In this study, the failure mechanism of laser welds in lap-shear specimens of a high strength low alloy (HSLA) steel under quasi-static loading conditions is examined based on the experimental and computational results. Optical micrographs of the welds in the specimens before tests were examined to understand the microstructure near the weld. A micrographic analysis of the failed welds in lap-shear specimens indicates a ductile necking/shear failure mechanism near the heat affected zone. Micro-hardness tests were conducted to provide an assessment of the mechanical properties of the joint area which has varying microstructure due to the welding process. A finite element analysis was also carried out to identify the effects of the weld geometry and different mechanical properties of the weld and heat affected zones on the failure mechanism. The results of the finite element analysis show that the geometry of the weld protrusion and the higher effective stress–plastic strain curves of the heat affected and weld zones result in the necking/shear failure of the load carrying sheet. The deformed shape of the finite element model near the weld matches well with that near a failed weld. A finite element analysis based on the Gurson yield function with consideration of void nucleation and growth was also carried out. The results of the finite element analysis indicate that the location of the material elements with the maximum void volume fraction matches well with that of the initiation of ductile fracture as observed in the experiments.
Skip Nav Destination
Article navigation
December 2012
Research-Article
Failure Mechanism of Laser Welds in Lap-Shear Specimens of a High Strength Low Alloy Steel
Jwo Pan
Jwo Pan
1
1Corresponding author.
Search for other works by this author on:
1Corresponding author.
Contributed by the Pressure Vessel and Piping Division of ASME for publication in the JOURNALOF PRESSURE VESSEL TECHNOLOGY. Manuscript received March 17, 2011; final manuscript received March 16, 2012; published online October 18, 2012. Assoc. Editor: Xian-Kui Zhu.
J. Pressure Vessel Technol. Dec 2012, 134(6): 061402 (5 pages)
Published Online: October 18, 2012
Article history
Received:
March 17, 2011
Revision Received:
March 16, 2012
Citation
Lee, J., Asim, K., and Pan, J. (October 18, 2012). "Failure Mechanism of Laser Welds in Lap-Shear Specimens of a High Strength Low Alloy Steel." ASME. J. Pressure Vessel Technol. December 2012; 134(6): 061402. https://doi.org/10.1115/1.4006560
Download citation file:
Get Email Alerts
Cited By
The Behaviour of Elbow Elements at Pure Bending Applications Compared to Beam and Shell Element models
J. Pressure Vessel Technol
Measurement of Steam-Generator-Tube Vibration Damping Caused by Anti-Vibration-Bar Supports
J. Pressure Vessel Technol (February 2025)
Related Articles
An alternative finite element formulation to predict ductile fracture in highly deformable materials
J. Eng. Mater. Technol (January,0001)
Prediction of Necking in Tubular Hydroforming Using an Extended Stress-Based Forming Limit Curve
J. Eng. Mater. Technol (January,2007)
A Method for In-Process Failure Prediction in Cold Upset Forging
J. Eng. Ind (August,1983)
Related Chapters
Applications of Elastic-Plastic Fracture Mechanics in Section XI, ASME Code Evaluations
Online Companion Guide to the ASME Boiler & Pressure Vessel Codes
The Conditions at Ductile Fracture in Tension Tests
Fracture Mechanics: Twenty-Third Symposium
STRUCTURAL RELIABILITY ASSESSMENT OF PIPELINE GIRTH WELDS USING GAUSSIAN PROCESS REGRESSION
Pipeline Integrity Management Under Geohazard Conditions (PIMG)