...Selis Önel; Gözde Ergin During electrochemical machining (ECM) of metals, the electrolyte gets polluted by heavy metal ions and compounds. This creates crucial process control problems due to variation in electrical conductivity and is an environmental threat if the solution is discharged without...

...) ultrasonic vibration cutting will lead to less brittle fracture generated on machined brittle surface of tungsten carbide (WC). Due to electrochemical reaction cannot form thick oxide (low than 1  μ m), most of researches on ultrasonic-assisted electrochemical machining has ever focused mainly...

...Curtis Bradley; Johnson Samuel This paper presents the design of a novel testbed that effectively combines pulsed electric field waveforms, ultrasonic velocity, and magnetic field waveforms in an anodic dissolution electrochemical machining (ECM) cell. The testbed consists of a custom three...

... April 30, 2017; final manuscript received August 8, 2017; published online December 18, 2017. Assoc. Editor: Tony Schmitz. 30 04 2017 08 08 2017 Materials processing Electrical machining Metrology Micro-machining Precision machining Electrochemical machining Processing Nano...

... Nontraditional manufacturing processes Electrochemical machining Electrical discharge texturing (EDT) follows the principle of spark erosion and generates surfaces with randomly distributed textures which find a number of applications. The earliest application of EDT was in the field of texturing...

... received September 24, 2016; final manuscript received July 28, 2017; published online September 13, 2017. Assoc. Editor: Y. B. Guo. 24 09 2016 28 07 2017 CAD Electrical machining Nontraditional manufacturing processes CAM CAE Electrochemical machining Shrouded blisks...

... received June 9, 2017; published online July 17, 2017. Assoc. Editor: Y. B. Guo. 02 03 2017 09 06 2017 Electrical machining Machining processes Micro-machining Sensing Monitoring Electrochemical machining Processing Nano-machining Diagnostics Micro-EDM processes...

... materials in the deformation process. Materials processing Electrical machining Materials handling Sheet metal forming Electrochemical machining Tube metal forming 12 03 2016 29 05 2016 Manuscript received March 12, 2016; final manuscript received May 29, 2016; published...

... Electrochemical machining Diagnostics 26 04 2015 19 04 2016 Manuscript received April 26, 2015; final manuscript received April 19, 2016; published online May 20, 2016. Assoc. Editor: Yong Huang. 1 Corresponding author. Copyright © 2016 by ASME 2016 1087-1357/2016/138(8)/081011...

... there is no phase transformation and plastic deformation of surface as normally occurs in other processes [ 31 , 32 ], the generated surface is free from residual stresses and white layer. Electrical machining Electrochemical machining 16 08 2015 30 10 2015 Manuscript received August...

... manuscript received November 24, 2015; published online January 6, 2016. Assoc. Editor: Brad L. Kinsey. 11 04 2015 24 11 2015 Electrical machining Electrochemical machining The EAF technologies have been widely utilized in microfeatures fabrication [ 1 ], spring-back elimination...

... of experimental craters show good agreement with the simulated crater shapes. However, the model over-predicts the crater depths compared to the experiments. Electrical machining Micro-machining Modeling and simulation Nontraditional manufacturing processes Electrochemical machining Processing Nano...

... stress prediction was developed and found to have good agreement with the experimental findings. Materials processing Electrical machining Machining processes Nontraditional manufacturing processes Electrochemical machining In fabricating PCD tools, a PCD chip is cut from larger PCD...

.... Finite element simulation of the electrochemical machining tool design has been reported in literature, where the tool design for this noncontact process is predicted by the simulations [ 22 ]. Finite element simulation of the electrodeposition has been studied for the localized electrochemical process...

... electrochemical machining electrolytes microfabrication micromachining resins bipolar current pulsed microelectrochemical machining micromachining adhesion cathode coating Microelectrochemical machining (ECM) is a well known method for the fabrication of microparts, micropatterns...

... micro-ECG process, and specific experimentation in the case of cylindrical micro-ECG process. 09 04 2006 10 01 2008 06 05 2008 abrasives computational fluid dynamics dissolving electrochemical machining electrolytes grinding grinding machines micromachining wheels...

... 2006 precision engineering grinding brittleness hardness electrochemical machining grinding machines ELID nanogrinding grinding model superabrasive wheels The demand for nanosurface finish has been increasing in the recent optical, electrical, and electronics industries...

... simulation grinding electrolytes elastic deformation electrochemical machining laminar flow surface tension Metal-bonded super-abrasive wheels (e.g., cast-iron bonded diamond grinding wheels) play an important role in realizing highly efficient and accurate grinding of extremely hard materials...