Abstract

We design a pattern of microtexture features to increase hydrodynamic pressure and lubricant film thickness in a hard-on-soft bearing. We use a soft elastohydrodynamic lubrication model to evaluate the effect of microtexture design parameters and bearing operating conditions on the resulting lubricant film thickness and find that the maximum lubricant film thickness occurs with a texture density between 10% and 40% and texture aspect ratio between 1% and 14%, depending on the bearing load and operating conditions. We show that these results are similar to those of hydrodynamic textured bearing problems because the lubricant film thickness is almost independent of the stiffness of the bearing surfaces in full-film lubrication.

References

References
1.
Wolford
,
M. L.
,
Palso
,
K.
, and
Bercovitz
,
A.
,
2015
, “
Hospitalization for Total Hip Replacement Among Inpatients Aged 45 and Over: United States, 2000–2010
,”
NCHS Data Brief, No. 186
.
National Center for Health Statistics
,
Hyattsville, MD
.
2.
Kurtz
,
S.
,
Ong
,
K.
,
Lau
,
E.
,
Mowat
,
F.
, and
Halpern
,
M.
,
2007
, “
Projections of Primary and Revision Hip and Knee Arthroplasty in the United States From 2005 to 2030
,”
J. Bone Jt. Surg.
,
89
(
4
), pp.
780
785
. 10.2106/JBJS.F.00222
3.
Ravi
,
B.
,
Croxford
,
R.
,
Reichmann
,
W. M.
,
Losina
,
E.
,
Katz
,
J. N.
, and
Hawker
,
G. A.
,
2012
, “
The Changing Demographics of Total Joint Arthroplasty Recipients in the United States and Ontario From 2001 to 2007
,”
Best Pract. Res. Clin. Rheumatol.
,
26
(
5
), pp.
637
647
. 10.1016/j.berh.2012.07.014
4.
Foran
,
J. R. H.
,
2015
,
Total Hip Replacement
, https://orthoinfo.aaos.org/en/treatment/total-hip-replacement, Accessed May 21, 2019.
5.
Charnley
,
J.
,
1961
, “
Arthroplasty of the Hip
,”
Lancet
,
277
(
7187
), pp.
1129
1132
. 10.1016/S0140-6736(61)92063-3
6.
Kurtz
,
S. M.
,
2004
,
The UHMWPE Handbook: Ultra-High Molecular Weight Polyethylene in Total Joint Replacement
,
Academic Press
,
Amsterdam
.
7.
Epinette
,
J. A.
, and
Manley
,
M. T.
,
2014
, “
No Differences Found in Bearing Related Hip Survivorship at 10–12 Years Follow-Up Between Patients With Ceramic on Highly Cross-Linked Polyethylene Bearings Compared to Patients With Ceramic on Ceramic Bearings
,”
J. Arthroplasty
,
29
(
7
), pp.
1369
1372
. 10.1016/j.arth.2014.02.025
8.
Zywiel
,
M. G.
,
Sayeed
,
S. A.
,
Johnson
,
A. J.
,
Schmalzried
,
T. P.
, and
Mont
,
M. A.
,
2011
, “
Survival of Hard-on-Hard Bearings in Total Hip Arthroplasty: A Systematic Review
,”
Clin. Orthop. Relat. Res.
,
469
(
6
), pp.
1536
1546
. 10.1007/s11999-010-1658-0
9.
Rajaee
,
S. S.
,
Theriault
,
R. V.
,
Pevear
,
M. E.
, and
Smith
,
E. L.
,
2016
, “
National Trends in Primary Total Hip Arthroplasty in Extremely Young Patients: A Focus on Bearing Surface Usage From 2009 to 2012
,”
J. Arthroplasty
,
31
(
9
), pp.
63
68
. 10.1016/j.arth.2016.01.061
10.
Vendittoli
,
P.-A.
,
Mottard
,
S.
,
Roy
,
A. G.
,
Dupont
,
C.
, and
Lavigne
,
M.
,
2007
, “
Chromium and Cobalt Ion Release Following the Durom High Carbon Content, Forged Metal-on-Metal Surface Replacement of the Hip
,”
J. Bone Jt. Surg.
,
89
(
4
), pp.
441
448
. 10.1302/0301-620X.89B4.18054
11.
