1996, 118(4): 531–538. doi: https://doi.org/10.1115/1.2831064

Abstract

View articletitled, Accurate Robot Motion-Time Model of Start/Stop Point-to-Point Operations

Open the PDF for in another window

Topics: Robots , Feedback , Errors

A Digraphic Approach for Dimensional Chain Identification in Design and Manufacturing

P. Ji, J. Y. H. Fuh, R. S. Ahluwalia

J. Manuf. Sci. Eng. November 1996, 118(4): 539–544. doi: https://doi.org/10.1115/1.2831065

Abstract

View articletitled, A Digraphic Approach for Dimensional Chain Identification in Design and Manufacturing

Open the PDF for in another window

Topics: Chain , Design , Manufacturing , Dimensions

An Evaluation of Chip Separation Criteria for the FEM Simulation of Machining

J. M. Huang, J. T. Black

J. Manuf. Sci. Eng. November 1996, 118(4): 545–554. doi: https://doi.org/10.1115/1.2831066

Abstract

View articletitled, An Evaluation of Chip Separation Criteria for the FEM Simulation of Machining

Open the PDF for in another window

Topics: Finite element methods , Finite element model , Machining , Separation (Technology) , Simulation , Stress , Cutting , Geometry , Shear stress , Shear (Mechanics)

Monitoring of Thermal Energy Distribution in Abrasive Waterjet Cutting Using Infrared Thermography

R. Kovacevic, R. Mohan, H. E. Beardsley

J. Manuf. Sci. Eng. November 1996, 118(4): 555–563. doi: https://doi.org/10.1115/1.2831067

Abstract

View articletitled, Monitoring of Thermal Energy Distribution in Abrasive Waterjet Cutting Using Infrared Thermography

Open the PDF for in another window

Topics: Thermal energy , Thermography , Water jet cutting , Cutting , Heat , Nozzles , Temperature , Thermal conductivity , Thermocouples , Visualization

A Theoretical Study of Erosion Phenomenon in Abrasive Jet Machining

A. P. Verma, G. K. Lal

J. Manuf. Sci. Eng. November 1996, 118(4): 564–570. doi: https://doi.org/10.1115/1.2831068

Abstract

View articletitled, A Theoretical Study of Erosion Phenomenon in Abrasive Jet Machining

Open the PDF for in another window

Topics: Erosion , Machining , Drilling , Fracture mechanics , Particulate matter , Theoretical analysis , Two-phase flow

Distributed-Parameter Control of the Heat Source Trajectory in Thermal Materials Processing

C. Doumanidis, N. Fourligkas

J. Manuf. Sci. Eng. November 1996, 118(4): 571–578. doi: https://doi.org/10.1115/1.2831069

Abstract

View articletitled, Distributed-Parameter Control of the Heat Source Trajectory in Thermal Materials Processing

Open the PDF for in another window

Topics: Heat , Materials processing , Trajectories (Physics) , Temperature , Computer simulation , Control equipment , Feedback , Heat treating (Metalworking) , Manufacturing , Mechanical properties

Central Bursting and Optimal Die Profile for Axisymmetric Extrusion

N. Venkata Reddy, P. M. Dixit, G. K. Lal

J. Manuf. Sci. Eng. November 1996, 118(4): 579–584. doi: https://doi.org/10.1115/1.2831070

Abstract

View articletitled, Central Bursting and Optimal Die Profile for Axisymmetric Extrusion

Open the PDF for in another window

Topics: Extruding , Materials properties , Pressure

An Innovative Approach to Increase the Accuracy of Multi-Axis Machines for Process-Intermittent Inspection

J. Mou, C. R. Liu

J. Manuf. Sci. Eng. November 1996, 118(4): 585–594. doi: https://doi.org/10.1115/1.2831071

Abstract

View articletitled, An Innovative Approach to Increase the Accuracy of Multi-Axis Machines for Process-Intermittent Inspection

Open the PDF for in another window

Topics: Inspection , Machinery , Errors , Modeling , Algorithms , Machining centers , Uncertainty , Computer simulation , Coordinate measuring machines , Dimensions

Modeling and Calibration of a Structured-light Optical CMM via Skewed Frame Representation

Chenggang Che, Jun Ni

J. Manuf. Sci. Eng. November 1996, 118(4): 595–603. doi: https://doi.org/10.1115/1.2831072

Abstract

View articletitled, Modeling and Calibration of a Structured-light Optical CMM via Skewed Frame Representation

Open the PDF for in another window

Topics: Calibration , Coordinate measuring machines , Modeling , Deformation , Sensors

