This paper considers a passive damping method that can be applied to beam-like structures such as machine tool bases and columns. The method uses viscoelastic materials to dissipate energy in the manner of classic constrained-layer damping; however, the layers are embedded within the structure as opposed to being applied externally. This provides a robust means of incorporating damping without encountering several of the common disadvantages associated with external damping treatments. An analytical solution to the amount of damping that can be achieved using embedded layers is available, but is known to be inaccurate when the viscoelastic stiffness approaches that of the structural components. Therefore, a new prediction of the maximum damping level that can be expected in a structure is developed and presented here. This prediction gives good results in a wide variety of applications, and offers insight into the relationship between key design parameters. Finite element and experimental verification of the maximum damping predictor are also presented.

Issue Section:
Research Papers
Topics:
Damping, Viscoelastic materials, Waves, Design, Finite element analysis, Machine tools, Passive damping, Stiffness, Structural elements (Construction)
1.
DiTaranto
R. A.
, and
Blasingame
W.
,
1965
, “
Composite Loss Factors of Selected Laminated Beams
,”
Journal of the Acoustical Society of America
, Vol.
40
, pp.
187
–
194
.
2.
Johnson
C.
, and
Kienholz
D.
,
1982
, “
Finite Element Prediction of Damping in Structures with Constrained Viscoelastic Layers
,”
American Institute of Aeronautics and Astronautics
, Vol.
20
, pp.
1284
–
1290
.
3.
Kerwin
E.
,
1959
, “
Damping of Flexural Waves by a Constrained Viscoelastic Layer
,”
Journal of the Acoustical Society of America
, Vol.
31
, pp.
952
–
962
.
4.
Lalanne
M.
,
Paulard
M.
, and
Trumpette
P.
,
1975
, “
Response of Thick Structures Damped by Viscoelastic Material with Application to Layered Beams and Plates
,”
Shock and Vibration Digest
, Vol.
45
, pp.
65
–
72
.
5.
Marsh, E., “An Integrated Approach to Structural Damping,” MIT Ph.D. Thesis, 1994.
6.
Marsh, E., and Hale, L., “Damping Machine Tools with Imbedded Viscoelastic Materials Constrained by Shear Tubes,” Proc. ASME 15th Biennial Conf. on Vibration and Noise, Boston, MA, 1995.
7.
Nashif, A., Jones, D. L G., and Henderson, J., 1985, Vibration Damping, John Wiley & Sons, New York.
8.
Ross, D., Ungar, E., and Kerwin, E., 1959, “Damping of Plate Flexural Vibrations by Means of Viscoelastic Laminae,” Proc. Colloq. Structural Damping, ASME.
9.
Scagnetti, P., Marsh, E., Staedke, N., and Slocum, A., 1995, “Shear Damping of Advanced Ceramic Structures,” Proc, 34th Conf. Metallurgical Soc. of CIM, Vancouver, B.C.
10.
Segalman, D., and Reamy, P., 1989, “Prediction and Measurement of Damping of a Laminated Beam with a Constrained Viscoelastic Layer,” Sandia Report, SAND88-2551, UC-32.
11.
Slocum
A.
,
Marsh
E.
, and
Smith
D.
,
1994
, “
A New Damper Design for Machine Tool Structures: the Replicated Internal Shear Damper
,”
Precision Engineering
, Vol.
16
, pp.
174
–
183
.
12.
Torvik
P.
, and
Strickland
D.
,
1972
, “
Damping Additions for Plates Using Constrained Layer Viscoelastic Layers
,”
Journal of the Acoustical Society of America
, Vol.
51
, pp.
985
–
991
.
13.
Ungar
E.
,
1962
, “
Loss Factors of Viscoelastically Damped Beam Structures
,”
Journal of the Acoustical Society of America
, Vol.
34
, pp.
1082
–
1089
.
This content is only available via PDF.
Copyright © 1998
 by The American Society of Mechanical Engineers
You do not currently have access to this content.