Abstract
An integrated offshore wind and wave energy system is an attractive concept in areas with abundant wind and wave energy resources. The sharing of supporting platform and facilities, e.g., mooring systems, offers significant cost savings. This will effectively lower the levelized cost of energy (LCOE). In the present study, a conceptual design consisting of a braceless semi-submersible floating horizontal axis wind turbine (FHAWT), three flap-type wave energy converters (WECs), as well as a torus (donut-shaped) point absorber-type WEC is proposed. The flap-type WECs harvest wave energy through the flap motion caused by oscillating wave surge, while the torus WEC absorbs wave energy generated from its heaving motion. The absorbed mechanical power of the power take-off (PTO) systems is calculated based on linear damping forces and the motions of the WECs relative to the supporting platform. Hydrodynamic interaction between the WECs and the supporting platform is considered by including the coupling terms in the added mass and potential damping coefficient matrices. A fully coupled aero-servo-hydro-elastic numerical model of the concept is constructed. The feasibility study of the concept is carried out using time-domain simulations. Only operational environmental conditions are simulated based on simultaneous wind and wave hindcast data of a selected offshore site. The effects of the WECs on the wind turbine, platform motions, and WEC power take-off are examined. Based on the power performance of WECs, recommendations are also provided for optimum power absorption.
