In recent years, transient response analysis of energy systems is becoming more and more important in optimizing plant operation and control. Furthermore, dynamic analyses are also used to integrate steady-state diagnostic analyses, since they allow the detection of malfunctions characterized by time-dependent effects. The paper deals with the development of a nonlinear modular model for compressor dynamic simulation. After developing the compressor mathematical model through a physics-based approach (laws of conservation and thermal balances), the model is implemented through the MATLAB® SIMULINK® tool. Then, a sensitivity analysis is carried out to evaluate the influence of model parameters on the model response. Finally, the model is calibrated on a multistage axial-centrifugal small size compressor running in the test facility of the University of Ferrara (Italy) and validated through experimental data taken on the compressor under investigation.
Skip Nav Destination
Article navigation
July 2005
Technical Papers
Development and Experimental Validation of a Compressor Dynamic Model
M. Venturini
M. Venturini
ENDIF - University of Ferrara
, Via Saragat, 1, 44100 Ferrara, Italy
Search for other works by this author on:
M. Venturini
ENDIF - University of Ferrara
, Via Saragat, 1, 44100 Ferrara, ItalyJ. Turbomach. Jul 2005, 127(3): 599-608 (10 pages)
Published Online: March 1, 2004
Article history
Received:
October 1, 2003
Revised:
March 1, 2004
Citation
Venturini, M. (March 1, 2004). "Development and Experimental Validation of a Compressor Dynamic Model." ASME. J. Turbomach. July 2005; 127(3): 599–608. https://doi.org/10.1115/1.1928935
Download citation file:
Get Email Alerts
Related Articles
Investigation of Cooling Effectiveness of Gas Turbine Inlet Fogging Location Relative to the Silencer
J. Eng. Gas Turbines Power (February,2012)
Compressor Fouling Modeling: Relationship Between Computational Roughness and Gas Turbine Operation Time
J. Eng. Gas Turbines Power (May,2012)
An Integrated System for the Aerodynamic Design of Compression Systems—Part II: Application
J. Turbomach (January,2011)
The Aerothermopressor—A Device for Improving the Performance of a Gas-Turbine Power Plant
Trans. ASME (April,1956)
Related Proceedings Papers
Related Chapters
Control and Operational Performance
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
Alternative Systems
Turbo/Supercharger Compressors and Turbines for Aircraft Propulsion in WWII: Theory, History and Practice—Guidance from the Past for Modern Engineers and Students
Other Components and Variations
Axial-Flow Compressors