Bosker
,
B. H.
,
Ettema
,
H. B.
,
Boomsma
,
M. F.
,
Kollen
,
B. J.
,
Maas
,
M.
, and
Verheyen
,
C. C. P. M.
,
2012
, “
High Incidence of Pseudotumour Formation After Large-Diameter Metal-on-Metal Total Hip Replacement
,”
J. Bone Jt. Surg.
,
94-B
(
6
), pp.
755
761
. 10.1302/0301-620X.94B6.28373
12.
Owen
,
D. H.
,
Russell
,
N. C.
,
Smith
,
P. N.
, and
Walter
,
W. L.
,
2014
, “
An Estimation of the Incidence of Squeaking and Revision Surgery for Squeaking in Ceramic-on-Ceramic Total Hip Replacement
,”
Bone Joint J.
,
96-B
(
2
), pp.
181
187
. 10.1302/0301-620X.96B2.32784
13.
Choi
,
I. Y.
,
Kim
,
Y. S.
,
Hwang
,
K. T.
, and
Kim
,
Y. H.
,
2010
, “
Incidence and Factors Associated With Squeaking in Alumina-on-Alumina THA
,”
Clin. Orthop. Relat. Res.
,
468
(
12
), pp.
3234
3239
. 10.1007/s11999-010-1394-5
14.
Bedard
,
N. A.
,
Burnett
,
R. A.
,
DeMik
,
D. E.
,
Gao
,
Y.
,
Liu
,
S. S.
, and
Callaghan
,
J. J.
,
2017
, “
Are Trends in Total Hip Arthroplasty Bearing Surface Continuing to Change? 2007–2015 Usage in a Large Database Cohort
,”
J. Arthroplasty
,
32
(
12
), pp.
3777
3781
. 10.1016/j.arth.2017.07.044
15.
Heckmann
,
N. D.
,
Sivasundaram
,
L.
,
Stefl
,
M. D.
,
Kang
,
H. P.
,
Basler
,
E. T.
, and
Lieberman
,
J. R.
,
2018
, “
Total Hip Arthroplasty Bearing Surface Trends in the United States From 2007 to 2014: The Rise of Ceramic on Polyethylene
,”
J. Arthroplasty
,
33
(
6
), pp.
1757
1763
. 10.1016/j.arth.2017.12.040
16.
Bayliss
,
L. E.
,
Culliford
,
D.
,
Monk
,
A. P.
,
Glyn-Jones
,
S.
,
Prieto-Alhambra
,
D.
,
Judge
,
A.
,
Cooper
,
C.
,
Carr
,
A. J.
,
Arden
,
N. K.
,
Beard
,
D. J.
, and
Price
,
A. J.
,
2017
, “
The Effect of Patient Age at Intervention on Risk of Implant Revision After Total Replacement of the Hip or Knee: A Population-Based Cohort Study
,”
Lancet
,
389
(
10077
), pp.
1424
1430
. 10.1016/S0140-6736(17)30059-4
17.
Liu
,
A.
,
Richards
,
L.
,
Bladen
,
C. L.
,
Ingham
,
E.
,
Fisher
,
J.
, and
Tipper
,
J. L.
,
2015
, “
The Biological Response to Nanometre-Sized Polymer Particles
,”
Acta Biomater.
,
23
, pp.
38
51
. 10.1016/j.actbio.2015.05.016
18.
Clohisy
,
J. C.
,
Calvert
,
G.
,
Tull
,
F.
,
McDonald
,
D.
, and
Maloney
,
W. J.
,
2004
, “
Reasons for Revision Hip Surgery: A Retrospective Review
,”
Clin. Orthop. Relat. Res.
,
429
, pp.
188
192
. 10.1097/01.blo.0000150126.73024.42
19.
Muratoglu
,
O. K.
,
Bragdon
,
C. R.
,
O’Connor
,
D. O.
,
Jasty
,
M.
, and
Harris
,
W. H.
,
2001
, “
A Novel Method of Cross-Linking Ultra-High-Molecular-Weight Polyethylene to Improve Wear, Reduce Oxidation, and Retain Mechanical Properties
,”
J. Arthroplasty
,
16
(
2
), pp.
149
160
. 10.1054/arth.2001.20540
20.
