Topics: Deformation , Finite element analysis , Flow (Dynamics) , Pressing , Shapes , Shear (Mechanics) , Texture (Materials) , Engineering simulation , Simulation

Stress Whitening Quantification of Thermoformed Mineral Filled Acrylics

E. M. Gunel, C. Basaran

J. Eng. Mater. Technol. July 2010, 132(3): 031002. doi: https://doi.org/10.1115/1.4001262

Abstract

View articletitled, Stress Whitening Quantification of Thermoformed Mineral Filled Acrylics

Open the PDF for in another window

Topics: Deformation , Stress , Temperature , Cycles , Particulate matter

${Al}_{2} O_{3}$ Graded Coatings on Aluminum Alloy Deposited by the Fluidized Bed (FB) Technique: Film Formation and Mechanical Performance

M. Barletta

J. Eng. Mater. Technol. July 2010, 132(3): 031003. doi: https://doi.org/10.1115/1.4001263

Abstract

View articletitled, <span class="inline-formula no-formula-id"><span class="mathFormula"></span><math xmlns="http://www.w3.org/1998/Math/MathML"><mrow xmlns=""><msub><mrow><mtext>Al</mtext></mrow><mn>2</mn></msub><msub><mtext>O</mtext><mn>3</mn></msub></mrow></math></span> Graded Coatings on Aluminum Alloy Deposited by the Fluidized Bed (FB) Technique: Film Formation and Mechanical Performance

Open the PDF for in another window

Topics: Aluminum , Coatings , Stress , Aluminum alloys , Fluidized beds

Experimental and Numerical Determination of Limiting Drawing Ratio of Al3105-Polypropylene-Al3105 Sandwich Sheets

M. H. Parsa, M. Ettehad, P. H. Matin, S. Nasher Al Ahkami

J. Eng. Mater. Technol. July 2010, 132(3): 031004. doi: https://doi.org/10.1115/1.4001264

Abstract

View articletitled, Experimental and Numerical Determination of Limiting Drawing Ratio of Al3105-Polypropylene-Al3105 Sandwich Sheets

Open the PDF for in another window

Topics: Aluminum , Damage , Polymers , Stress , Fracture (Materials) , Simulation , Finite element analysis , Deformation , Sandwich structures

Fatigue Behavior of Single Crystal Superalloy Bars Joined by Capacitor Discharge Welding

S. Chiozzi, V. Dattoma, F. Panella

J. Eng. Mater. Technol. July 2010, 132(3): 031005. doi: https://doi.org/10.1115/1.4001301

Abstract

View articletitled, Fatigue Behavior of Single Crystal Superalloy Bars Joined by Capacitor Discharge Welding

Open the PDF for in another window

Topics: Capacitors , Crystals , Fatigue , Superalloys , Welding , Temperature , Charge density waves , Mechanical testing , Metals

Identification of Process Parameters for Friction Stir Welding Ti–6Al–4V

P. Edwards, M. Ramulu

J. Eng. Mater. Technol. July 2010, 132(3): 031006. doi: https://doi.org/10.1115/1.4001302

Abstract

View articletitled, Identification of Process Parameters for Friction Stir Welding Ti–6Al–4V

Open the PDF for in another window

Topics: Fatigue , Friction , Titanium , Welded joints , Welding , Temperature , Tensile testing , Failure , Grain size , Heat

Local Delamination Buckling of a Laminated Beam due to Three-Point Bending

M. Toya, K. Fukagawa, M. Aritomi, M. Oda, T. Miyauchi

J. Eng. Mater. Technol. July 2010, 132(3): 031007. doi: https://doi.org/10.1115/1.4001444

Abstract

View articletitled, Local Delamination Buckling of a Laminated Beam due to Three-Point Bending

Open the PDF for in another window

Topics: Buckling , Delamination , Fracture (Materials) , Stress , Deflection

Experimental Characterization of Damage Processes in Aluminum AA2024-O

S. Kweon, A. J. Beaudoin, R. J. McDonald

J. Eng. Mater. Technol. July 2010, 132(3): 031008. doi: https://doi.org/10.1115/1.4001445

Abstract

View articletitled, Experimental Characterization of Damage Processes in Aluminum AA2024-O

