Skip to Main Content

Just Accepted Manuscript

Research-Article July 22, 2020
Technical Basis Part 2 for Code Case N-889: Reference Stress Corrosion Crack Growth Rate Curves for Irradiated Austenitic Stainless Steels in Light Water Reactor Environments
J. Pressure Vessel Technol. doi: https://doi.org/10.1115/1.4047878
Research-Article July 22, 2020
Simulation of Cyclic Loading on Pipe Elbows using Advanced Plane-Stress Elasto-Plasticity Models
J. Pressure Vessel Technol. doi: https://doi.org/10.1115/1.4047876
Research-Article July 22, 2020
Dynamic Analysis of a High-Pressure Relief Valve During Opening
J. Pressure Vessel Technol. doi: https://doi.org/10.1115/1.4047865
Research-Article July 22, 2020
Finite Element Modeling of Hybrid Friction Diffusion Welding of Tube-Tubesheet Joints
J. Pressure Vessel Technol. doi: https://doi.org/10.1115/1.4047875
Research-Article July 22, 2020
Technical Basis Part 1 for Code Case N-889: Data Selection and Modeling of Stress Corrosion Crack Growth Rates for Irradiated Austenitic Stainless Steels in Light Water Reactor Environments
J. Pressure Vessel Technol. doi: https://doi.org/10.1115/1.4047879
Review Articles July 22, 2020
Fault-Tolerance Techniques and Global Positioning Systems Based on Artificial Intelligence for the Analysis of Corrosion Impact on the Pipelines of Oil and Gas Industry.
J. Pressure Vessel Technol. doi: https://doi.org/10.1115/1.4047880
Research-Article July 20, 2020
The Branching Redesign Technique Used for Upgrading Steel-Pipes-Based Hydraulic Systems : Re-Examined.
J. Pressure Vessel Technol. doi: https://doi.org/10.1115/1.4047829
Research-Article July 20, 2020
Application of Short and Long (Enhanced Vlasov's) Solutions for Cylindrical Shell On Example of Concentrated Radial Force
J. Pressure Vessel Technol. doi: https://doi.org/10.1115/1.4047828
Research-Article July 7, 2020
Study on Limit Load of Orthotropic Cylindrical Pipe Under Different Combined Load Conditions
J. Pressure Vessel Technol. doi: https://doi.org/10.1115/1.4047714
Research-Article July 6, 2020
Design Optimization of Pressure Vessel in Compliance with Elastic Stress Analysis Criteria for Plastic Collapse Using an Integrated Approach
J. Pressure Vessel Technol. doi: https://doi.org/10.1115/1.4047713
Research-Article June 8, 2020
Effect of Loading Rate and Pipe Wall Thickness on the Strength and Toughness of Welded and Unwelded Polyethylene Pipes
J. Pressure Vessel Technol. doi: https://doi.org/10.1115/1.4047444
Errata March 26, 2020
Erratum: “A Reaffirmation of Fracture Toughness Requirements for ASME Section VIII Vessels for Service Temperatures Colder Than 77 K” [ASME. J. Pressure Vessel Technol., 2017, 139(4), p. 041407. https://doi.org/10.1115/1.4036138]
J. Pressure Vessel Technol. doi: https://doi.org/10.1115/1.4046738
Technical Briefs February 17, 2020
Finite Element Analysis Model and Residual Stress Optimization in Rotor Welding Process
J. Pressure Vessel Technol. doi: https://doi.org/10.1115/1.4046358
Research-Article January 1, 2020
Numerical and Analytical Studies of Low Cycle Fatigue Behavior of 316 LN Austenitic Stainless Steel
J. Pressure Vessel Technol. doi: https://doi.org/10.1115/1.4045897
Technical Briefs November 1, 2019
Analysis of Residual Stresses On the Expanding Transition Zone of Steam Generator Tubes of Apr1400
J. Pressure Vessel Technol. doi: https://doi.org/10.1115/1.4045392
Technology Review July 3, 2017
Fitness for Service of Layered Multiwalled Design Vessels
J. Pressure Vessel Technol. doi: https://doi.org/10.1115/1.4037197
Close Modal
This Feature Is Available To Subscribers Only

Sign In or Create an Account

Close Modal
Close Modal