Laurent
,
M. P.
,
Johnson
,
T. S.
,
Crowninshield
,
R. D.
,
Blanchard
,
C. R.
,
Bhambri
,
S. K.
, and
Yao
,
J. Q.
,
2008
, “
Characterization of a Highly Cross-Linked Ultrahigh Molecular-Weight Polyethylene in Clinical Use in Total Hip Arthroplasty
,”
J. Arthroplasty
,
23
(
5
), pp.
751
761
. 10.1016/j.arth.2007.06.006
21.
Oral
,
E.
,
Christensen
,
S. D.
,
Malhi
,
A. S.
,
Wannomae
,
K. K.
, and
Muratoglu
,
O. K.
,
2006
, “
Wear Resistance and Mechanical Properties of Highly Cross-Linked, Ultrahigh-Molecular Weight Polyethylene Doped With Vitamin E
,”
J. Arthroplasty
,
21
(
4
), pp.
580
591
. 10.1016/j.arth.2005.07.009
22.
Yamamoto
,
K.
,
Tateiwa
,
T.
, and
Takahashi
,
Y.
,
2017
, “
Vitamin E-Stabilized Highly Crosslinked Polyethylenes: The Role and Effectiveness in Total Hip Arthroplasty
,”
J. Orthop. Sci.
,
22
(
3
), pp.
384
390
. 10.1016/j.jos.2017.01.012
23.
Saikko
,
V.
,
1994
, “
Wear of Polyethylene Acetabular Cups Against Zirconia Femoral Heads Studied With a Hip Joint Simulator
,”
Wear
,
176
(
2
), pp.
207
212
. 10.1016/0043-1648(94)90148-1
24.
Rahaman
,
M. N.
,
Yao
,
A.
,
Bal
,
B. S.
,
Garino
,
J. P.
, and
Ries
,
M. D.
,
2007
, “
Ceramics for Prosthetic Hip and Knee Joint Replacement
,”
J. Am. Ceram. Soc.
,
90
(
7
), pp.
1965
1988
. 10.1111/j.1551-2916.2007.01725.x
25.
Brizuela
,
M.
,
Garcia-Luis
,
A.
,
Viviente
,
J. L.
,
Braceras
,
I.
, and
Oñate
,
J. I.
,
2002
, “
Tribological Study of Lubricious DLC Biocompatible Coatings
,”
J. Mater. Sci.: Mater. Med.
,
13
(
12
), pp.
1129
1133
. 10.1023/A:1021129718737
26.
Balagna
,
C.
,
Faga
,
M. G.
, and
Spriano
,
S.
,
2012
, “
Tantalum-Based Multilayer Coating on Cobalt Alloys in Total Hip and Knee Replacement
,”
Mater. Sci. Eng. C
,
32
(
4
), pp.
887
895
. 10.1016/j.msec.2012.02.007
27.
van Hove
,
R. P.
,
Sierevelt
,
I. N.
,
van Royen
,
B. J.
, and
Nolte
,
P. A.
,
2015
, “
Titanium-Nitride Coating of Orthopaedic Implants: A Review of the Literature
,”
Biomed Res. Int.
,
2015
, pp.
1
9
. 10.1155/2015/485975
28.
Ching
,
H. A.
,
Choudhury
,
D.
,
Nine
,
M. J.
, and
Abu Osman
,
N. A.
,
2014
, “
Effects of Surface Coating on Reducing Friction and Wear of Orthopaedic Implants
,”
Sci. Technol. Adv. Mater.
,
15
(
1
), p.
014402
. 10.1088/1468-6996/15/1/014402
29.
Ito
,
H.
,
Kaneda
,
K.
,
Yuhta
,
T.
,
Nishimura
,
I.
,
Yasuda
,
K.
, and
Matsuno
,
T.
,
2000
, “
Reduction of Polyethylene Wear by Concave Dimples on the Frictional Surface in Artificial Hip Joints
,”
J. Arthroplasty
,
15
(
3
), pp.
332
338
. 10.1016/S0883-5403(00)90670-3
30.
Sawano
,
H.
,
Warisawa
,
S.
, and
Ishihara
,
S.
,
2009
, “
Study on Long Life of Artificial Joints by Investigating Optimal Sliding Surface Geometry for Improvement in Wear Resistance
,”
Precis. Eng.
,
33
(
4
), pp.
