Abstract
The yield resistance of a coated sphere subjected to normal contact loading is studied based on a finite element analysis. Moderately hard coatings that were omitted in previous literature are considered. A maximum weakening/strengthening effect of minimizing/maximizing the yield resistance is observed to be linked to the transition of yield inception location. The necessary condition for a hard coating to strengthen a coated sphere is proposed. Only hard coatings with yield strength ratio above a threshold value can provide a constructive strengthening effect.
Issue Section:
Technical Brief
Topics:
Coatings
References
1.
Chen
, Z.
, and Etsion
, I.
, 2019
, “The Elastic-Plastic Contact Behavior of Rough Surfaces With Hard Coatings
,” Tribol. Int.
, 134
, pp. 435
–442
. 10.1016/j.triboint.2019.02.0252.
Wang
, Y.
, Cui
, Y.
, Liu
, S.
, Wang
, X.
, Tian
, X.
, and Zhai
, X.
, 2020
, “Contact Analysis of a Soft-Coated Asperity During Loading–Unloading Process in Consideration of Strain Hardening Effects
,” ASME J. Tribol.
, 142
(6
), p. 061501
. 10.1115/1.40460183.
Zhou
, S. H.
, Guo
, P.
, and Stolle
, D. F. E.
, 2018
, “Interaction Model for ‘Shelled Particles’ and Small-Strain Modulus of Granular Materials
,” ASME J. Appl. Mech.
, 85
(10
), p. 101001
. 10.1115/1.40404084.
Eid
, H.
, Joshi
, N.
, McGruer
, N. E.
, and Adams
, G. G.
, 2011
, “A Model of Contact With Adhesion of a Layered Elastic-Plastic Microsphere with a Rigid Flat Surface
,” ASME J. Tribol.
, 133
(3
), p. 031406
. 10.1115/1.40043435.
Lu
, S.
, Chu
, H.
, and Chen
, W.
, 2013
, “Investigation of Electrical Contact Mechanism for Anisotropic Conductive Adhesive Joints After the Thermocompression
,” IEEE Trans. Device Mater. Reliab.
, 13
(1
), pp. 54
–65
. 10.1109/TDMR.2012.22105546.
Bazilchuk
, M.
, Sumigawa
, T.
, Kitamura
, T.
, Zhang
, Z.
, Kristiansen
, H.
, and He
, J.
, 2020
, “Contact Area Measurement of Micron-Sized Metal-Coated Polymer Particles Under Compression
,” Int. J. Mech. Sci.
, 165
, p. 105241
. 10.1016/j.ijmecsci.2019.1052147.
Goltsberg
, R.
, Levy
, S.
, Kligerman
, Y.
, and Etsion
, I.
, 2018
, “Strengthening Effect of Soft Thin Coatings
,” ASME J. Tribol.
, 140
(6
), p. 064501
. 10.1115/1.40401158.
Zhao
, B.
, Xu
, H.
, Lu
, X.
, Ma
, X.
, Shi
, X.
, and Dong
, Q.
, 2019
, “Contact Behaviors of a Power-Law Hardening Elastic–Plastic Asperity With Soft Coating Flattened by a Rigid Flat
,” Int. J. Mech. Sci.
, 152
, pp. 400
–410
. 10.1016/j.ijmecsci.2019.01.0139.
Chatterjee
, A.
, Beheshti
, A.
, Polycarpou
, A. A.
, and Bellon
, P.
, 2016
, “Yield Maps for Single and Bilayer Thin Films Under Scratch
,” ASME J. Tribol.
, 138
(3
), p. 031402
. 10.1115/1.403251910.
Goltsberg
, R.
, Etsion
, I.
, and Davidi
, G.
, 2011
, “The Onset of Plastic Yielding in a Coated Sphere Compressed by a Rigid Flat
,” Wear
, 271
(11–12
), pp. 2968
–2977
. 10.1016/j.wear.2011.06.02511.
Goltsberg
, R.
, and Etsion
, I.
, 2013
, “A Model for the Weakening Effect of Very Thin Hard Coatings
,” Wear
, 308
(1–2
), pp. 10
–16
. 10.1016/j.wear.2013.09.01912.
Tabor
, D.
, 2000
, The Hardness of Metals
, Oxford University Press, London
.13.
Chen
, Z.
, Goltsberg
, R.
, and Etsion
, I.
, 2018
, “Yield Modes in a Coated Spherical Contact
,” Tribol. Int.
, 120
, pp. 309
–316
. 10.1016/j.triboint.2018.01.00514.
Ashby
, M. F.
, 2005
, Materials Selection in Mechanical Design
, Butterworth-Heinemann
, Oxford
.Copyright © 2020 by ASME
You do not currently have access to this content.