...-Input on Tensile Strength and Fracture Location in Upset Resistance Weld of Martensitic Stainless Steel to Duplex Stainless Steel Rods ,” J. Manuf. Processes , 35 ( 1 ), pp. 517 – 525 . 10.1016/j.jmapro.2018.08.039 [2] Kerstens , N. F. H. , 2009 , Investigation and Control of Factors...

... used to join porcine arterial tissues while the process parameters including voltage, current, and impedance were monitored. Tensile tests were performed to evaluate the quality of tissue joints. A new index, the strength-energy coefficient (mmHg/J), which is defined as the tensile strength divided...

...-hardened stainless steels. In the present study, effect of different heat treatment processes, namely solution annealing, aging, and overaging, on tensile strength, hardness, and wear properties has been studied in detail. Suitable metallurgical and mechanical characterization techniques have been applied...

... a perfect joint. However, solid state diffusion of the melting point depressant elements into the joint metal causes the solid/liquid interface to advance until the joint is solidified. The tensile strength values of all bonded specimens were found around 480–670 MPa. Energy dispersive spectroscopy studies...

... of the wedge device as a means of preventing sheet buckling during compression tests, experiments were conducted using miniature tensile specimens of 127  μ m thick 260 series brass. Specimens are first loaded in tension prior to reaching their ultimate tensile strength, and then reverse-loaded until either...

... aluminium alloys annealing deformation electron backscattering electron diffraction forming processes recrystallisation rolling sheet metal processing surface texture tensile strength tensile properties anisotropy forming limit diagrams prestrain annealing Aluminum alloys...

... distribution 28 10 2010 16 07 2011 12 10 2011 12 10 2011 deformation finite element analysis forming processes sheet materials tensile strength tensile testing aluminum AA5754 lightweight warm hydroforming formability Implementation of mass reduction...

... of high tensile strength alloys such as stainless steel 321, Inconel 625, and Ti–3Al–2.5V. The proposed forming technology is based on the utilization of high pressure developed in liquid flowing through a tubular work piece. This pressure results from superposition of compression waves generated...

... into the effects of the electric field. aluminium alloys aluminium manufacture elastic deformation electric current electric heating finite element analysis plasticity stress-strain relations tensile strength tensile testing Due to the limited formability, complex metallic parts are frequently...

... frequency cyclic load. For comparison with the FSBR joints, the same three maximum load levels are chosen (3 kN, 2 kN, and 1 kN)—again each of these loads is less than the ultimate tensile strength of the joints prepared. The same load ratio of 0.1 was used, and again, three experiments were conducted...

... glass crack propagation thermal stress finite elements method compressive strength crack detection crack-edge stress field analysis finite element analysis glass glass manufacture laser beam applications separation tensile strength thermoelasticity 19 09 2008 24 07 2009...

... tensile strength turning (machining) wear X-ray diffraction residual stress hard turning grinding white layer Hard turning has become competitive with grinding for the production of many components such as bearings, gears, cams, etc. The selection of a suitable machining method may...

... of welding temperature on thickness reduction and bond strength 04 03 2008 27 01 2009 07 07 2009 copper nickel plates (structures) sheet materials stainless steel tensile strength tensile testing welding pressure welding cold welding solid state welding...

... technology and to reduce the weight of defense systems primarily because of their low density, high specific modulus, and excellent fatigue and cryogenic toughness properties. Al-to-Al–Li welding electromagnetic impact tensile strength aluminium alloys fusion welding heat treatment...

... to pure magnesium, the mechanical properties including tensile strength and yield strength of the Mg ∕ Si C nanocomposites were improved significantly, while the good ductility of pure Mg was retained. The grain size of the pure magnesium was refined significantly when SiC nanoparticles were dispersed...

..., Audi A8 has about 500 spot welds and 1100 self-piercing rivets, and about 1500 self-piercing rivets have totally replaced spot welds on the latest aluminum Audi AL2 ( 1 ). riveting automobile industry impact (mechanical) fatigue spot welding tensile strength 12 11 2004 27 04...

... in the JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING . Manuscript received July 9, 2003; revised May 5, 2004. Associate Editor: S. R. Schmid. 09 July 2003 05 May 2004 25 04 2005 polymer blends recycling injection moulding plastics tensile strength plastics industry...

... the results of stress analysis. cutting stress analysis finite element analysis laser beam applications gas lasers crack detection machining internal stresses tensile strength One use of lasers is to scribe grooves along which brittle materials can be separated, as originally proposed...

... constraining washers Mechanical Testing : In order to understand the cracking behavior of this aluminum alloy, tests of the ultimate tensile strength (UTS) and ductility at temperatures from RT up to the solidus temperature were conducted using an INSTRON tensile testing machine equipped...

... July 1998; revised Dec. 1999. Associate Editor: S. G. Kapoor. 01 July 1998 01 Dec 1999 laser beam applications tensile strength manufacturing processes powders melting stainless steel Metal powder-based laser rapid manufacturing and materials processing techniques have...