492
498
. 10.1016/j.precisioneng.2009.01.005
31.
Cho
,
M.
, and
Choi
,
H.-J.
,
2014
, “
Optimization of Surface Texturing for Contact Between Steel and Ultrahigh Molecular Weight Polyethylene Under Boundary Lubrication
,”
Tribol. Lett.
,
56
(
3
), pp.
409
422
. 10.1007/s11249-014-0418-9
32.
Dougherty
,
P. S. M.
,
Srivastava
,
G.
,
Onler
,
R.
,
Ozdoganlar
,
O. B.
, and
Higgs
,
C. F.
,
2015
, “
Lubrication Enhancement for UHMWPE Sliding Contacts Through Surface Texturing
,”
Tribol. Trans.
,
58
(
1
), pp.
79
86
. 10.1080/10402004.2014.933935
33.
López-Cervantes
,
A.
,
Domínguez-López
,
I.
,
Barceinas-Sánchez
,
J. D. O.
, and
García-García
,
A. L.
,
2013
, “
Effects of Surface Texturing on the Performance of Biocompatible UHMWPE as a Bearing Material During in Vitro Lubricated Sliding/Rolling Motion
,”
J. Mech. Behav. Biomed. Mater.
,
20
, pp.
45
53
. 10.1016/j.jmbbm.2012.12.010
34.
Zhang
,
B.
,
Huang
,
W.
,
Wang
,
J.
, and
Wang
,
X.
,
2013
, “
Comparison of the Effects of Surface Texture on the Surfaces of Steel and UHMWPE
,”
Tribol. Int.
,
65
, pp.
138
145
. 10.1016/j.triboint.2013.01.004
35.
Zhang
,
B.
,
Huang
,
W.
, and
Wang
,
X.
,
2012
, “
Biomimetic Surface Design for Ultrahigh Molecular Weight Polyethylene to Improve the Tribological Properties
,”
Proc. Inst. Mech. Eng. Part J J. Eng. Tribol.
,
226
(
8
), pp.
705
713
. 10.1177/1350650112437829
36.
Borjali
,
A.
,
Langhorn
,
J.
,
Monson
,
K.
, and
Raeymaekers
,
B.
,
2017
, “
Using a Patterned Microtexture to Reduce Polyethylene Wear in Metal-on-Polyethylene Prosthetic Bearing Couples
,”
Wear
,
392–393
, pp.
77
83
. 10.1016/j.wear.2017.09.014
37.
Langhorn
,
J.
,
Borjali
,
A.
,
Hippensteel
,
E.
,
Nelson
,
W.
, and
Raeymaekers
,
B.
,
2018
, “
Microtextured CoCrMo Alloy for Use in Metal-on-Polyethylene Prosthetic Joint Bearings: Multi-Directional Wear and Corrosion Measurements
,”
Tribol. Int.
,
124
, pp.
178
183
. 10.1016/j.triboint.2018.04.007
38.
Borjali
,
A.
,
Monson
,
K.
, and
Raeymaekers
,
B.
,
2018
, “
Friction Between a Polyethylene Pin and a Microtextured CoCrMo Disc, and Its Correlation to Polyethylene Wear, as a Function of Sliding Velocity and Contact Pressure, in the Context of Metal-on-Polyethylene Prosthetic Hip Implants
,”
Tribol. Int.
,
127
, pp.
568
574
. 10.1016/j.triboint.2018.07.005
39.
Chyr
,
A.
,
Qiu
,
M.
,
Speltz
,
J. W.
,
Jacobsen
,
R. L.
,
Sanders
,
A. P.
, and
Raeymaekers
,
B.
,
2014
, “
A Patterned Microtexture to Reduce Friction and Increase Longevity of Prosthetic Hip Joints
,”
Wear
,
315
, pp.
51
57
. 10.1016/j.wear.2014.04.001
40.
Choudhury
,
D.
,
Vrbka
,
M.
,
Mamat
,
A.
,
Stavness
,
I.
,
Roy
,
C. K.
,
Mootanah
,
R.
, and
Krupka
,
I.
,
2017
, “
The Impact of Surface and Geometry on Coefficient of Friction of Artificial Hip Joints
,”
J. Mech. Behav. Biomed. Mater.
,
72
, pp.
