Skip Nav Destination
Issues
April 2007
ISSN 0094-4289
EISSN 1528-8889
In this Issue
2006 NADAI Award Paper
A Comprehensive Theory of Yielding and Failure for Isotropic Materials
J. Eng. Mater. Technol. April 2007, 129(2): 173–181.
doi: https://doi.org/10.1115/1.2712847
Topics:
Brittleness
,
Failure
,
Stress
,
Deformation
Technical Papers
An Approach for Fatigue Life Prediction
J. Eng. Mater. Technol. April 2007, 129(2): 182–189.
doi: https://doi.org/10.1115/1.2400260
Topics:
Fatigue
,
Fatigue damage
,
Fatigue life
,
Fracture (Materials)
,
Stress
,
Stress analysis (Engineering)
,
Cycles
Fracture Characterization of Woven Fabric Reinforced Thermoplastic Composites
J. Eng. Mater. Technol. April 2007, 129(2): 190–193.
doi: https://doi.org/10.1115/1.2400277
Microwave Synthesis and Characterization of Magnesium Based Composites Containing Nanosized SiC and Hybrid Reinforcements
J. Eng. Mater. Technol. April 2007, 129(2): 194–199.
doi: https://doi.org/10.1115/1.2400279
Topics:
Composite materials
,
Magnesium (Metal)
,
Microwaves
,
Thermal expansion
,
Particulate matter
,
Porosity
,
Extruding
,
Sintering
,
Powder metallurgy
,
Ductility
Determining Equi-Biaxial Residual Stress and Mechanical Properties From the Force-Displacement Curves of Conical Microindentation
J. Eng. Mater. Technol. April 2007, 129(2): 200–206.
doi: https://doi.org/10.1115/1.2400280
Topics:
Finite element analysis
,
Stress
,
Yield strength
,
Mechanical properties
,
Displacement
,
Errors
,
Stiffness
,
Elastic moduli
Optimization of Thermomechanical Loading by the Inverse Method
J. Eng. Mater. Technol. April 2007, 129(2): 207–210.
doi: https://doi.org/10.1115/1.2400255
Topics:
Casting
,
Coating processes
,
Coatings
,
Cooling
,
Finite element analysis
,
Finite element methods
,
Optimization
,
Pyrometers
,
Quenching (Metalworking)
,
Rollers
Average Strain in Fiber Bundles and Its Effect on NCF Composite Stiffness
J. Eng. Mater. Technol. April 2007, 129(2): 211–219.
doi: https://doi.org/10.1115/1.2400266
Topics:
Composite materials
,
Stiffness
,
Fibers
Low-Velocity Impact Response Characterization of a Hybrid Titanium Composite Laminate
J. Eng. Mater. Technol. April 2007, 129(2): 220–226.
doi: https://doi.org/10.1115/1.2400272
Topics:
Buckling
,
Composite materials
,
Failure
,
Fracture (Materials)
,
Fracture (Process)
,
Laminates
,
Titanium
,
Failure mechanisms
,
Displacement
,
Brittleness
Residual Stress Solution Extrapolation for the Slitting Method Using Equilibrium Constraints
J. Eng. Mater. Technol. April 2007, 129(2): 227–232.
doi: https://doi.org/10.1115/1.2400281
Topics:
Equilibrium (Physics)
,
Stress
,
Residual stresses
Optimization of Material Properties and Process Parameters for Tube Hydroforming of Aluminum Extrusions
J. Eng. Mater. Technol. April 2007, 129(2): 233–241.
doi: https://doi.org/10.1115/1.2400259
Topics:
Ductility
,
Heat treating (Metalworking)
,
Optimization
,
Stress
,
Hardening
,
Aluminum alloys
,
Materials properties
,
Pressure
,
Heat
,
Aluminum extrusions
Capability of a Feed-Forward Artificial Neural Network to Predict the Constitutive Flow Behavior of As Cast 304 Stainless Steel Under Hot Deformation
J. Eng. Mater. Technol. April 2007, 129(2): 242–247.
doi: https://doi.org/10.1115/1.2400276
Topics:
Algorithms
,
Artificial neural networks
,
Deformation
,
Feedforward control
,
Flow (Dynamics)