Open the PDF for in another window

Topics: Damage , Displacement , Fracture (Materials) , Fracture (Process) , Hydrostatics , Plasticity , Shear (Mechanics) , Simulation , Stress , Tension

Prediction of Elastic-Plastic Boundary Around Cold-Expanded Holes Using Elastic Strain Measurement

Nripendu Dutta, Jahan Rasty

J. Eng. Mater. Technol. July 2010, 132(3): 031009. doi: https://doi.org/10.1115/1.4001591

Abstract

View articletitled, Prediction of Elastic-Plastic Boundary Around Cold-Expanded Holes Using Elastic Strain Measurement

Open the PDF for in another window

Topics: Aluminum , Deformation , Fatigue life , Finite element analysis , Strain measurement , Stress , Strain gages , Plasticity , Stress concentration

Effect of Phase Transformation on the Wear Behavior of NiTi Alloy

M. Abedini, H. M. Ghasemi, M. Nili Ahmadabadi, R. Mahmudi

J. Eng. Mater. Technol. July 2010, 132(3): 031010. doi: https://doi.org/10.1115/1.4001593

Abstract

View articletitled, Effect of Phase Transformation on the Wear Behavior of NiTi Alloy

Open the PDF for in another window

Topics: Alloys , Nickel titanium alloys , Phase transitions , Pseudoelasticity , Temperature , Testing , Wear , Wear testing , Work hardening , Shape memory effects

Polycrystal Plasticity Modeling of Cyclic Residual Stress Relaxation in Shot Peened Martensitic Gear Steel

Rajesh Prasannavenkatesan, David L. McDowell

J. Eng. Mater. Technol. July 2010, 132(3): 031011. doi: https://doi.org/10.1115/1.4001594

Abstract

View articletitled, Polycrystal Plasticity Modeling of Cyclic Residual Stress Relaxation in Shot Peened Martensitic Gear Steel

Open the PDF for in another window

Topics: Plasticity , Relaxation (Physics) , Residual stresses , Shot peening , Steel , Stress , Gears , Crystals , Deformation , Cycles

Tube Hydroforming of Magnesium Alloys at Elevated Temperatures

Yeong-Maw Hwang, Yan-Huang Su, Bing-Jian Chen

J. Eng. Mater. Technol. July 2010, 132(3): 031012. doi: https://doi.org/10.1115/1.4001833

Abstract

View articletitled, Tube Hydroforming of Magnesium Alloys at Elevated Temperatures

Open the PDF for in another window

Topics: Finite element analysis , Flow (Dynamics) , Magnesium alloys , Pressure , Shapes , Temperature , Deformation , Machinery , Simulation

Modeling and Simulation of the Failure and Stiffness Degradation of a Graphite Epoxy in a Three Point Bending Test

E. H. Irhirane, M. Abousaleh, J. Echaabi, M. Hattabi, A. Saouab, M. O. Bensalah

J. Eng. Mater. Technol. July 2010, 132(3): 031013. doi: https://doi.org/10.1115/1.3078392

Abstract

View articletitled, Modeling and Simulation of the Failure and Stiffness Degradation of a Graphite Epoxy in a Three Point Bending Test

Open the PDF for in another window

Topics: Failure , Laminates , Stiffness , Stress , Modeling , Damage , Failure mechanisms

A Numerical and Experimental Investigation on the Fatigue Behavior of a Steel Nitrided Crankshaft for High Power IC Engines

Sergio Baragetti, Stefano Cavalleri, Angelo Terranova

J. Eng. Mater. Technol. July 2010, 132(3): 031014. doi: https://doi.org/10.1115/1.4001834

Abstract

View articletitled, A Numerical and Experimental Investigation on the Fatigue Behavior of a Steel Nitrided Crankshaft for High Power IC Engines

Open the PDF for in another window

Topics: Fatigue , Stress , Residual stresses , Nitriding

Direct Fabrication of Hierarchical Microstructures on Metals by Means of Direct Laser Interference Patterning

Matthias Bieda, Eckhard Beyer, Andrés F. Lasagni

J. Eng. Mater. Technol. July 2010, 132(3): 031015. doi: https://doi.org/10.1115/1.4001835

Abstract

View articletitled, Direct Fabrication of Hierarchical Microstructures on Metals by Means of Direct Laser Interference Patterning