192
199
. 10.1016/j.jmbbm.2017.05.011
41.
Choudhury
,
D.
,
Rebenda
,
D.
,
Sasaki
,
S.
,
Hekrle
,
P.
,
Vrbka
,
M.
, and
Zou
,
M.
,
2018
, “
Enhanced Lubricant Film Formation Through Micro-Dimpled Hard-on-Hard Artificial Hip Joint: An in-Situ Observation of Dimple Shape Effects
,”
J. Mech. Behav. Biomed. Mater.
,
81
, pp.
120
129
. 10.1016/j.jmbbm.2018.02.014
42.
Choudhury
,
D.
,
Urban
,
F.
,
Vrbka
,
M.
,
Hartl
,
M.
, and
Krupka
,
I.
,
2015
, “
A Novel Tribological Study on DLC-Coated Micro-Dimpled Orthopedics Implant Interface
,”
J. Mech. Behav. Biomed. Mater.
,
45
, pp.
121
131
. 10.1016/j.jmbbm.2014.11.028
43.
Qiu
,
M.
,
Bailey
,
B. N.
,
Stoll
,
R.
, and
Raeymaekers
,
B.
,
2014
, “
The Accuracy of the Compressible Reynolds Equation for Predicting the Local Pressure in Gas-Lubricated Textured Parallel Slider Bearings
,”
Tribol. Int.
,
72
, pp.
83
89
. 10.1016/j.triboint.2013.12.008
44.
Shinkarenko
,
A.
,
Kligerman
,
Y.
, and
Etsion
,
I.
,
2009
, “
The Effect of Surface Texturing in Soft Elasto-Hydrodynamic Lubrication
,”
Tribol. Int.
,
42
, pp.
284
292
. 10.1016/j.triboint.2008.06.008
45.
Zhang
,
H.
,
Hua
,
M.
,
Dong
,
G. N.
,
Zhang
,
D. Y.
, and
Chin
,
K. S.
,
2016
, “
A Mixed Lubrication Model for Studying Tribological Behaviors of Surface Texturing
,”
Tribol. Int.
,
93
, pp.
583
592
. 10.1016/j.triboint.2015.03.027
46.
Wang
,
X.
,
Wang
,
J.
,
Zhang
,
B.
, and
Huang
,
W.
,
2015
, “
Design Principles for the Area Density of Dimple Patterns
,”
Proc. Inst. Mech. Eng. Part J J. Eng. Tribol.
,
229
(
4
), pp.
538
546
. 10.1177/1350650114531939
47.
Su
,
B.
,
Huang
,
L.
,
Huang
,
W.
, and
Wang
,
X.
,
2017
, “
The Load Carrying Capacity of Textured Sliding Bearings With Elastic Deformation
,”
Tribol. Int.
,
109
, pp.
86
96
. 10.1016/j.triboint.2016.11.030
48.
Qiu
,
M.
,
Minson
,
B. R.
, and
Raeymaekers
,
B.
,
2013
, “
The Effect of Texture Shape on the Friction Coefficient and Stiffness of Gas-Lubricated Parallel Slider Bearings
,”
Tribol. Int.
,
67
, pp.
278
288
. 10.1016/j.triboint.2013.08.004
49.
Zhang
,
Y. L.
,
Zhang
,
X. G.
, and
Matsoukas
,
G.
,
2015
, “
Numerical Study of Surface Texturing for Improving Tribological Properties of Ultra-High Molecular Weight Polyethylene
,”
Biosurf. Biotribol.
,
1
(
4
), pp.
270
277
. 10.1016/j.bsbt.2015.11.003
50.
Sahlin
,
F.
,
Glavatskih
,
S. B.
,
Almqvist
,
T.
, and
Larsson
,
R.
,
2005
, “
Two-Dimensional CFD-Analysis of Micro-Patterned Surfaces in Hydrodynamic Lubrication
,”
ASME J. Tribol.
,
127
(
1
), pp.
96
102
. 10.1115/1.1828067
51.
Han
,
J.
,
Fang
,
L.
,
Sun
,
J.
, and
Ge
,
S.
,
2010
, “
Hydrodynamic Lubrication of Microdimple Textured Surface Using Three-Dimensional CFD
,”
Tribol. Trans.
,
53
(
6
), pp.
