The use of less than six degrees of freedom (dof) mechanisms instead of six-dof ones is always recommended when the application makes it possible, since their architectures and control are simpler to manufacture and implement respectively. Three-dof mechanisms constitute an important subset of less-than-six-dof mechanisms, since either translational or spherical motion can be obtained through three-dof spatial mechanisms and many industrial applications require the only translational or spherical motion. This paper presents a new translational parallel mechanism (TPM), named translational 3-URC. The new mechanism belongs to the parallel architectures with 3-URC topology, which contain another architecture that is a spherical parallel wrist. The proposed TPM is not overconstrained and has three equal legs whose kinematic pairs are three revolute pairs and one passive cylindrical pair per leg. Its actuated pairs are three revolute pair located on the frame. The position and velocity analyses of the translational 3-URC will be addressed and solved. Its singularity conditions will be written in explicit form and geometrically interpreted.

Issue Section:
Technical Briefs
Keywords:
robot kinematics
Topics:
Kinematics, Parallel mechanisms, Manufacturing, Architecture, Degrees of freedom, Topology
1.
Innocenti, C., and Parenti-Castelli, V., 1994, “Exhaustive Enumeration of Fully-Parallel Kinematic Chains,” ASME Int. Winter Annual Meeting, Chicago (USA), DSC-Vol. 55-2, pp. 1135–1141.
2.
Tsai, L. W., 1996, “Kinematics of a Three-dof Platform With Three Extensible Limbs,” Recent Advances in Robot Kinematics, J. Lenarcic and V. Parenti-Castelli, eds., Kluwer Academic, Dordrecht, The Netherlands, pp. 401–410.
3.
Di Gregorio, R., and Parenti-Castelli, V., 1998, “A Translational 3-dof Parallel Manipulator,” Advances in Robot Kinematics: Analysis and Control, J. Lenarcic and M. L. Husty, eds., Kluwer Academic, Dordrecht, The Netherlands, pp. 49–58.
4.
Clavel, R., 1988, “DELTA, a Fast Robot With Parallel Geometry,” Proc. of the 18th International Symposium on Industrial Robots, Sydney (Australia), pp. 91–100.
5.
Di Gregorio, R., 2000, “Closed-Form Solution of the Position Analysis of the Pure Translational 3-RUU Parallel Mechanism,” Proc. of the 8th Symposium on Mechanisms and Mechanical Transmissions, MTM 2000, October 19–22, 2000, Timisoara (Romania), Vol. 1, pp. 119–124.
6.
Gosselin
,
L.
, and
Angeles
,
J.
,
1989
, “
The Optimum Kinematic Design of a Spherical Three-Degree-of-Freedom Parallel Manipulator
,”
ASME J. Mech. Transmis. Autom. Des.
,
111
, No.
2
, pp.
202
–
207
.
7.
Innocenti
,
C.
, and
Parenti-Castelli
,
V.
,
1993
, “
Echelon Form Solution of Direct Kinematics for the General Fully-Parallel Spherical Wrist
,”
Mech. Mach. Theory
,
28
, No.
4
, pp.
553
–
561
.
8.
Agrawal
,
S. K.
,
Desmier
,
G.
, and
Li
,
S.
,
1995
, “
Fabrication and Analysis of a Novel 3-dof Parallel Wrist Mechanism
,”
ASME J. Mech. Des.
,
117
, No.
2A
, pp.
343
–
345
.
9.
Karouia, M., and Herve´, J. M., 2000, “A Three-dof Tripod for Generating Spherical Rotation,” Advances in Robot Kinematics, J. Lenarcic and M. M. Stanisic, eds., Kluwer Academic, Dordrecht, The Netherlands, pp. 395–402.
10.
Di Gregorio
,
R.
,
2001
, “
A new Parallel Wrist Employing Only Revolute Pairs: the 3-RUU Wrist
,”
Robotica
,
19
, No.
3
, pp.
305
–
309
.
11.
Di Gregorio
,
R.
,
2001
, “
Kinematics of a new Spherical Parallel Manipulator With Three Equal Legs: the 3-URC Wrist
,”
J. Rob. Syst.
,
18
, No.
5
, pp.
213
–
219
.
12.
Husty
,
M. L.
,
1996
, “
An Algorithm for Solving the Direct Kinematics of the Stewart-Gough Platform
,”
Mech. Mach. Theory
,
31
, No.
4
, pp.
365
–
380
.
13.
Herve´, J.-M., and Sparacino, F., 1991, “Structural Synthesis of Parallel Robots Generating Spatial Translation,” Proc. of 1991 IEEE Int. Conf. on Advaced Robotics, Pisa (Italy), June 19–22, 1991, pp. 808–813.
14.
Herve´, J.-M., 1995, “Group Mathematics and Parallel Link Mechanisms,” Proc. of the 9th World Congress on the Theory of Machines and Mechanisms, Milano (Italy), August 30–September 2, 1995, pp. 2079–2082.
15.
Tsai, L.-W., Walsh, G. C., and Stamper, R. C., 1996, “Kinematics of a Novel Three-dof Translational Platform,” Proc. of 1996 IEEE Int. Conf. on Robotics and Automation, Minneapolis (USA), April 24–26, 1996, pp. 3446–3451.
16.
Stamper, R. C., Tsai, L.-W., and Walsh, G. C., 1997, “Optimization of a Three-dof Translational Platform for Well-Conditioned Workspace,” Proc. of 1997 IEEE Int. Conf. on Robotics and Automation, Albuquerque (USA), April 21–28, 1997, pp. 3250–3255.
17.
Bruzzone, L. E., Molfino, R., and Zoppi, M., 2002, “A Cost-Effective Purely Translational Parallel Robot for Rapid Assembly Tasks,” Proc. of the 3rd Chemnitz Seminar on Parallel Kinematics, Chemnitz (Germany), April 23–25, 2002, pp. 429–440.
18.
Carricato
,
M.
, and
Parenti-Castelli
,
V.
,
2002
, “
Singularity-Free Fully Isotropic Translational Parallel Mechanisms
,”
Int. J. Robot. Res.
,
21
, No.
2
, pp.
161
–
174
.
19.
Chablat
,
D.
, and
Wenger
,
P.
,
2003
, “
Architecture Optimization of a 3-dof Translational Parallel Mechanism for Machining Applications: the Orthoglide
,”
IEEE Trans. Rob. Autom.
,
19
, No.
3
, pp.
403
–
410
.
20.
Kong, X., and Gosselin, C. M., 2002, “A Class of 3-dof Translational Parallel Manipulators With Linear Input-Output Equations,” Proc. of Workshop on Fundamental Issues and Future Directions for Parallel Mechanisms and Manipulators, Que´bec City (Canada), October 3–4, pp. 25–32.
21.
Liu
,
X.-J.
,
Jeong
,
J. I.
, and
Kim
,
J.
,
2003
, “
A Three Translational Dofs Parallel Cube Manipulator
,”
Robotica
,
21
, pp.
645
–
652
.
Copyright © 2004
 by ASME
You do not currently have access to this content.