Mechanical degradation in fibrous composite electrodes in use in NiMH(nickel metal hydride) batteries is being studied. NiMH cells exhibit failure in the positive plate due to swelling induced during the electrochemical reaction, which leads to gradual breakdown of the connectivity of the substrate microstructure. Particularly, loss of electrical conductivity as related to losses in mechanical properties upon cell cycling (constant current cycles with substantial overcharge) are being investigated experimentally. These properties are measured for the dry substrate material before and after battery cycling, and the losses observed suggest key tradeoffs between use of higher density nickel substrates and improved energy densities using mechanical and resistivity proof tests.

1.
Davolio, G., Da Pieve, A., and Soragni, E., 1990, “On the Mechanical Properties of Nickel Oxide Electrodes,” Proceedings of the Symposium on Nickel Hydroxide Electrodes, Hollywood, FL.
2.
Ettel, V. A., 1994, “Improving the Pasted Nickel Electrode,” Proceedings, The Eleventh International Seminar on Primary and Secondary Battery Technology.
3.
Ettel, V. A., Jan., 1993, “Inco’s R&D Support for Ni-Based Cells,” Batteries International, pp. 32–36.
4.
Fritts
D. H.
,
1981
, “
Testing the Mechanical Characteristics of Sintered Nickel Battery Plaque and Their Relationship to Nickel Electrode Performance
,”
Journal of Power Sources
, Vol.
6
, pp.
171
184
.
5.
Oshitani
M.
,
Takayama
T.
,
Takashima
K.
, and
Tsuji
S.
,
1986
, “
A Study on the Swelling of Sintered Nickel Hydroxide Electrode
,”
Journal of Applied Electrochemistry
, Vol.
16
, pp.
403
412
.
6.
Sastry, A. M., Cheng, X., and Choi, S. B., 1997, “Transport in Fibrous Battery Electrode Substrates,” Proceedings of the 1997 International Mechanical Engineering Congress & Exposition, Nov. 16-21, Dallas, TX, MD80, pp. 331–338.
7.
Sastry
A. M.
,
Cheng
X.
, and
Wang
C.
,
1998
, “
Mechanics of Stochastic Fibrous Networks
,”
Journal of Thermoplastic Composite Materials
, Vol.
11
. pp.
288
296
.
8.
Sastry, A. M., 1994, “Modeling Conductivity of Composite Substrates for Nickel-Metal Hydride Batteries,” Sandia Report SAND94-2884.
9.
USABC, 1996, “USABC Electric Vehicle Battery Test Procedures Manual, Revision 2,” principal author: Gary Hunt, Idaho National Engineering Laboratory (INEL), U.S. Department of Energy Idaho Field Office, DOE/ID-10479, Rev. 2.
This content is only available via PDF.
You do not currently have access to this content.