Skip Nav Destination
Issues
April 2007
ISSN 0889-504X
EISSN 1528-8900
In this Issue
Technology Review
Gas Turbine Heat Transfer: Ten Remaining Hot Gas Path Challenges
J. Turbomach. April 2007, 129(2): 193–201.
doi: https://doi.org/10.1115/1.2464142
Topics:
Cooling
,
Turbines
,
Gas turbines
,
Flow (Dynamics)
,
Film cooling
,
Heat transfer
,
Design
,
Airfoils
Technical Papers
High-Resolution Film Cooling Effectiveness Comparison of Axial and Compound Angle Holes on the Suction Side of a Turbine Vane
J. Turbomach. April 2007, 129(2): 202–211.
doi: https://doi.org/10.1115/1.2448016
Topics:
Coolants
,
Cooling
,
Film cooling
,
Flat plates
,
Suction
,
Turbines
,
Turbulence
,
Density
,
Resolution (Optics)
End-Wall Film Cooling Through Fan-Shaped Holes With Different Area Ratios
J. Turbomach. April 2007, 129(2): 212–220.
doi: https://doi.org/10.1115/1.2464140
Topics:
Coolants
,
Flow (Dynamics)
,
Cooling
,
Geometry
,
Momentum
,
Film cooling
,
Cascades (Fluid dynamics)
Effect of Jet Pulsing on Film Cooling—Part I: Effectiveness and Flow-Field Temperature Results
J. Turbomach. April 2007, 129(2): 232–246.
doi: https://doi.org/10.1115/1.2437231
Topics:
Cycles
,
Film cooling
,
Flow (Dynamics)
,
Jets
,
Temperature
,
Valves
Effect of Jet Pulsing on Film Cooling—Part II: Heat Transfer Results
J. Turbomach. April 2007, 129(2): 247–257.
doi: https://doi.org/10.1115/1.2437230
Topics:
Cycles
,
Film cooling
,
Flow (Dynamics)
,
Jets
,
Heat transfer
,
Valves
,
Heat flux
,
Vortices
,
Cooling
,
Engines
Three-Dimensional Flow Prediction and Improvement of Holes Arrangement of a Film-Cooled Turbine Blade Using a Feature-Based Jet Model
J. Turbomach. April 2007, 129(2): 258–268.
doi: https://doi.org/10.1115/1.2437778
Topics:
Blades
,
Coolants
,
Film cooling
,
Flow (Dynamics)
,
Pressure
,
Turbine blades
,
Jets
Separate Effects of Mach Number and Reynolds Number on Jet Array Impingement Heat Transfer
J. Turbomach. April 2007, 129(2): 269–280.
doi: https://doi.org/10.1115/1.2437774
Topics:
Discharge coefficient
,
Flow (Dynamics)
,
Heat transfer
,
Jets
,
Mach number
,
Reynolds number
,
Temperature
,
Pressure
Experimental and Numerical Study of Mass/Heat Transfer on an Airfoil Trailing-Edge Slots and Lands
J. Turbomach. April 2007, 129(2): 281–293.
doi: https://doi.org/10.1115/1.2436898
High-Resolution Film Cooling Effectiveness Measurements of Axial Holes Embedded in a Transverse Trench With Various Trench Configurations
J. Turbomach. April 2007, 129(2): 294–302.
doi: https://doi.org/10.1115/1.2464141
Topics:
Coolants
,
Cooling
,
Film cooling
,
Resolution (Optics)
,
Turbulence
,
Flow (Dynamics)
,
Heat conduction
,
Density
,
Separation (Technology)
,
Turbines
The Interaction of Turbine Inter-Platform Leakage Flow With the Mainstream Flow
J. Turbomach. April 2007, 129(2): 303–310.
doi: https://doi.org/10.1115/1.2162592
Topics:
Annulus
,
Computational fluid dynamics
,
Flow (Dynamics)
,
Leakage
,
Leakage flows
,
Nozzle guide vanes
,
Turbines
,
Blades
The Boundary Layer Over Turbine Blade Models With Realistic Rough Surfaces
J. Turbomach. April 2007, 129(2): 318–330.
doi: https://doi.org/10.1115/1.2218572
Topics:
Boundary layers
,
Surface roughness
,
Turbulence
,
Flow (Dynamics)