,
Stainless steel
,
Stress
,
Temperature
Behavior of Nonhomogeneous Materials Subjected to Bearing Load
J. Eng. Mater. Technol. April 2007, 129(2): 248–254.
doi: https://doi.org/10.1115/1.2400278
Topics:
Stress
,
Finite element analysis
Pressure Sensitive Nonassociative Plasticity Model for DRA Composites
J. Eng. Mater. Technol. April 2007, 129(2): 255–264.
doi: https://doi.org/10.1115/1.2400273
Topics:
Algorithms
,
Composite materials
,
Flow (Dynamics)
,
Hardening
,
Plasticity
,
Pressure
,
Stiffness
,
Stress
,
Tensors
,
Compression
Weld Distortion Control During Welding Process With Reverse-Side Heating
J. Eng. Mater. Technol. April 2007, 129(2): 265–270.
doi: https://doi.org/10.1115/1.2400275
Topics:
Heating
,
Welding
,
Heat
,
Gas metal arc welding
,
Welded joints
,
Finite element analysis
Development and Validation of Novel FE Models for 3D Analysis of Peening of Strain-Rate Sensitive Materials
J. Eng. Mater. Technol. April 2007, 129(2): 271–283.
doi: https://doi.org/10.1115/1.2712469
Topics:
Finite element analysis
,
Finite element model
,
Residual stresses
,
Shot peening
,
Stress
,
Drilling
,
Modeling
A New Method Developed for Brittle and Ductile Materials to Evaluate Mechanical Properties of a Lump Specimen in the Use of Indentation Test
J. Eng. Mater. Technol. April 2007, 129(2): 284–292.
doi: https://doi.org/10.1115/1.2712465
Topics:
Brittleness
,
Deformation
,
Mechanical properties
,
Stress
,
Yield strength
,
Young's modulus
A Mathematical Model for Competing Failure Modes in Strain Cycle Fatigue
J. Eng. Mater. Technol. April 2007, 129(2): 293–303.
doi: https://doi.org/10.1115/1.2712468
Effects of Platelet Size and Mean Volume Fraction on Platelet Orientation and Volume Fraction Distributions in Functionally Graded Material Fabricated by a Centrifugal Solid-Particle Method
J. Eng. Mater. Technol. April 2007, 129(2): 304–312.
doi: https://doi.org/10.1115/1.2712467
Topics:
Functionally graded materials
,
Particulate matter
,
Platelets
Four Phase Model: A New Formulation to Predict the Effective Elastic Moduli of Composites
J. Eng. Mater. Technol. April 2007, 129(2): 313–320.
doi: https://doi.org/10.1115/1.2712472
Topics:
Composite materials
,
Elastic moduli
,
Tensors
,
Elasticity
Evidence of Ductile Tearing Ahead of the Cutting Tool and Modeling the Energy Consumed in Material Separation in Micro-Cutting
J. Eng. Mater. Technol. April 2007, 129(2): 321–331.
doi: https://doi.org/10.1115/1.2712471
Topics:
Cutting
,
Cutting tools
,
Ductile fracture
,
Separation (Technology)
,
Stress
,
Damage
,
Copper
,
Fracture (Materials)
,
Computer simulation
,
Finite element model
On Serrated Plastic Flow in an AA5052-H32 Sheet
J. Eng. Mater. Technol. April 2007, 129(2): 332–341.
doi: https://doi.org/10.1115/1.2712466
Topics:
Deformation
,
Polishing
,
Stress
,
Nucleation (Physics)
,
Flow (Dynamics)
,
Machinery
,
Relaxation (Physics)
Technical Brief
Manufacturing Aspects Relating to the Effects of Direct Current on the Tensile Properties of Metals
J. Eng. Mater. Technol. April 2007, 129(2): 342–347.
doi: https://doi.org/10.1115/1.2712470
Topics:
Aluminum
,
Brass (Metal)
,
Elastic moduli
,
Metals
,
Stress
,
Deformation
,
Manufacturing
,
Tensile strength
,
Temperature
,
Flow (Dynamics)
Email alerts
RSS Feeds
Evaluation of Machine Learning Models for Predicting the Hot Deformation Flow Stress of Sintered Al–Zn–Mg Alloy
J. Eng. Mater. Technol (April 2025)
Blast Mitigation Using Monolithic Closed-Cell Aluminum Foam
J. Eng. Mater. Technol (April 2025)
Irradiation Damage Evolution Dependence on Misorientation Angle for Σ 5 Grain Boundary of Nb: An Atomistic Simulation-Based Study
J. Eng. Mater. Technol (July 2025)
Influence of Ultrasonic Surface Rolling on the Tensile and Fatigue Properties of Laser-Cladding-Repaired 300M Steel Components
J. Eng. Mater. Technol (April 2025)