Open the PDF for in another window

Topics: Aluminum , Diffraction gratings , Lasers , Manufacturing , Metals , Simulation , Stainless steel , Titanium , Density , Temperature

Epoxy Adhesives Modified With Nano- and Microparticles for In Situ Timber Bonding: Effect of Environment on Mechanical Properties and Moisture Uptake

Z. Ahmad, M. P. Ansell, D. Smedley

J. Eng. Mater. Technol. July 2010, 132(3): 031016. doi: https://doi.org/10.1115/1.4001836

Abstract

View articletitled, Epoxy Adhesives Modified With Nano- and Microparticles for In Situ Timber Bonding: Effect of Environment on Mechanical Properties and Moisture Uptake

Open the PDF for in another window

Topics: Adhesives , Temperature , Tensile strength , Timber , Epoxy adhesives , Water

Technical Briefs

The Relation of the Vickers Hardness With the Loading Stiffness of Instrumented Vickers Indentation of Metal Substrates

E. A. Baxevani, A. E. Giannakopoulos

J. Eng. Mater. Technol. July 2010, 132(3): 034501. doi: https://doi.org/10.1115/1.4001300

Abstract

View articletitled, The Relation of the Vickers Hardness With the Loading Stiffness of Instrumented Vickers Indentation of Metal Substrates

Open the PDF for in another window

Topics: Metals , Stiffness , Vickers hardness testing , Work hardening

All Issues

Email alerts

Accepted Manuscript Alert

New Issue Alert

RSS Feeds

Open Issues RSS Feed

Latest
Most Read
Most Cited

Investigating Microstructure and Wear Characteristics of Alloy Steels Used as Wear Plates in Ballast Cleaning Operation in Railways

J. Eng. Mater. Technol (January 2025)

MODELING GROWTH AND VISCOUS FLOW OF OXIDE ON CYLINDRICAL SILICON SURFACES INCLUDING PIEZOVISCOUS INHIBITION

J. Eng. Mater. Technol

Thermal Conductivity of 3D Printed Metal using Extrusion-based Metal Additive Manufacturing Process

J. Eng. Mater. Technol

Active Constrained Layer Damping of Beams With Natural Fiber Reinforced Viscoelastic Composites

J. Eng. Mater. Technol (January 2025)

High-Temperature Fatigue of Additively Manufactured Inconel 718: A Short Review

J. Eng. Mater. Technol (January 2025)

Research Papers

Principles of Nonequal Channel Angular Pressing

Stress Whitening Quantification of Thermoformed Mineral Filled Acrylics

${Al}_{2} O_{3}$ Graded Coatings on Aluminum Alloy Deposited by the Fluidized Bed (FB) Technique: Film Formation and Mechanical Performance

Experimental and Numerical Determination of Limiting Drawing Ratio of Al3105-Polypropylene-Al3105 Sandwich Sheets

Fatigue Behavior of Single Crystal Superalloy Bars Joined by Capacitor Discharge Welding

Identification of Process Parameters for Friction Stir Welding Ti–6Al–4V

Local Delamination Buckling of a Laminated Beam due to Three-Point Bending

Experimental Characterization of Damage Processes in Aluminum AA2024-O

Prediction of Elastic-Plastic Boundary Around Cold-Expanded Holes Using Elastic Strain Measurement

Effect of Phase Transformation on the Wear Behavior of NiTi Alloy

Polycrystal Plasticity Modeling of Cyclic Residual Stress Relaxation in Shot Peened Martensitic Gear Steel

Tube Hydroforming of Magnesium Alloys at Elevated Temperatures

Modeling and Simulation of the Failure and Stiffness Degradation of a Graphite Epoxy in a Three Point Bending Test

A Numerical and Experimental Investigation on the Fatigue Behavior of a Steel Nitrided Crankshaft for High Power IC Engines

Direct Fabrication of Hierarchical Microstructures on Metals by Means of Direct Laser Interference Patterning

Epoxy Adhesives Modified With Nano- and Microparticles for In Situ Timber Bonding: Effect of Environment on Mechanical Properties and Moisture Uptake

Technical Briefs

The Relation of the Vickers Hardness With the Loading Stiffness of Instrumented Vickers Indentation of Metal Substrates

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Technical Briefs

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only