Film Effectiveness Performance of an Arrowhead-Shaped Film-Cooling Hole Geometry
J. Turbomach. April 2007, 129(2): 331–339.
doi: https://doi.org/10.1115/1.2437781
Topics:
Airfoils
,
Coolants
,
Film cooling
,
Flow (Dynamics)
,
Geometry
,
Pressure
,
Suction
Separation and Transition Control on an Aft-Loaded Ultra-High-Lift LP Turbine Blade at Low Reynolds Numbers: High-Speed Validation
J. Turbomach. April 2007, 129(2): 340–347.
doi: https://doi.org/10.1115/1.2437220
Topics:
Blades
,
Finishes
,
Flow (Dynamics)
,
Reynolds number
,
Separation (Technology)
,
Surface roughness
,
Wakes
,
Inflow
,
Bubbles
,
Mach number
Unsteady Flow Physics and Performance of a One-and--Stage Unshrouded High Work Turbine
J. Turbomach. April 2007, 129(2): 348–359.
doi: https://doi.org/10.1115/1.2447707
Unsteady Flow Field of an Axial-Flow Turbine Rotor at a Low Reynolds Number
J. Turbomach. April 2007, 129(2): 360–371.
doi: https://doi.org/10.1115/1.2464143
Topics:
Flow (Dynamics)
,
Nozzles
,
Rotors
,
Turbines
,
Turbulence
,
Vortices
,
Unsteady flow
,
Boundary layers
,
Wakes
,
Suction
Experimental Investigations of Clocking in a One-and-a-Half-Stage Transonic Turbine Using Laser Doppler Velocimetry and a Fast Response Aerodynamic Pressure Probe
J. Turbomach. April 2007, 129(2): 372–381.
doi: https://doi.org/10.1115/1.2464144
Topics:
Blades
,
Flow (Dynamics)
,
Laser Doppler anemometry
,
Pressure
,
Probes
,
Rotors
,
Turbines
,
Wakes
,
Turbulence
Experimental Evaluation of an Inlet Profile Generator for High-Pressure Turbine Tests
J. Turbomach. April 2007, 129(2): 382–393.
doi: https://doi.org/10.1115/1.2436897
Topics:
Combustion chambers
,
Flow (Dynamics)
,
Generators
,
Pressure
,
Temperature
,
Temperature profiles
,
Turbines
,
Turbulence
,
Film cooling
,
Heat transfer
Movement of Deposited Water on Turbomachinery Rotor Blade Surfaces
J. Turbomach. April 2007, 129(2): 394–403.
doi: https://doi.org/10.1115/1.2437780
Topics:
Blades
,
Friction
,
Water
,
Rotors
,
Flow (Dynamics)
,
Turbomachinery
The Effect of Stagger Variability in Gas Turbine Fan Assemblies
J. Turbomach. April 2007, 129(2): 404–411.
doi: https://doi.org/10.1115/1.2437776
Topics:
Blades
,
Flow (Dynamics)
,
Manufacturing
,
Gas turbines
,
Stress
,
Pressure
Multibladerow Forced Response Modeling in Axial-Flow Core Compressors
J. Turbomach. April 2007, 129(2): 412–420.
doi: https://doi.org/10.1115/1.2436892
Topics:
Blades
,
Compressors
,
Computation
,
Excitation
,
Flow (Dynamics)
,
Vibration
,
Damping
,
Engines
,
Stators
,
Modeling
Numerical Investigation of the Effect of Different Back Sweep Angle and Exducer Width on the Impeller Outlet Flow Pattern of a Centrifugal Compressor With Vaneless Diffuser
J. Turbomach. April 2007, 129(2): 421–433.
doi: https://doi.org/10.1115/1.2447873
Topics:
Flow (Dynamics)
,
Impellers
,
Computational fluid dynamics
Technical Papers
Modeling of Film Cooling—Part II: Model for Use in Three-Dimensional Computational Fluid Dynamics
J. Turbomach. April 2007, 129(2): 221–231.
doi: https://doi.org/10.1115/1.2437219
Topics:
Computational fluid dynamics
,
Film cooling
,
Flow (Dynamics)
,
Coolants
,
Aerodynamics
,
Pressure
,
Modeling
Large Eddy Simulation of Transitional Boundary Layers at High Free-Stream Turbulence Intensity and Implications for RANS Modeling
J. Turbomach. April 2007, 129(2): 311–317.
doi: https://doi.org/10.1115/1.2436896
Email alerts
RSS Feeds
Investigating the Unsteady Dynamics of a Multi-Jet Impingement Cooling Flow Using Large Eddy Simulation
J. Turbomach (March 2025)
Impacts of Material and Machine on the Variation of Additively Manufactured Cooling Channels
J. Turbomach (March 2025)
Scaling Heat Transfer and Pressure Losses of Novel Additively Manufactured Rib Designs
J. Turbomach (March 2025)