A New Method to Leak Test Piping Joints

R. A. Jensen, A. M. Agnone

J. Manuf. Sci. Eng. November 1996, 118(4): 604–609. doi: https://doi.org/10.1115/1.2831073

Abstract

View articletitled, A New Method to Leak Test Piping Joints

Open the PDF for in another window

Topics: Leakage , Pipe joints , Pipes , Bubbles , Metals , Natural gas , Plastic pipes , Polyethylene pipes , Pressure , Public utilities

Thermal Evaluation of a Dry Nonrotating Thin Section Contact Bearing

E. W. Spence, D. A. Kaminski

J. Manuf. Sci. Eng. November 1996, 118(4): 610–614. doi: https://doi.org/10.1115/1.2831074

Abstract

View articletitled, Thermal Evaluation of a Dry Nonrotating Thin Section Contact Bearing

Open the PDF for in another window

Topics: Bearings , Thermal resistance , Ball bearings , Stress , Stress analysis (Engineering)

Nesting of Complex 2-D Parts Within Irregular Boundaries

H. J. Lamousin, W. N. Waggenspack, Jr., G. T. Dobson

J. Manuf. Sci. Eng. November 1996, 118(4): 615–622. doi: https://doi.org/10.1115/1.2831075

Abstract

View articletitled, Nesting of Complex 2-D Parts Within Irregular Boundaries

Open the PDF for in another window

Topics: Algorithms , Hull , Offshore platforms , Shipbuilding

Effects of Welding Conditions on Molten Drop Geometry in Arc Welding

Tong M. Joo, Choong D. Yoo, Tae S. Lee

J. Manuf. Sci. Eng. November 1996, 118(4): 623–627. doi: https://doi.org/10.1115/1.2831076

Abstract

View articletitled, Effects of Welding Conditions on Molten Drop Geometry in Arc Welding

Open the PDF for in another window

Topics: Arc welding , Geometry , Welding , Electrodes , Electromagnetic force , Equilibrium (Physics) , Gravity (Force) , Materials properties , Metals , Robustness

Heating Effects in the Drawing of Wire and Strip Under Hydrodynamic Lubrication Conditions

D. A. Lucca, R. N. Wright

J. Manuf. Sci. Eng. November 1996, 118(4): 628–638. doi: https://doi.org/10.1115/1.2831078

Abstract

View articletitled, Heating Effects in the Drawing of Wire and Strip Under Hydrodynamic Lubrication Conditions

Open the PDF for in another window

Topics: Heating , Lubrication , Strips , Wire , Lubricants , Temperature , Convection , Aluminum , Deformation , Heat

Rapid Polymer/Gas Solution Formation for Continuous Production of Microcellular Plastics

C. B. Park, N. P. Suh

J. Manuf. Sci. Eng. November 1996, 118(4): 639–645. doi: https://doi.org/10.1115/1.2831079

Abstract

View articletitled, Rapid Polymer/Gas Solution Formation for Continuous Production of Microcellular Plastics

Open the PDF for in another window

Topics: Plastics , Polymers , Heating , Bubbles , Cycles , Diffusion (Physics) , Extruding , High pressure (Physics) , Nucleation (Physics)

A New Measuring Strategy for Sculptured Surfaces Using Offset Surfaces

K. I. Kim, K. Kim

J. Manuf. Sci. Eng. November 1996, 118(4): 646–651. doi: https://doi.org/10.1115/1.2831080

Abstract

View articletitled, A New Measuring Strategy for Sculptured Surfaces Using Offset Surfaces

Open the PDF for in another window

Topics: Algorithms , Computer-aided design , Errors , Inspection , Probes

A Multivariate Statistical Approach to Metrology

T. R. Kurfess, D. L Banks, L. J. Wolfson

J. Manuf. Sci. Eng. November 1996, 118(4): 652–657. doi: https://doi.org/10.1115/1.2831081

Abstract

View articletitled, A Multivariate Statistical Approach to Metrology

Open the PDF for in another window

Topics: Metrology , Geometry , Manufacturing

Adaptive Tool Replacement Policies in Machining Economics

E. Iakovou, C. M. Ip, C. Koulamas

J. Manuf. Sci. Eng. November 1996, 118(4): 658–663. doi: https://doi.org/10.1115/1.2831082

Abstract

View articletitled, Adaptive Tool Replacement Policies in Machining Economics

Open the PDF for in another window

Topics: Economics , Machining , Cutting , Optimization , Adaptive control , Decision making , Failure , Regression models

Technical Briefs

Monitoring Rotating Tools Using Laser Diffraction

Y. Fan, R. Du

J. Manuf. Sci. Eng. November 1996, 118(4): 664–667. doi: https://doi.org/10.1115/1.2831083

Abstract

View articletitled, Monitoring Rotating Tools Using Laser Diffraction

Open the PDF for in another window

Topics: Diffraction , Lasers , Cutting , Milling , Resolution (Optics) , Wear , Blades , Diffraction patterns , Drilling , Laser beams

