Skip Nav Destination
Issues
April 2003
ISSN 0094-4289
EISSN 1528-8889
In this Issue
Editorial
J. Eng. Mater. Technol. April 2003, 125(2): 89.
doi: https://doi.org/10.1115/1.1562954
Topics:
Materials science
Technical Papers
Investigation of Nanomechanical Properties of the Interphase in a Glass Fiber Reinforced Polyester Composite Using Nanoindentation
J. Eng. Mater. Technol. April 2003, 125(2): 90–96.
doi: https://doi.org/10.1115/1.1543966
Modeling of Fatigue Crack Propagation During Sliding Wear of Polymers
J. Eng. Mater. Technol. April 2003, 125(2): 97–106.
doi: https://doi.org/10.1115/1.1543967
Topics:
Fracture (Materials)
,
Modeling
,
Polymers
,
Stress
,
Wear
,
Fatigue cracks
,
Crack propagation
,
Cylinders
,
Finite element analysis
,
Cycles
On the Improvement of Calibration Coefficients for Hole-Drilling Integral Method: Part II—Experimental Validation of Calibration Coefficients
J. Eng. Mater. Technol. April 2003, 125(2): 107–115.
doi: https://doi.org/10.1115/1.1543972
Topics:
Calibration
,
Drilling
,
Stress
,
Probability
,
Errors
,
Three-dimensional models
Simulating Distortion and Residual Stresses in Carburized Thin Strips
J. Eng. Mater. Technol. April 2003, 125(2): 116–124.
doi: https://doi.org/10.1115/1.1543973
Topics:
Carbon
,
Phase transitions
,
Plasticity
,
Residual stresses
,
Stress
,
Strips
,
Temperature
,
Simulation
,
Deformation
,
Carburization
Ultimate Strength and Failure Mechanism of Resistance Spot Weld Subjected to Tensile, Shear, or Combined Tensile/Shear Loads
J. Eng. Mater. Technol. April 2003, 125(2): 125–132.
doi: https://doi.org/10.1115/1.1555648
Topics:
Failure
,
Shear (Mechanics)
,
Stress
,
Tension
,
Tensile strength
,
Failure mechanisms
,
Welding
Analysis of Tube Free Hydroforming Using an Inverse Approach With FLD-Based Adjustment of Process Parameters
J. Eng. Mater. Technol. April 2003, 125(2): 133–140.
doi: https://doi.org/10.1115/1.1555651
Topics:
Deformation
,
Finite element analysis
,
Pressure
,
Forming limit diagrams
,
Membranes
Experimental Implementation of Neural Network Springback Control for Sheet Metal Forming
J. Eng. Mater. Technol. April 2003, 125(2): 141–147.
doi: https://doi.org/10.1115/1.1555652
Optimization of Directionally Attached Piezoelectric Actuators
J. Eng. Mater. Technol. April 2003, 125(2): 148–152.
doi: https://doi.org/10.1115/1.1555653
Topics:
Actuators
,
Composite materials
,
Optimization
,
Piezoelectric actuators
,
Materials properties
,
Vibration
Measurement of In-Plane Residual Stresses Varying With Depth by the Interferometric Strain/Slope Rosette and Incremental Hole-Drilling
J. Eng. Mater. Technol. April 2003, 125(2): 153–162.
doi: https://doi.org/10.1115/1.1555654
Topics:
Drilling
,
Residual stresses
,
Stress
,
Titanium alloys
,
Relaxation (Physics)
Surface Enhancement of Fiber With Nanosized Particles Using A Dry Mechanical Coating Process
Nowarat Coowanitwong, Chang-Yu Wu, Judy Nguyen, Mei Cai, Martin Ruthkosky, Jerry Rogers, Lee Feng, Satoru Watano, Taizo Yoshida