860
870
. 10.1080/10402004.2010.496070
52.
Gao
,
L.
,
Yang
,
P.
,
Dymond
,
I.
,
Fisher
,
J.
, and
Jin
,
Z.
,
2010
, “
Effect of Surface Texturing on the Elastohydrodynamic Lubrication Analysis of Metal-on-Metal Hip Implants
,”
Tribol. Int.
,
43
, pp.
1851
1860
. 10.1016/j.triboint.2010.02.006
53.
Gao
,
L. M.
,
Meng
,
Q. E.
,
Liu
,
F.
,
Fisher
,
J.
,
Jin
,
Z. M.
, and
Hooke
,
C. J.
,
2010
, “
The Effect of Aspherical Geometry and Surface Texturing on the Elastohydrodynamic Lubrication of Metal-on-Metal Hip Prostheses Under Physiological Loading and Motions
,”
Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci.
,
224
(
12
), pp.
2627
2636
. 10.1243/09544062JMES2193
54.
de Vicente
,
J.
,
Stokes
,
J. R.
, and
Spikes
,
H. A.
,
2005
, “
The Frictional Properties of Newtonian Fluids in Rolling—Sliding Soft-EHL Contact
,”
Tribol. Lett.
,
20
(
3–4
), pp.
273
286
. 10.1007/s11249-005-9067-3
55.
Hooke
,
C. J.
, and
O’Donoghue
,
J. P.
,
1972
, “
Elastohydrodynamic Lubrication of Soft Highly Deformed Contacts
,”
J. Mech. Eng. Sci.
,
14
(
1
), pp.
34
48
. 10.1243/JMES_JOUR_1972_014_008_02
56.
Adams
,
M. J.
,
Briscoe
,
B. J.
, and
Johnson
,
S. A.
,
2007
, “
Friction and Lubrication of Human Skin
,”
Tribol. Lett.
,
26
(
3
), pp.
239
253
. 10.1007/s11249-007-9206-0
57.
Jones
,
M. B.
,
Fulford
,
G. R.
,
Please
,
C. P.
,
McElwain
,
D. L. S.
, and
Collins
,
M. J.
,
2008
, “
Elastohydrodynamics of the Eyelid Wiper
,”
Bull. Math. Biol.
,
70
(
2
), pp.
323
343
. 10.1007/s11538-007-9252-7
58.
Stupkiewicz
,
S.
,
2009
, “
Finite Element Treatment of Soft Elastohydrodynamic Lubrication Problems in the Finite Deformation Regime
,”
Comput. Mech.
,
44
(
5
), pp.
605
619
. 10.1007/s00466-009-0394-3
59.
Stupkiewicz
,
S.
,
Lengiewicz
,
J.
,
Sadowski
,
P.
, and
Kucharski
,
S.
,
2016
, “
Finite Deformation Effects in Soft Elastohydrodynamic Lubrication Problems
,”
Tribol. Int.
,
93
, pp.
511
522
. 10.1016/j.triboint.2015.03.016
60.
Zhao
,
B.
,
Zhang
,
B.
, and
Zhang
,
K.
,
2019
, “
Modelling Three-Dimensional Soft Elastohydrodynamic Lubrication Contact of Heterogeneous Materials
,”
Tribol. Int.
,
129
, pp.
377
389
. 10.1016/j.triboint.2018.08.042
61.
Shinkarenko
,
A.
,
Kligerman
,
Y.
, and
Etsion
,
I.
,
2009
, “
The Validity of Linear Elasticity in Analyzing Surface Texturing Effect for Elastohydrodynamic Lubrication
,”
ASME J. Tribol.
,
131
(
2
), p.
021503
. 10.1115/1.3071973
62.
Shinkarenko
,
A.
,
Kligerman
,
Y.
, and
Etsion
,
I.
,
2009
, “
The Effect of Elastomer Surface Texturing in Soft Elasto-Hydrodynamic Lubrication
,”
Tribol. Lett.
,
36
(
2
), pp.
95
103
. 10.1007/s11249-009-9464-0
63.
Qiu
,
M.
,
Chyr
,
A.
,
Sanders
,
A. P.
, and
Raeymaekers
,
B.
,
2014
, “
Designing Prosthetic Knee Joints With Bio-Inspired Bearing Surfaces
,”
Tribol. Int.
