Skip Nav Destination
Issues
October 2003
ISSN 0094-4289
EISSN 1528-8889
In this Issue
Foreword
Special Issue on Durability and Damage Tolerance of Heterogeneous Materials and Structures
J. Eng. Mater. Technol. October 2003, 125(4): 345.
doi: https://doi.org/10.1115/1.1605772
Topics:
Aluminum
,
Damage
,
Durability
,
Fracture toughness
,
Laminates
,
Optimization
,
Powder metallurgy
,
Carbon reinforced plastics
,
Failure
,
Fracture mechanics
Technical Papers
On the Mechanical Response in a Thermal Barrier System Due to Martensitic Phase Transformation in the Bond Coat
J. Eng. Mater. Technol. October 2003, 125(4): 346–352.
doi: https://doi.org/10.1115/1.1605107
Assessment of the Fracture Behavior of an Asymmetrically Loaded Cantilever Composite Structure
J. Eng. Mater. Technol. October 2003, 125(4): 353–360.
doi: https://doi.org/10.1115/1.1605108
Topics:
Cantilevers
,
Composite materials
,
Delamination
,
Fracture (Materials)
,
Stress
,
Cantilever beams
,
Buckling
,
Finite element model
,
Simulation
Nanoindentation Measurements on Low-k Porous Silica Thin Films Spin Coated on Silicon Substrates
J. Eng. Mater. Technol. October 2003, 125(4): 361–367.
doi: https://doi.org/10.1115/1.1605109
Topics:
Displacement
,
Nanoindentation
,
Particle spin
,
Rotation
,
Silicon
,
Spin (Aerodynamics)
,
Surface roughness
,
Thin films
,
Young's modulus
,
Mechanical properties
Spatial Impact of a Slender Beam
J. Eng. Mater. Technol. October 2003, 125(4): 368–371.
doi: https://doi.org/10.1115/1.1605110
Surface Modification of Powder Metallurgy Components With a Direct Diode Laser
J. Eng. Mater. Technol. October 2003, 125(4): 372–377.
doi: https://doi.org/10.1115/1.1605111
Topics:
Lasers
,
Hardening
,
Melting
,
Porosity
,
Laser hardening
,
Powder metallurgy
,
Electromagnetic induction
Effect of Laser Pre-Treatment on the Machining Performance of Aluminum/SiC MMC
J. Eng. Mater. Technol. October 2003, 125(4): 378–384.
doi: https://doi.org/10.1115/1.1605112
Control of Damage in Composite Laminates by Ply-Stacking Designs: Characteristic Failure Signatures and Safety Criteria
J. Eng. Mater. Technol. October 2003, 125(4): 385–393.
doi: https://doi.org/10.1115/1.1605771
Effects of Temperature and Moisture on the High Strain Rate Compression Response of Graphite/Epoxy Composites
J. Eng. Mater. Technol. October 2003, 125(4): 394–401.
doi: https://doi.org/10.1115/1.1605113
Topics:
Compression
,
Epoxy resins
,
Graphite
,
Stress
,
Temperature
,
Testing
,
Pressure
,
Laminates
,
Scanning electron microscopy
,
Failure
Evaluation Method for Fatigue Strength of FRP/Metal Adhesive Joints Considering Mean Stress
J. Eng. Mater. Technol. October 2003, 125(4): 402–405.
doi: https://doi.org/10.1115/1.1605114
Statistical Analysis of Experimental Parameters in Continuous Indentation Tests Using Taguchi Method
J. Eng. Mater. Technol. October 2003, 125(4): 406–411.
doi: https://doi.org/10.1115/1.1605115
Topics:
Stress
,
Taguchi methods
,
Tensile strength
,
Statistical analysis
The Effect of Graded Strength on Damage Propagation in Continuously Nonhomogeneous Materials
J. Eng. Mater. Technol. October 2003, 125(4): 412–417.
doi: https://doi.org/10.1115/1.1605116
Topics:
Damage
,
Finite element analysis
Spatially Averaged Local Strains in Textile Composites Via the Binary Model Formulation
J. Eng. Mater. Technol. October 2003, 125(4): 418–425.
doi: https://doi.org/10.1115/1.1605117
Topics:
Composite materials
,
Failure
,
Stress
,
Textiles
,
Fibers
,
Gages
,
Dimensions
,
Shear (Mechanics)
,
Fracture (Process)
Email alerts
RSS Feeds
A Multiaxial Fatigue Life Criterion Including the Mean Stress Effect Based on π-Plane Projection and Walker Equation
J. Eng. Mater. Technol (July 2025)
Forming Limits of Thin Ferritic Stainless Steel for Fuel Cell Application
J. Eng. Mater. Technol (July 2025)
Performance Enhancement of a Hole in a Plate Through Residual Stress Induced by Thermal Autofrettage
J. Eng. Mater. Technol (July 2025)
Impact of Derivative Cutting on Micro-Textured Tool Performance in CFRP Machining
J. Eng. Mater. Technol
Reviewer's Recognition
J. Eng. Mater. Technol (July 2025)