J. Eng. Mater. Technol. April 2003, 125(2): 163–169.
doi: https://doi.org/10.1115/1.1555655
Topics:
Coating processes
,
Fibers
,
Nanoparticles
,
Particulate matter
,
Coatings
,
Durability
An Approximate Method of Estimating the Yield of a Strip Under Tension Cut by Serrated Surfaces on Opposite Faces
J. Eng. Mater. Technol. April 2003, 125(2): 170–175.
doi: https://doi.org/10.1115/1.1555656
Determination of Interface Fracture Toughness in Thermal Barrier Coating System by Blister Tests
J. Eng. Mater. Technol. April 2003, 125(2): 176–182.
doi: https://doi.org/10.1115/1.1555658
Topics:
Coating processes
,
Coatings
,
Fracture (Materials)
,
Fracture toughness
,
Stress
,
Thermal barrier coatings
,
Testing
,
Pressure
,
Stainless steel
,
Deflection
A Closure Model to Crack Growth Under Large-Scale Yielding and Through Residual Stress Fields
J. Eng. Mater. Technol. April 2003, 125(2): 183–190.
doi: https://doi.org/10.1115/1.1493804
Topics:
Fracture (Materials)
,
Stress
,
Fatigue cracks
,
Plasticity
Constitutive Modeling of Cold Compaction and Sintering of Hardmetal
J. Eng. Mater. Technol. April 2003, 125(2): 191–199.
doi: https://doi.org/10.1115/1.1491576
Topics:
Compacting
,
Sintering
,
Stress
,
Modeling
,
Temperature
Implementation of a Viscoplastic Model for a Plasma Sprayed Ceramic Thermal Barrier Coating
J. Eng. Mater. Technol. April 2003, 125(2): 200–207.
doi: https://doi.org/10.1115/1.1562952
New Estimation Method of Fatigue Properties of Aluminum Alloys
J. Eng. Mater. Technol. April 2003, 125(2): 208–214.
doi: https://doi.org/10.1115/1.1562953
Topics:
Aluminum alloys
,
Fatigue
,
Fatigue properties
,
Ductility
Plastic Collapse of Cylinders Under Constrained Conditions
J. Eng. Mater. Technol. April 2003, 125(2): 215–221.
doi: https://doi.org/10.1115/1.1543970
Topics:
Collapse
,
Cylinders
,
Deflection
,
Deformation
,
Finite element analysis
,
Stress
,
Superplasticity
,
Simulation
,
Flow (Dynamics)
Numerical Simulation of Residual Stresses in a Spot Welded Joint
J. Eng. Mater. Technol. April 2003, 125(2): 222–226.
doi: https://doi.org/10.1115/1.1543968
Topics:
Boundary-value problems
,
Computer simulation
,
Cycles
,
Residual stresses
,
Stress
,
Stress concentration
,
Temperature
,
Welded joints
,
Welding
,
Shapes
Dynamic Fracture Toughness and Charpy Transition Properties of a Service-Exposed 2.25Cr-1Mo Reheater Header Pipe
P. R. Sreenivasan, C. G. Shastry, M. D. Mathew, K. Bhanu Sankara Rao, S. L. Mannan, G. Bandyopadhyay
J. Eng. Mater. Technol. April 2003, 125(2): 227–233.
doi: https://doi.org/10.1115/1.1543969
Topics:
Fracture (Materials)
,
Fracture toughness
,
Steel
,
Stress
,
Temperature
,
Phase transition temperature
,
Pipes
,
Impact testing
,
Fracture (Process)
Email alerts
RSS Feeds
Investigations on Formability Enhancement of Friction Stir Tailor Welded Blanks
J. Eng. Mater. Technol
Blast Mitigation Using Monolithic Closed-Cell Aluminum Foam
J. Eng. Mater. Technol (April 2025)
Irradiation Damage Evolution Dependence on Misorientation Angle for Σ 5 Grain Boundary of Nb: An Atomistic Simulation-Based Study
J. Eng. Mater. Technol (July 2025)