,
77
, pp.
106
110
. 10.1016/j.triboint.2014.04.025
64.
Qiu
,
M.
, and
Raeymaekers
,
B.
,
2015
, “
The Load-Carrying Capacity and Friction Coefficient of Incompressible Textured Parallel Slider Bearings With Surface Roughness Inside the Texture Features
,”
Proc. Inst. Mech. Eng. Part J J. Eng. Tribol.
,
229
(
4
), pp.
547
556
. 10.1177/1350650114545352
65.
Venner
,
C. H.
, and
Lubrecht
,
A. A.
,
2000
,
Multilevel Methods in Lubrication
,
Elsevier
,
New York
.
66.
Bergström
,
J. S.
,
Kurtz
,
S. M.
,
Rimnac
,
C. M.
, and
Edidin
,
A. A.
,
2002
, “
Constitutive Modeling of Ultra-High Molecular Weight Polyethylene Under Large-Deformation and Cyclic Loading Conditions
,”
Biomaterials
,
23
(
11
), pp.
2329
2343
. 10.1016/S0142-9612(01)00367-2
67.
Wang
,
F. C.
, and
Jin
,
Z. M.
,
2005
, “
Elastohydrodynamic Lubrication Modeling of Artificial Hip Joints Under Steady-State Conditions
,”
ASME J. Tribol.
,
127
(
4
), pp.
729
739
. 10.1115/1.1924460
68.
Wang
,
F. C.
,
Liu
,
F.
, and
Jin
,
Z. M.
,
2004
, “
A General Elastohydrodynamic Lubrication Analysis of Artificial Hip Joints Employing a Compliant Layered Socket Under Steady State Rotation
,”
Proc. Inst. Mech. Eng. Part H J. Eng. Med.
,
218
(
5
), pp.
283
291
. 10.1243/0954411041932836
69.
2000
,
ASTM F732-17: Standard Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prosthesis
,
ASTM International
,
West Conshohocken, PA
.
70.
Saikko
,
V.
,
2017
, “
Effect of Contact Area on the Wear and Friction of UHMWPE in Circular Translation Pin-on-Disk Tests
,”
ASME J. Tribol.
,
139
(
6
), p.
061606
. 10.1115/1.4036448
71.
Ma
,
C.
, and
Zhu
,
H.
,
2011
, “
An Optimum Design Model for Textured Surface with Elliptical-Shape Dimples Under Hydrodynamic Lubrication
,”
Tribol. Int.
,
44
, pp.
987
995
. 10.1016/j.triboint.2011.04.005
72.
Codrignani
,
A.
,
Frohnapfel
,
B.
,
Magagnato
,
F.
,
Schreiber
,
P.
,
Schneider
,
J.
, and
Gumbsch
,
P.
,
2018
, “
Numerical and Experimental Investigation of Texture Shape and Position in the Macroscopic Contact
,”
Tribol. Int.
,
122
, pp.
46
57
. 10.1016/j.triboint.2018.02.001
73.
Mattei
,
L.
,
Di Puccio
,
F.
,
Piccigallo
,
B.
, and
Ciulli
,
E.
,
2011
, “
Lubrication and Wear Modelling of Artificial Hip Joints: A Review
,”
Tribol. Int.
,
44
, pp.
532
549
. 10.1016/j.triboint.2010.06.010
74.
Gao
,
L.
,
Dowson
,
D.
, and
Hewson
,
R. W.
,
2016
, “
A Numerical Study of Non-Newtonian Transient Elastohydrodynamic Lubrication of Metal-on-Metal Hip Prostheses
,”
Tribol. Int.
,
93
, pp.
486
494
. 10.1016/j.triboint.2015.03.003
75.
Dobrica
,
M. B.
,
Fillon
,
M.
,
Pascovici
,
M. D.
, and
Cicone
,
T.
,
2010
, “
Optimizing Surface Texture for Hydrodynamic Lubricated Contacts Using a Mass-Conserving Numerical Approach
,”
Proc. Inst. Mech. Eng. Part J J. Eng. Tribol.
,
224
(
8
), pp.
737
750
. 10.1243/13506501JET673
76.
Nečas
,
D.
,
Vrbka
,
M.
,
Galandáková
,
A.
,
Křupka
,
I.
