The paper presents a numerical model to investigate fretting wear either under partial or gross slip conditions. An efficient three-dimensional elastic–static contact model to solve both the normal contact problem and the tangential contact problem is presented. The contact model is validated with analytical solutions for a sphere on flat geometry. A wear law issued from the literature and based on the friction energy is used to simulate surface wear. Numerical friction logs are obtained and the wear rate evolution is found to be highly dependent on the tangential displacement.
Issue Section:
Technical Papers
Keywords:
wear,
mechanical contact,
elasticity,
friction,
fretting,
fretting wear,
stick-slip,
wear simulation
1.
Mindlin
, R. D.
, 1949, “Compliance of Elastic Bodies in Contact
,” ASME J. Appl. Mech.
0021-8936, 16
, pp. 259
–268
.2.
Zhou
, Z. R.
, and Vincent
, L.
, 1995, “Mixed Fretting Regimes
,” Wear
0043-1648, 181–183
, pp. 531
–536
.3.
Vincent
, L.
, Berthier
, Y.
, and Godet
, M.
, 1992, “Testing Methods in Fretting Fatigue: A Critical Appraisal
,” ASTM Spec. Tech. Publ.
0066-0558, 1159
, pp. 33
–48
.4.
Gallego
, L.
, Nélias
, D.
, and Jacq
, C.
, 2006, “A Comprehensive Method to Predict Wear and to Define the Optimum Geometry of Fretting Surfaces
,” ASME J. Tribol.
0742-4787, 128
, pp. 476
–485
.5.
Mohrbacher
, H.
, Blanpain
, B.
, Celis
, J. P.
, Roos
, J. R.
, Stals
, L.
, and Van Stappen
, M.
, 1995, “Oxidational Wear of TiN Coatings on Tool Steel and Nitrided Tool Steel in Unlubricated Fretting
,” Wear
0043-1648, 188
, pp. 130
–137
.6.
Fouvry
, S.
, Kapsa
, P.
, and Vincent
, L.
, 1996, “Quantification of Fretting Damage
,” Wear
0043-1648, 200
, pp. 186
–205
.7.
Fridrici
, V.
, Fouvry
, S.
, and Kapsa
, P.
, 2003, “Fretting Wear Behavior of a Cu–Ni–In Plasma Coating
,” Surf. Coat. Technol.
0257-8972, 163–164
, pp. 429
–434
.8.
Fouvry
, S.
, Duó
, P.
, and Perruchaut
, P.
, 2004, “A Quantitative Approach of Ti–6Al–4V Fretting Damage: Friction, Wear and Crack Nucleation
,” Wear
0043-1648, 257
, pp. 916
–929
.9.
Paulin
, C.
, Fouvry
, S.
, and Deyber
, S.
, 2005, “Wear Kinetics of Ti–6Al–4V under Constant and Variable Fretting Sliding Conditions
,” Wear
0043-1648, 259
, pp. 292
–299
.10.
Paulin
, C.
, 2006, “Etude de l"Endommagement du Contact Multicouche Aube∕Disque Sous Chargement de Fretting: Impact des Sollicitations Variables et de la Dimension du Contact
,” Ph.D. thesis, Ecole Centrale de Lyon, France.11.
McColl
, I. R.
, Ding
, J.
, and Leen
, S. B.
, 2004, “Finite Element Simulation and Experimental Validation of Fretting Wear
,” Wear
0043-1648, 256
, pp. 1114
–1127
.12.
Ding
, J.
, Leen
, S. B.
, and McColl
, I. R.
, 2004, “The Effect of Slip Regime on Fretting Wear-Induced Stress Evolution
,” Int. J. Fatigue
0142-1123, 26
, pp. 521
–531
.13.
Kapsa
, P.
, and Cartier
, M.
, 2001, “Usure des Contacts Mécaniques. Manifestations de l'usure
,” Techniques de l’ingénieur. Génie mécanique
,BD1
(BM5067
), pp. 1
–14
.14.
Archard
, J. F.
, 1953, “Contact and Rubbing of Flat Surfaces
,” J. Appl. Phys.
