Skip Nav Destination
Issues
November 2008
ISSN 0094-9930
EISSN 1528-8978
Research Papers
Design and Analysis
A Novel and Simple Approach for Predicting Creep Life Based on Tertiary Creep Behavior
J. Pressure Vessel Technol. November 2008, 130(4): 041201.
doi: https://doi.org/10.1115/1.2967879
Study of Parameter Effects on Residual Stresses and Thermal Deformation of Brazed Plate-Fin Structure Using Finite Element Method
J. Pressure Vessel Technol. November 2008, 130(4): 041202.
doi: https://doi.org/10.1115/1.2967740
Topics:
Brazing
,
Filler metals
,
Thermal deformation
,
Stress
,
Residual stresses
,
Temperature
,
Vacuum
,
Finite element analysis
,
Pressure
,
Finite element methods
Finite Element Analysis of the Effect of Brazed Residual Stress on Creep for Stainless Steel Plate-Fin Structure
J. Pressure Vessel Technol. November 2008, 130(4): 041203.
doi: https://doi.org/10.1115/1.2967807
Topics:
Creep
,
Finite element analysis
,
Stainless steel
,
Stress
,
Brazing
Modeling the Effects of Initial Tube-Tubesheet Clearance, Wall Reduction and Material Strain Hardening on Rolled Joint Strength
J. Pressure Vessel Technol. November 2008, 130(4): 041204.
doi: https://doi.org/10.1115/1.2967809
Topics:
Clearances (Engineering)
,
Stress
,
Work hardening
,
Rollers
,
Pressure
,
Finite element analysis
Elastoplastic Analysis of a Miniature Circular Disk Bending Specimen
J. Pressure Vessel Technol. November 2008, 130(4): 041205.
doi: https://doi.org/10.1115/1.2967812
Topics:
Deflection
,
Disks
,
Finite element analysis
,
Stress
,
Yield stress
,
Steel
,
Ductility
An Inverse Method for the Determination of Thermal Stress-Intensity Factors Under Arbitrary Thermal-Shocks
J. Pressure Vessel Technol. November 2008, 130(4): 041206.
doi: https://doi.org/10.1115/1.2967737
Topics:
Fracture (Materials)
,
Stress
,
Temperature
,
Thermal shock
,
Temperature distribution
,
Polynomials
,
Slabs
Structural Integrity Assessment of Steam Generator Tube by the Use of Heterogeneous Finite Element Method
J. Pressure Vessel Technol. November 2008, 130(4): 041207.
doi: https://doi.org/10.1115/1.2967727
Failure Modes of Perforated Material Under Finite Deformation
J. Pressure Vessel Technol. November 2008, 130(4): 041208.
doi: https://doi.org/10.1115/1.2967881
General Variable Material Property Formulation for the Solution of Autofrettaged Thick-Walled Tubes With Constant Axial Strains
J. Pressure Vessel Technol. November 2008, 130(4): 041209.
doi: https://doi.org/10.1115/1.2973239
Topics:
Autofrettage
,
Plane strain
,
Materials properties
Study of Plastic Limit Load on Pressurized Cylinders With Lateral Nozzle
J. Pressure Vessel Technol. November 2008, 130(4): 041210.
doi: https://doi.org/10.1115/1.2967743
Topics:
Cylinders
,
Finite element analysis
,
Nozzles
,
Stress
,
Vessels
,
Computer simulation
,
Deformation
A 3-D Model for Evaluating the Residual Stress Field Due to Swage Autofrettage
J. Pressure Vessel Technol. November 2008, 130(4): 041211.
doi: https://doi.org/10.1115/1.2967741
Topics:
Autofrettage
,
Stress
,
Three-dimensional models
,
Pressure
,
Displacement
The Assessment of Residual Stress Effects on Ductile Tearing Using Continuum Damage Mechanics
J. Pressure Vessel Technol. November 2008, 130(4): 041212.
doi: https://doi.org/10.1115/1.2967876
Topics:
Ductile fracture
,
Fracture (Materials)
,
Stress
,
Calibration
,
Residual stresses
,
Fracture toughness
,
Damage mechanics
,
Plane strain
Fluid-Structure Interaction
-Resistance Properties of Narrow Gap GTAW Welds for Ferritic Primary Loop Piping
J. Pressure Vessel Technol. November 2008, 130(4): 041301.
doi: https://doi.org/10.1115/1.2967810
Topics:
Fracture toughness
,
Pipes
,
Welded joints
,
Welding
,
Fracture (Materials)
Characteristics of the Suppression of Sloshing in a Vessel by a Bulkhead
J. Pressure Vessel Technol. November 2008, 130(4): 041302.
doi: https://doi.org/10.1115/1.2967828
Topics:
Breakwaters
,
Damping
,
Flow (Dynamics)
,
Sloshing
,
Vessels
,
Vortices
,
Excitation
Harmonic Analysis of a Cylinder Cluster in Square Confinement With Position-Dependent Fluid Damping
J. Pressure Vessel Technol. November 2008, 130(4): 041303.
doi: https://doi.org/10.1115/1.2967755
Topics:
Cylinders
,
Damping
,
Fluids
,
Modal analysis
,
Vibration
,
Fuel rods
,
Finite element analysis
Materials and Fabrication
Effect of High-Pressure Hydrogen Gas on Fracture of Austenitic Steels
J. Pressure Vessel Technol. November 2008, 130(4): 041401.
doi: https://doi.org/10.1115/1.2967833
Topics:
Fracture (Materials)
,
Fracture (Process)
,
High pressure (Physics)
,
Hydrogen
,
Stainless steel
,
Ductility
,
Alloys
,
Yield strength
Determination of -Integral Using the Load-COD Record for Circumferential Through-Wall Cracked Pipes
J. Pressure Vessel Technol. November 2008, 130(4): 041402.
doi: https://doi.org/10.1115/1.2967830
Topics:
Displacement
,
Finite element analysis
,
Fracture (Materials)
,
Pipes
,
Stress
,
Tension
,
Testing
Computational and Experimental Studies of High Temperature Crack Initiation in the Presence of Residual Stress
J. Pressure Vessel Technol. November 2008, 130(4): 041403.
doi: https://doi.org/10.1115/1.2967831
Topics:
Creep
,
Stress
,
Finite element analysis
,
Damage
,
Fracture (Materials)
Seismic Engineering
Discrete Models for Seismic Analysis of Liquid Storage Tanks of Arbitrary Shape and Fill Height
J. Pressure Vessel Technol. November 2008, 130(4): 041801.
doi: https://doi.org/10.1115/1.2967834
Topics:
Finite element methods
,
Finite element model
,
Fluids
,
Pressure
,
Seismic analysis
,
Shapes
,
Sloshing
,
Storage tanks
,
Springs
,
Excitation
Email alerts
RSS Feeds
Research on the Accelerated Life Test Method for Gaskets and the Verification of the Accuracy of the Life Prediction
J. Pressure Vessel Technol (June 2025)
Optimization of High-Vapor Pressure Condensate Pipeline Commissioning Schemes in Large Uplift Environments
J. Pressure Vessel Technol (June 2025)
Technical Basis for Revising the Fatigue Crack Growth Rates for Ferritic Steels in the ASME Code Section XI
J. Pressure Vessel Technol (June 2025)