, and
Hartl
,
M.
,
2019
, “
On the Observation of Lubrication Mechanisms Within Hip Joint Replacements. Part I: Hard-on-Soft Bearing Pairs
,”
J. Mech. Behav. Biomed. Mater.
,
89
, pp.
237
248
. 10.1016/j.jmbbm.2018.09.022
77.
Ghosh
,
S.
,
Choudhury
,
D.
,
Roy
,
T.
,
Moradi
,
A.
,
Masjuki
,
H. H.
, and
Pingguan-Murphy
,
B.
,
2015
, “
Tribological Performance of the Biological Components of Synovial Fluid in Artificial Joint Implants
,”
Sci. Technol. Adv. Mater.
,
16
(
4
), p.
045002
. 10.1088/1468-6996/16/4/045002
78.
Myant
,
C.
,
Underwood
,
R.
,
Fan
,
J.
, and
Cann
,
P. M.
,
2012
, “
Lubrication of Metal-on-Metal Hip Joints: The Effect of Protein Content and Load on Film Formation and Wear
,”
J. Mech. Behav. Biomed. Mater.
,
6
, pp.
30
40
. 10.1016/j.jmbbm.2011.09.008
79.
Stevenson
,
H.
,
Jaggard
,
M.
,
Akhbari
,
P.
,
Vaghela
,
U.
,
Gupte
,
C.
, and
Cann
,
P.
,
2019
, “
The Role of Denatured Synovial Fluid Proteins in the Lubrication of Artificial Joints
,”
Biotribology
,
17
, pp.
49
63
. 10.1016/j.biotri.2019.03.003
80.
Qiu
,
Y.
, and
Khonsari
,
M. M.
,
2009
, “
On the Prediction of Cavitation in Dimples Using a Mass-Conservative Algorithm
,”
ASME J. Tribol.
,
131
(
4
), p.
041702
. 10.1115/1.3176994
81.
Ausas
,
R.
,
Ragot
,
P.
,
Leiva
,
J.
,
Jai
,
M.
,
Bayada
,
G.
, and
Buscaglia
,
G. C.
,
2007
, “
The Impact of the Cavitation Model in the Analysis of Microtextured Lubricated Journal Bearings
,”
ASME J. Tribol.
,
129
(
4
), pp.
868
875
. 10.1115/1.2768088
82.
Henry
,
Y.
,
Bouyer
,
J.
, and
Fillon
,
M.
,
2015
, “
An Experimental Analysis of the Hydrodynamic Contribution of Textured Thrust Bearings During Steady-State Operation: A Comparison with the Untextured Parallel Surface Configuration
,”
Proc. Inst. Mech. Eng. Part J J. Eng. Tribol.
,
229
(
4
), pp.
362
375
. 10.1177/1350650114537484
83.
Moghadam
,
M. N.
,
Abdel-Sayed
,
P.
,
Camine
,
V. M.
, and
Pioletti
,
D. P.
,
2015
, “
Impact of Synovial Fluid Flow on Temperature Regulation in Knee Cartilage
,”
J. Biomech.
,
48
(
2
), pp.
370
374
. 10.1016/j.jbiomech.2014.11.008
84.
Meng
,
X.
, and
Khonsari
,
M. M.
,
2018
, “
Viscosity Wedge Effect of Dimpled Surfaces Considering Cavitation Effect
,”
Tribol. Int.
,
122
, pp.
58
66
. 10.1016/j.triboint.2018.02.011
85.
Basri
,
H.
,
Syahrom
,
A.
,
Ramadhoni
,
T. S.
,
Prakoso
,
A. T.
,
Ammarullah
,
M. I.
, and
Vincent
,
2019
, “
The Analysis of the Dimple Arrangement of the Artificial Hip Joint to the Performance of Lubrication
,”
IOP Conf. Ser.: Mater. Sci. Eng.
,
620
(
1
), p.
012116
. 10.1088/1757-899X/620/1/012116
86.
Gao
,
L.
,
De Boer
,
G.
, and
Hewson
,
R.
,
2013
, “
A Multiscale Framework for Lubrication Analysis of Bearings With Textured Surface
,”
Advances in Structural Engineering and Mechanics
,
Jeju, Korea
,
Sept. 8–12
, pp.
959
967
.
You do not currently have access to this content.