0021-8979, 24
, pp. 981
–988
.15.
Godet
, M.
, 1984, “The Third Body Approach, a Mechanical Point of View of Wear
,” Wear
0043-1648, 100
, pp. 437
–452
.16.
Berthier
, Y.
, Vincent
, L.
, and Godet
, M.
, 1988, “Velocity Accommodation in Fretting
,” Wear
0043-1648, 125
, pp. 25
–38
.17.
Johnson
, K. L.
, 1985, Contact Mechanics
, Cambridge University Press
, London, U.K.
18.
Love
, A. E. H.
, 1927, A Treatise on the Mathematical Theory of Elasticity
, 4th ed., Cambridge University Press
, Cambridge, U.K.
19.
Kalker
, J. J.
, 1990, Three Dimensional Elastic Bodies in Rolling Contact
, Kluwer Academic
, Dordrecht, The Netherlands
.20.
Kalker
, J. J.
, 1977, “Variational Principles of Contact Elastostatics
,” J. Inst. Math. Appl.
0020-2932, 20
, pp. 199
–219
.21.
Johnson
, K. L.
, 1955, “Surface Interaction between Elastically Loaded Bodies under Tangential Forces
,” Proc. R. Soc. London, Ser. A
1364-5021, 320
, pp. 531
–548
.22.
Polonsky
, I. A.
, and Keer
, L. M.
, 1999, “A Numerical Method for Solving Rough Contact Problems Based on the Multi-Level Multi-Summation and Conjugate Gradient Techniques
,” Wear
0043-1648, 231
, pp. 206
–219
.23.
Liu
, S.
, Wang
, Q.
, and Liu
, G.
, 2000, “A Versatile Method of Discrete Convolution and FFT (DC-FFT) for Contact Analyses
,” Wear
0043-1648, 243
, pp. 101
–111
.24.
Tian
, X.
, and Bhushan
, B.
, 2001, “A Numerical Three-Dimensional Model for the Contact of Rough Surfaces by Variational Principle
,” ASME J. Tribol.
0742-4787, 123
, pp. 330
–342
.25.
Xiaolan
, A.
, and Krich
, S.
, 1999, “Solving Elastic Contact Between Rough Surfaces as an Unconstrained Strain Energy Minimization by Using CGM and FFT Techniques
,” ASME J. Tribol.
0742-4787, 121
, pp. 639
–647
.26.
Allwood
, J.
, 2005, “Survey and Performance Assessment of Solution Methods for Elastic Rough Contact Problems
,” ASME J. Tribol.
0742-4787, 127
, pp. 10
–23
.27.
Boucly
, V.
, Nélias
, D.
, and Liu
, S. B.
, 2005, “Contact Analyses for Bodies with Frictional Heating and Plastic Behavior
,” ASME J. Tribol.
0742-4787, 127
, pp. 355
–364
.28.
Nélias
, D.
, Boucly
, V.
, and Brunet
, M.
, 2006, “Elastic-Plastic Contact between Rough Surfaces: Proposal for a Wear or Running-in Model
,” ASME J. Tribol.
0742-4787, 128
, pp. 236
–244
.29.
Antaluca
, E.
, Nélias
, D.
, and Cretu
, S.
, 2004, “A Three-Dimensional Friction Model for Elastic-Plastic Contact with Tangential Loading—Application to Dented Surfaces
,” Proceedings of 2004 ASME∕STLE International Joint Tribology Conference
, ASME
, New York
, Paper No. TRIB2004-64331.30.
Boucly
, V.
, Nélias
, D.
, and Green
, I.
, 2007, “Modeling of Rolling and Sliding Contact Between Two Asperities
,” ASME J. Tribol.
0742-4787, 129
, pp. 235
–245
.31.
Fouvry
, S.
, Kapsa
, P.
, and Vincent
, L.
, 1995, “Analysis of Sliding Behaviour for Fretting Loadings: Determination of Transition Criteria
,” Wear
0043-1648, 185
, pp. 35
–46
.Copyright © 2007
by American Society of Mechanical Engineers
You do not currently have access to this content.