A Numerical Study on the Heating of a Cast Iron Slab in a Car-Hearth Furnace

Miroslav Jicha, John C. Chai, Suhas V. Patankar

J. Manuf. Sci. Eng. November 1996, 118(4): 667–671. doi: https://doi.org/10.1115/1.2831084

Abstract

View articletitled, A Numerical Study on the Heating of a Cast Iron Slab in a Car-Hearth Furnace

Open the PDF for in another window

Topics: Cast iron , Furnaces , Hearths , Heating , Slabs , Jets , Temperature , Energy consumption , Temperature distribution , Transient heat transfer

Analysis of Drill Failure Modes by Multi-sensors on a Robotic End Effector

Shane Y. Hong, J. Ni, S. M. Wu

J. Manuf. Sci. Eng. November 1996, 118(4): 672–676. doi: https://doi.org/10.1115/1.2831085

Abstract

View articletitled, Analysis of Drill Failure Modes by Multi-sensors on a Robotic End Effector

Open the PDF for in another window

Topics: Drills (Tools) , End effectors , Failure mechanisms , Sensors , Thrust , Torque , Vibration

Free Surface Modeling of a Glass Tube Sealing Process

H. P. Wang, Y. F. Zhang

J. Manuf. Sci. Eng. November 1996, 118(4): 676–677. doi: https://doi.org/10.1115/1.2831086

View articletitled, Free Surface Modeling of a Glass Tube Sealing Process

Open the PDF for in another window

Topics: Glass , Modeling , Sealing (Process)

A Study on Fractal Characteristics of ARMA Model

M. Hasegawa, J. C. Liu, K. Okuda, M. Nunobiki

J. Manuf. Sci. Eng. November 1996, 118(4): 677–680. doi: https://doi.org/10.1115/1.2831087

Abstract

View articletitled, A Study on Fractal Characteristics of ARMA Model

Open the PDF for in another window

Topics: Dimensions , Fractals , Regression analysis

Research Papers

A Flexible Ball-End Milling System Model for Cutting Force and Machining Error Prediction

Thermo-Viscoplastic Modeling of Machining Process Using a Mixed Finite Element Method

Determination of Surface Residual Stresses in Machined Ceramics Using Indentation Fracture

Study of Electrochemical Jet Machining Process

Active Thermal Preload Regulation for Machine Tool Spindles With Rolling Element Bearings

Modular CNC Design for Intelligent Machining, Part 1: Design of a Hierarchical Motion Control Module for CNC Machine Tools

Modular CNC Design for Intelligent Machining, Part 2: Modular Integration of Sensor Based Milling Process Monitoring and Control Tasks

Fuzzy Adaptive Control of Machining Processes With a Self-Learning Algorithm

Accurate Robot Motion-Time Model of Start/Stop Point-to-Point Operations

A Digraphic Approach for Dimensional Chain Identification in Design and Manufacturing

An Evaluation of Chip Separation Criteria for the FEM Simulation of Machining

Monitoring of Thermal Energy Distribution in Abrasive Waterjet Cutting Using Infrared Thermography

A Theoretical Study of Erosion Phenomenon in Abrasive Jet Machining

Distributed-Parameter Control of the Heat Source Trajectory in Thermal Materials Processing

Central Bursting and Optimal Die Profile for Axisymmetric Extrusion

An Innovative Approach to Increase the Accuracy of Multi-Axis Machines for Process-Intermittent Inspection

Modeling and Calibration of a Structured-light Optical CMM via Skewed Frame Representation

A New Method to Leak Test Piping Joints

Thermal Evaluation of a Dry Nonrotating Thin Section Contact Bearing

Nesting of Complex 2-D Parts Within Irregular Boundaries

Effects of Welding Conditions on Molten Drop Geometry in Arc Welding

Heating Effects in the Drawing of Wire and Strip Under Hydrodynamic Lubrication Conditions

Rapid Polymer/Gas Solution Formation for Continuous Production of Microcellular Plastics

A New Measuring Strategy for Sculptured Surfaces Using Offset Surfaces

A Multivariate Statistical Approach to Metrology

Adaptive Tool Replacement Policies in Machining Economics

Technical Briefs

Monitoring Rotating Tools Using Laser Diffraction

A Numerical Study on the Heating of a Cast Iron Slab in a Car-Hearth Furnace

Analysis of Drill Failure Modes by Multi-sensors on a Robotic End Effector

Free Surface Modeling of a Glass Tube Sealing Process

A Study on Fractal Characteristics of ARMA Model

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Technical Briefs

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only