Local adiabatic film cooling effectiveness on a flat plate surface downstream a row of cylindrical holes was investigated. Geometric parameters such as blowing angle and hole pitch, as well as the flow parameters blowing rate and density ratio, were varied in a wide range emphasizing engine relevant conditions. IR thermography was used to perform local measurements of the surface temperature field. A spatial resolution of up to seven data points per hole diameter extending to 80 hole diameters downstream of the ejection location was achieved. Since all technical wall materials have a finite thermoconductivity, a procedure for correcting the measured surface temperature data based on a Finite Element analysis was developed. Heat loss over the back and remnant heat flux within the test plate in lateral and streamwise directions were taken into account. The local effectiveness patterns obtained are systematically analyzed to quantify the influence of the various parameters. As a result, a detailed description of the characteristics of local adiabatic film cooling effectiveness is given. Furthermore, the locally resolved experimental results can serve as a data base for the validation of CFD codes predicting discrete hole film cooling.
Skip Nav Destination
Article navigation
October 2001
Technical Papers
High-Resolution Measurements of Local Effectiveness From Discrete Hole Film Cooling
S. Baldauf,
S. Baldauf
Lehrstuhl und Institut fu¨r Thermische Stro¨mungsmaschinen, Universita¨t Karlsruhe (TH), 76128 Karlsruhe, Germany
Search for other works by this author on:
A. Schulz,
A. Schulz
Lehrstuhl und Institut fu¨r Thermische Stro¨mungsmaschinen, Universita¨t Karlsruhe (TH), 76128 Karlsruhe, Germany
Search for other works by this author on:
S. Wittig
S. Wittig
Lehrstuhl und Institut fu¨r Thermische Stro¨mungsmaschinen, Universita¨t Karlsruhe (TH), 76128 Karlsruhe, Germany
Search for other works by this author on:
S. Baldauf
Lehrstuhl und Institut fu¨r Thermische Stro¨mungsmaschinen, Universita¨t Karlsruhe (TH), 76128 Karlsruhe, Germany
A. Schulz
Lehrstuhl und Institut fu¨r Thermische Stro¨mungsmaschinen, Universita¨t Karlsruhe (TH), 76128 Karlsruhe, Germany
S. Wittig
Lehrstuhl und Institut fu¨r Thermische Stro¨mungsmaschinen, Universita¨t Karlsruhe (TH), 76128 Karlsruhe, Germany
Contributed by the International Gas Turbine Institute and presented at the 44th International Gas Turbine and Aeroengine Congress and Exhibition, Indianapolis, Indiana, June 7–10, 1999. Manuscript received by the International Gas Turbine Institute February 1999. Paper No. 99-GT-46. Review Chair: D. C. Wisler.
J. Turbomach. Oct 2001, 123(4): 758-765 (8 pages)
Published Online: February 1, 1999
Article history
Received:
February 1, 1999
Citation
Baldauf , S., Schulz , A., and Wittig, S. (February 1, 1999). "High-Resolution Measurements of Local Effectiveness From Discrete Hole Film Cooling ." ASME. J. Turbomach. October 2001; 123(4): 758–765. https://doi.org/10.1115/1.1371778
Download citation file:
Get Email Alerts
The Cooling Effect of Combustor Exit Louver Scheme on a Transonic Nozzle Guide Vane Endwall
J. Turbomach (July 2025)
Aerodynamic Performance Evaluation of Subsonic Compressor Cascade Blade With Leading-Edge Damage
J. Turbomach (July 2025)
Thermohydraulic Performance and Flow Structures of Diamond Pyramid Arrays
J. Turbomach (July 2025)
Related Articles
High-Resolution Measurements of Local Heat Transfer Coefficients From Discrete Hole Film Cooling
J. Turbomach (October,2001)
Aerodynamic and
Endwall Film-Cooling Investigations of a Gas Turbine Nozzle Guide Vane Applying
Temperature-Sensitive Paint
J. Turbomach (July,2011)
Correlation of Film-Cooling Effectiveness From Thermographic Measurements at Enginelike Conditions
J. Turbomach (October,2002)
A Detailed Analysis of Film Cooling Physics: Part III— Streamwise Injection With Shaped Holes
J. Turbomach (January,2000)
Related Proceedings Papers
Related Chapters
Control and Operational Performance
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
Thermodynamic Performance
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
Finite Element Solution of Natural Convection Flow of a Nanofluid along a Vertical Flat Plate with Streamwise Sinusoidal Surface Temperature
International Conference on Computer and Electrical Engineering 4th (ICCEE 2011)